Gridview Control - Connection String?

Nov 18, 2010

I am using a gridview control (.aspx page) that has bound columns. I have a sqlDataSource that connects to oracle. The userid and password is saved in the sqlDataSource control.

Code:

<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>"
SelectCommand="SELECT BO_SECID, CUSIP, PRICE FROM QRM_MBS_CURR_EOM WHERE SETTLEMENT_DT > AS_OF_DT"
</asp:SqlDataSource>

Question: When I deploy to a different region (like from Development to Test region), using MSI install, how can I change the connection string (because the userid and password are different in different regions).

View 4 Replies


Similar Messages:

Provider Connection String Of Entity Framework Be Substituted With A DB Connection String Already Defined In Web.config?

Feb 2, 2011

I have a db connection string 'ApplicationServices' defined in the connectionString section of web.config and 3 Entity Framework connection strings which have the provider connection string attribute with the same connection string as the one in 'ApplicationServices'. Is there a way to reference connectionString in 'ApplicationServices' for the provider connection string attribute of the EF connection string in the web.config, rather than providing the connection string all over again?

View 1 Replies

How To Read Web.config Connection String From User Control

Feb 24, 2011

how to read web.config connection string from a user control in C#?

View 2 Replies

How To Access Connection String From App_code Folder In 3.5 Update Panel Of Gridview

Jan 25, 2011

i am making an application in which i have stored connection string in security.cs file under app_code folder...all is my application is going well except update panel of gridview using sql datasouce..i dont know what to write in connection string .. i mean i have connection string in class file.. so what to write in aspx page so that it will get the connection string from app_code

[Code]....

View 2 Replies

Web Forms :: How To Access Connection Connection String From Sub Folder Web.config File

Mar 15, 2011

just for my testing purpose i know i can define both the connection's outside in a single web config file by different name's and access them in my front end according to it but what if i want to have seprate for both connection's web.config situation is like this see image so i want to access my connections from second web config file how i can do that.

[Code]...

i tired this but its giving error

[Code]....

View 1 Replies

Web Forms :: How To Set Default Connection String Among Multiple Connection Strings

Jul 4, 2013

In my application there are 4 connection strings...from that i want one connectionstring should be default connection string.How to do ?

View 1 Replies

Making Ado.net Connection Class Or Connection String In Web.config?

Oct 18, 2010

I am preparing for an Access2007 db conversion at the beginning of the year and would like to know what the best process would be for connecting to the sqlserver2005 database. I have read about adding the connection string to the web.config file. I have also read about using ADO.NET and put the connection information into a class and not the web.config file.

I would like to hear from others as to what you have used, are using, or plan on using for a webapp (vs2010), and why so I can get an understanding.

View 3 Replies

VS2010 - Connect To SQL Using Trusted Connection In Connection String

Aug 10, 2011

I have an ASP.Net website running on IIS7. The Application Pool is set to ASPv4 Classic.

Authentication Mode is set to ASP.Net Authentication & Windows Authentication

My question is, when I want to connect to SQL using a "trusted connection" in the Connection String, what user will actually be passed into SQL?

I thought it would pass my logon details, but it is coming back with an NT AUTHORITYANONYMOUS LOGON error, which seems to point towards it not passing in my logon.

View 8 Replies

Null Reference Using .toString / Convert The Object ConnString (a Connection String) Into A String?

Feb 13, 2010

on VWD 2005 this code works fine, but on 2008 it says I haven't created an instance of the object. I want to convert the object connString (a connection string) into a string.

'This acceses the virtual directory web.config file for connection strings
'We have to convert the object to a connection string
Dim rootWebConfig As System.Configuration.Configuration
rootWebConfig = System.Web.Configuration.WebConfigurationManager.OpenWebConfiguration("/VirtualDirec")
Dim connString
As System.Configuration.ConnectionStringSettings
connString = rootWebConfig.ConnectionStrings.ConnectionStrings("ConnectString1")
Dim strConnString
As
String = connString.ToString().......

View 5 Replies

DataSource Controls :: Variable Connection String Parameter In A DataSource Control

May 20, 2010

I have several web forms which use a GridView linked to a DataSource control which is defined at design time as follows:

<cc1:pgsqldatasource
id="dsStates"
runat="server"
connectionstring="<%&#36; ConnectionStrings:PgSqlConnection %>"
oldvaluesparameterformatstring="Original_{0}"
providername="<%&#36; ConnectionStrings:PgSqlConnection.ProviderName %>" >
</cc1:pgsqldatasource>

As you can see, the connectionstring parameter is defined to a specific connection string name and I need to be able to set such a parameter to a different value, for example, to a session variable content.

View 1 Replies

VS 2008 Simple Gridview Control - Connection To SQLServer Not Working

Dec 1, 2011

I have a simple .aspx page. Where I need to connect to sql server 2008 and show the records on the page in a gridviewcontrol. It will have Edit button on the gridview control. I am getting some weird message about the connection string.

Error message is:
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.ArgumentException: Keyword not supported: 'initial catalog'.

Web.config file:

Code:
<connectionStrings>
<add name="ConnectionString_SqlServer" connectionString="Data Source=PricingDB;Initial Catalog=DB1;Integrated Security=True;Connect Timeout=300" providerName="System.Data.SqlClient" />
</connectionStrings>

In the .aspx page this is how I am connecting.

Code:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString_SqlServer %>"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>"
SelectCommand="select name, value from dbo.Pricing order by name asc"
>
</asp:SqlDataSource>

View 2 Replies

C# - Connection String Using?

Apr 28, 2010

I have an ASP.NET project which gives me the following exception if I try to run it Where should I "call" it before I can use it ?There is no global.asax in my solution

View 3 Replies

ADO.NET :: Connection String And DAL?

Dec 13, 2010

Project 1: Web Application (.aspx/.ascx/.cs/)*
Project 2: Class Library (has one static class, Repository.cs, which is full of static methods used to put/get data to/from DB)
Project 3: Web Service (allows few of the mthods of the Repository to be used via WebService)

Conditions:

There will be about 10 copies of Project 1 (WebAppliation) runngin on IIS each for a seperate client.I want each copy of Project 1, and the Web Service to read/write data from/to DB via Repository only. So all 11 Projects (10 Project 1, and 1 Wb Service, will be using repository as DAL)Questions1) Where shall i put the connection strings??? because each web application will have its own connection string, i cant save it in repository. And if i keep it at the web.config of each project, then what is the best way to pass it to repository?


2) Repository.cs is a static class with all static methods, is this a good approach? Should it be static? or should i not make it static in order to allow creationof objects of Repository.cs. (this way may be i can also send connection strings to the objects
of repository, in whatever project required...???)

View 6 Replies

Connection String Is Being Ignored

Jul 18, 2014

I have an ASP project that works fine locally. It makes use of a dll that gets information from a database. I set this up using the datasource wizard, which is not how I like to do things. I find it to be a bit opaque, and this problem is a fine example. When I publish the website, I get an error that ultimately shows this:

Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.]

That suggests that it is not using the username and password, so I went to the App.Config file in the dll, which is the one place that has the connection string that I know of (normally, I'd do it in code and it wouldn't be there, but I'm doing something new). If I change the DB name to a DB that is very similar to the correct one, then run one of the queries, it correctly complains about a few missing columns. As long as I use the correct DB name, then it works (there's a production DB and a dev DB. The two are identical except that I haven't added a few columns to the tables in the production DB). This shows that the connection string is being at least partially used.

However, if I alter the password, such that it is invalid, I have no problem running the query, which suggests that the username and password are being ignored, and my own local credentials are being used instead (or at least that's the going theory as to why I can connect just fine when the password is wrong). The credentials are set up correctly as far as I can determine. That portion of the connection string are copied directly from a different project that works fine.

So, despite having credentials that should be valid, the dll appears to be steadfastly using my local credentials and ignoring the ones in the connection string in App.config. I would assume that this has something to do with the datasource wizard, which I don't use.

View 13 Replies

Getting Connection String Out Of App.config

Feb 1, 2011

I added a database to my project. When I did so an app.config file was added to my project. (Yes I know I have dangerous info in the connection string. I shall change that but for now I am messing around with test stuff.)

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
</configSections>
<connectionStrings>
<add name="NyStories.Properties.Settings.storyConnectionString"
connectionString="Data Source=|DataDirectory|story.sdf;Password=driver;Persist Security Info=True"
providerName="Microsoft.SqlServerCe.Client.3.5" />
</connectionStrings>
</configuration>

I did a google search on how to get the connection string value and found. string sConn = ConfigurationSettings.AppSettings["ConnectionString"]; I am getting a warning that this is obsolete. It has been replaced by ConfigurationManager.AppSettings. Ok Fine. According to the docs, it is also in System.Confiuguration which I already have a using statement for above. But when I attempt to use it, it is not part of the assembly.

View 4 Replies

MVC :: More Than One Connection String In Web.config?

Feb 14, 2011

My web application has to retrieve database from more then two difference sql server.

for example, one from localhost, one from different server ip.

all firewall setting was finished, but i just dont know how to code and use it.

here is my web.config :

[Code]....

this defines only one database in my localhost.but i need to call different connection strings each time i need.

how do i implement this?

View 4 Replies

MVC 3 Connection String Without Sqlexpress

Mar 11, 2011

Split off from http://forums.asp.net/t/1646657.aspx/1?MVC+3+Tutorial+Movies+database:

I have the same problem here.No matter what changes I make in the connection string, in the Web.Config file, MVC3 tries always to connect to the SQLEXPRESS database that I do not have. I am running the 2008 SQL Server Standard Edition on my desktop.

How and where can I replace the reference to SQLEXPRESS by one that allows me to connect to my local database?

View 3 Replies

Configuration :: How Does IIS 7 Gets The Connection String

Jun 17, 2010

I have created a ASP.NET 4 application in VS 2010 using Silverlight and RIA Services.

After finishing the first release on my development pc, I'm starting some deployment testing in a server in my local network.

After sucessfully published the web application using the Visual Studio FTP publishing option, I notice two strange things:

1 - On the IIS properties of the website I have uploaded my files to, you can see now a connection string, named as LocalSqlServer that points to the aspnetdb.mdf database file. I had a look in the web.config file and I could not find this connection strind defined there. So, where is it located? Where did IIs got it from?

2 - As the aspnetdb.mdf file is not deployed withtin the web application and I a musing SQL express in my testing server, where can I drop the mdf and ldf files so they can be attached when the applicaiton runs? I know I can perform an attach operation using management studio,but I'm wandering where is the DataDirectory folder ASP.NET looks for to attach it at runtime?

View 4 Replies

Get Values From Connection String

Sep 20, 2010

i have a sql connection string being stored in the web.config.

how can i pull items liek server name, username, password... insode of c# asp.net code?

View 4 Replies

SQL Server Connection String?

Mar 10, 2011

total noob question here. I'm toying around with Silverlight, and need to connect to a database. When I connect in server explorer (VS 2010) it works fine, because it's using my windows account to authenticate. However, when I start debugging the server side stuff is running on a different account (NT-SERVICE or something to that effect) which has no privileges on the SQL server. I've tried embedding my username/password like this:

connectionString="Data Source=.;Initial Catalog={DATABASE};Integrated Security=True;User={DOMAIN}{USERNAME};Password={redacted}"

but it doesn't seem to be working. I keep getting an error:The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.

View 2 Replies

C# - Use The Same Connection String When Using NHibernate?

Feb 15, 2010

I have just re-implemented an ASP.NET web application that uses NHibernate to use a session per request (using an IHttpModule). The SessionFactory is created at the start of the application using a connection string from the web.config file. The SessionFactory is then stored and sessions created and released using a thread-safe, lazy singleton.

This means that if say 20 users are using the application the same user (as specified in the connection string in web.config) is used when creating any connections to the database - is this best practice? Will SQL Server Express complain about the number of connections eventually? (as connections are created and released per request this may not be a concern in practice).

In my old architecture a connection was created using the user name of the current user - is there any advantage to this (perhaps if there is are security restrictions for the logins of each different user).

When using a thread-safe, lazy singleton (like below) which contains the SessionFactory and manages sessions, I believe this is available site wide wide e.g. 2 users accessing the application from different PCs will use the same instance?

public static NHibernateSessionManager Instance
{
get
{
return Nested.NHibernateSessionManager;
}
}
private class Nested
{
static Nested() { }
internal static readonly NHibernateSessionManager NHibernateSessionManager =
new NHibernateSessionManager();
}

View 2 Replies

ADO.NET :: Change Connection String Of EDM?

Mar 22, 2011

I have a entity data model generated from a database schema. Now that database is no more physically available, I want to generate a new database with the same schema model. I'm able to generate the tables from the script that the Entity Frame work generates for me.

I have two problems. I'm not able to generate the stored procedures from EDM. Second, I'm not able to change the connection string to the new database. Do I have to re-generate the edm from the new database that I'm trying to create?

View 1 Replies

How To Store The Database Connection String

Feb 16, 2010

I know that most people store the Database connection string inside the web.config file.

But my question is if we move the web.config file from dev to prod then we have to change the connection everytime.

how can we have a connection string that we do not have to change when we move our code from dev to prod.

View 4 Replies

How To Change Connection String For Mdf Database

Dec 31, 2010

i have create users and rolls and all thing work very good on my computer but after upload view exception

Code:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) how can i change connection string for mdf database

View 1 Replies

Read Connection String From Web.config

Jan 28, 2011

I called the string in my Data layer

string connectionName = System.Configuration.ConfigurationSettings.AppSettings["Connection"].ToString();

now how could call it in SqlConnection con

View 11 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved