I have Connected an XmlDtaSource to a TreeView with checkboxes.I want to populate the user permissions in that.
<asp:TreeView ID="TreeView1" runat="server" ExpandDepth="2"
ShowCheckBoxes="All" ShowLines="True">
<DataBindings>
<asp:TreeNodeBinding ValueField="Value" DataMember="menuNode" TextField="title" />
I have a treeview in my .aspx: <asp:TreeView ID="tvDocCatAndType" runat="server" /> Not much else going on in the page -- two <asp:LinkButtons> and one <asp:Label>; the page is a child of a master page, so these controls are within a <asp:Content> control. I populate the treeview in code -- just 3 node levels, including the root node. All nodes have checkboxes, and I initialize all node.Checked to true. I have some Javascript to do the usual check/uncheck up and down the tree as parent and child node checkboxes are toggled.
No matter how many checkboxes I clear in the UI, on postback every single node has node.Checked = true regardless of the state of the checkbox in the UI. This is not the first time I've used a treeview, but I've never had this problem before. I created this page by light adaptation of an earlier project that works fine.
I have a asp.net treeview control that I need to be able to set a parent node to partially checked to show that child nodes are checked. Basically I need a 3 state or multi-state checkbox. All I can see from looking through the code is ways to set checked true or false.
View 2 RepliesI using TreeView with ShowCheckBoxes="All" in an ASP.NET 3.5 web application and for some reason the checked nodes are not returned in order. Lets say I have nodes A,B,C and I select B and C and hit the save button and when I check the CheckedNodes property of the Treeview the checked nodes are in order (B,C). But the next time when I go back to the page and select the node A the order is being returned B,C,A. What could be the reason for this behavior?
View 1 RepliesI have declared the Treeview Like below
[Code]....
and added the items to parent node and child Nodes Now how i loop through the treeview to get the checked items?May i have to find the checkbox in treeview and then loop through the treeview and find if Checkbox is checked then print the name suggest me best practice for getting checkbox checked treeview Nodes
i have radgrid in my asp.net web page with some columns and rows in each row i have some checkbox that they are in one column. so i have one checkbox in each row and column.
i want when the check box checked, write in header that checkbox(in that column) write the number and so in that row, write the diffrent number. i want it occure client-side.
I have treeview with checkboxes.
[Code]....
when i check Treenode with Text='Velocity', all the three child nodes will get checked. I want only the count of child checked nodes. How can be it done.
In my Treeview i have for all nodes checkboxes.
parent
child
leaf
leaf
leaf
parent
child
leaf
child
leaf
1. when i check leaf - i want to have checked child and parent too
2. when i check parent - i want to have checked child and leaf
---
3. on a save button i only want to save checked leaf to DB - if they are not checked delete from DB
the problem is actually in the subject. I have custom control that uses treeview. The control is added dynamically. Nodes for this treeview are populated on demand. Treeview nodes can be checked. I recreate this control on page load event, but still CheckedNodes is empty if checked nodes were added dynamically (added on demand).
View 2 RepliesI have the following code :
Html.CheckBox("creOpsSelected",
new
{id = "creOps"
, value = i.Value})
How do I set the checked property to True when creating the Checkbox
i can get the checkbox value from the stringBuilder by request.form["field_id"].toString(), but how can i make the checkbox checked property to checked using C#.
[Code]....
For the life of me I cannot bind the Checked property of a CheckBox control within a TemplateField (declaritively).
I have tried:
<asp:TemplateField>
<ItemTemplate>
<asp:CheckBox ID="deactivated" runat="server" checked="<%#Eval("Deactivated")%>"></asp:CheckBox>
</ItemTemplate>
<asp:TemplateField>
And
<asp:TemplateField>
<ItemTemplate>
<asp:CheckBox ID="deactivated" runat="server" checked="<%#Eval(Container.DataItem, "Deactivated")%>"></asp:CheckBox>
</ItemTemplate>
</asp:TemplateField>
</asp:TemplateField>
I keep seeing a warning stating: Cannot create an object of type 'System.Boolean' from it's string representation' 'for the 'Checked' property.
I have a CheckBoxList in my page, with the DataTextField and DataValueField attributes set, is there an attribute that I can use to specify a property that indicates if it should be checked?
I'm hoping to just set the datasource, and not have to have any code behind to set the checked property. Possible?
I have a check-box-List which I bind to a master dataTable(DTA)... I have another dataTable (DTB) which has the values that needs to checked in the check-box-List... So I loop through all items in the check-box-list to see if it exists in the DTB and set checked = true for those items that exists. Now I want to show the checked items first in the Check-box-list box and the unchecked items below that. Is there any way I can do it... A similar solution for List-Box could also be helpful. A Javascript hint is welcome too.
View 1 RepliesI think this must be easy... I need to read if a certain checkbox is checked or not, but it's mandatory to me use the findcontrol.Can someone help me ? maybe it's just necessary to complete the code bellow:
Control cb = FindControl(cols[i].id_coluna.ToString());
I used below code fo radiobutton to inserting data in database
string price = RadioButton2.Checked ?"1": "null";
SqlCommand _cmd = new SqlCommand("insertproduct2", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
_cmd.Parameters.AddWithValue("@Price", price);
_cn.Close();
Now I use same code for checkbox I want if users checked chekbox in table insert "1"
else insert "Null" but when I wrote below code
string Off = checkbox1.Checked ? "1" : "null";
it make error Under checked attribute it didn't recognize Checked attribute here. what should i do?
Using CheckBox in DataList to set checked property
View 3 RepliesI have a web form with two RadioButtons, both use the same GroupName, both have AutoPostback enabled and both have an event handler for CheckChanged. I use tem to show/hide a Panel further down the form which is contained in an UpdatePanel with Conditional Update set and with both CheckedChanged events in the Triggers collection:
[Code]....
Now, the problem arises when I set the Checked property of either RadioButton in Page_Load, which results in the even not firing for the button which was marked as Checked (the event for the radio button whose property was not assigned does get fired). In fact, upon inspecting the source there was no 'onclick' attribute declared for the input element that was marked as checked in the Page_Load, whereas the other RadioButton did have the 'onclick' attribute properly set.
The layout of the form doesn't allow me to place the radio buttons within the UpdatePanel, so that is out of the question. Is the behavior explained above normal? am I missing anything? Both events fire once the assignment to the Checked property is removed from Page_Load.
I have a GridView control that has one column of checkboxes set up like this:
<asp:TemplateField>
<ItemTemplate>
<asp:CheckBox ID="RowCheckBox" runat="server" Enabled="false" Checked='<%# (bool)DataBinder.Eval(Container.DataItem ,"Associated") %>'/>
</ItemTemplate>
</asp:TemplateField>
Then when the user clicks an Edit button I run a script that enables all the checkboxes (which works fine), and then when the user then clicks on a checkbox the tick is appearing or disappearing as it should.
The problem I'm having is that when I try to read the value of the checkbox from the codebehind:
CheckBox checkBox = (CheckBox) row.FindControl("RowCheckBox");
bool checked = checkBox.Checked;
If the value bound to it was true then checked is still true, no matter if it was toggled or not.
Edit: Corrected a spelling mistake. Question still stands though...
if tree node does not have tag property like windows treeview control then i just want to know how could i attach the tag property with each tree node.
View 1 RepliesI have a calendar control that has a checkbox control added to each cell on dayrender. A user will check the dates that they want to add an event for and click a button that will display the modaldialog box where the user will enter the event for the selected dates. I'm having trouble looping through the calendar dates to get the checkbox contol's checked property.
View 2 RepliesI came across the following given a asp.net page containing
<div id='test'>
<input type='checkbox' id='ch1' name='ch1' runat=server />
<input type="button" id="view_test" />
</div>
and the following jquery code to show this div in a dialog
$("#view_test").click(function() {
$("#test").dialog({ show: 'slide', width: 600, title: 'View Check' });
});
If view_test button was clicked, initializing the dialog, before the form post backs the checkbox ch1.Checked property in .Net is always False. However if you just postback without initializing the dialog it works as expected.
I have a ASP.Net page that has a gridview control. This gridView control has a checkbox controls. I would like to assign a boolean value from a database field to the Checked property- Checked='<%# Bind("RESULTS") %>'.
When page loads,I get error - Specified cast is invalid!
The code is as follows...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="dsResults"
BackColor="White" BorderColor="#CCCCCC" BorderStyle="None" BorderWidth="1px"
CellPadding="3" OnRowUpdated="GridView1_RowUpdated">
<Columns>
<asp:TemplateField HeaderText="COMPLIANT" SortExpression="RESULTS">
<EditItemTemplate>
<asp:CheckBox ID="CheckBox2" runat="server" Checked='<%# Bind("RESULTS") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:CheckBox ID="CheckBox1" runat="server" Checked='<%# Bind("RESULTS") %>'
Enabled="False" />
</ItemTemplate>
</asp:TemplateField>
Note: If a constant value is passed at design time it works fine. But i want to assign the value at runtime using Bind.
Environment details: VS 2008, ASP.NET 2.0 and .Net Framework 3.0 & C# language.
I tried returning values like 0s and 1s, Ys and Ns and True and False from a database field. But i still get the above mentioned error.
I tried retreving the value in OnRowDataBound event using Eval, since Bind is not available in code behind. But it would make the field readonly and i cannot edit and update the Results field.
Even though there is a value returned by the query why does the Checkbox does not assign the value using <%# Bind("Results") %> to Checked property instead throws error - Specified cast is invalid.
how i can edit and update Checkbox.
where did the Bind method of ASP.Net 1.x is moved? How can i use Bind in code behind of ASP.Net 2.0?When i type DataBinder the intellisense shows Eval and other stuff but i don't see Bind that would solve the problem of two- way binding.
I have a DropDownList for suppliers; suppliers can be active, or inactive. I have a checkbox to toggle between all suppliers, or just active suppliers.
My front code is:
[Code]....
My back code is:
[Code]....
BindDDL() also gets called in page load. The checkbox is unchecked by default, so when I first navigate to the page, only the active suppliers will be selected. When I click the checkbox, the page post posts back, but doesn't change the data in the DropDownList (still only active suppliers).
I've run through the debugger and it's hitting the right if statement, just not updating, and I don't know why. I've tried a Show all/active dropdownlist and event handlers, and neither do what I want them to do. How do I fix this?
Fix: BindDDL() method
I have a gridview where i have a radio button. What i need is to on the selection of the radiobutton i have to find the datakey of the gridview. Also one more issue with that is , i can select more than one radio button, which should not happen.
View 1 Replies