How to make authentication on Software in .NET
I am new to .NET and C#, but I am very crazy to know tat how to authenticate an application, which we made in C# - .NET so that when we distribute it to the people, the people must authenticate either for the first time or always.
I am using forms authentication in a MVC 2 project.
I have this in my web.config:
<authorization>
<deny users="?" />
</authorization>
I want the /Content folder to be available to users that haven't been authenticated yet. The login view uses the css in that folder, which should be available at login time.
We've got some WCF services we're hosting via IIS. The application in general uses Forms Authentication, and we'd like to continue making that available for web service clients. We just have a <authorization><deny users="?"> in our web.config and some authentication/redirection goodness that gets everything done.
The problem is we'd like for users to be able to access the metadata for the services without authentication. Can they visit /services/v1/ArtifactService.svc?wsdl anonymously and yet still require authentication for /services/v1/ArtifactService.svc/rest/GetArtifacts?studyId=123? If so, I can't figure out the right incantation in the configuration.
The best I can think of is to set an absolute URL in the metadata service behavior, but then I have to doctor the path on install anywhere we deploy. (<serviceMetadata httpGetEnabled="true" httpGetUrl=[URL]
I've built a asp.net 3.5 web application and want to be able to restrict access to particular pages. I have pages which should be able to be accessed by a user and then an adminshould be able to access all pages. I have created 2 Active Directory groups, one for normal users and one for admins so any users in the user group can see some pages then admins should have no restrictio
View 1 RepliesJust going to start making a web application and was wondering which was better, or at least what are the main differences between them (as it probably matters what I am using them for)?
View 3 RepliesI have just installed SQL Server 2005. I selected windows mode authentication. I am not able to login in management studion. Now, I want to use mixed and server authentication option inplace of windows authentication. so, would that be possible after installation.
View 2 RepliesThis could be very straight forward for some of you, but I got caught up. I am doing very simple test - browsing from IIS Manager to see the default page or "under Construction", however I am being challenged to provide my login credential . When I provide my login credential, I am able to see the default page. I wanted to see the default page without providing my credential since Enable anoymous access + basic authentication I am simply wanted to see the default page asit is working on other servers except this one. I have included screen print to make sure may question is clear.
View 3 RepliesWhat's the difference between Basic Authentication and Integrated Windows Authentication in IIS?
View 3 RepliesI set authentication mode to Windows in the web.config and I enable Windows Authentication and disable the Anonymous Authentication in IIS 7 on win 7, but HttpContext.Current.User is always null.It works fine when I host the web app in IIS 6.0.
View 1 Replies'm using the AutoCompleteExtender from the AJAX control toolkit on my aspx page - I have it wired up to a WCF service that is returning a string array and everything works happily.
If I change my service definition to include a demand for the caller to be authenticated, like so:
<OperationContract(), PrincipalPermission(SecurityAction.Demand, Authenticated:=True)> _Public Function GetLookupValues(ByVal prefixText As String, ByVal count As Integer, ByVal contextKey As String) As String()
Then the autocomplete extender stops working, and I get an authentication error in the service. The service is set up to use ASPNetCompatibility mode, and I was hoping that the extender would pass the authentication credentials for my logged in user - does anyone know how to make this work?
What do I need to do in order to change an application from Forms Authentication to windows authentication?
View 2 RepliesI have a database which has form authentication tables for an website [let say website A], now I have attached a new website [Website B] to the same database, in this website [Website B] also I have to provide login/authentication which would be separate from the website A authentication system. So I want to have separate table for the users of new website. Specification:
[code]....
will there be any open source membership provider like we have .NET membership provider [form authentication].
I have a web farm web project, and want to make sure windows authentication is working well without any problem in web farm, can any one give me some web sites or information about that?
View 1 RepliesAm going to develop authentication part in the web site. I want my authentication module should not be hacked by any one and also want in secure side.
View 1 RepliesI needed information regarding the capabilities & integration of AzMan tool with Asp.net.Currently, I got a Sharepoint 2007 website along with ASP.NET 2008 where I am using Form Based Authenication.Now, the requirement is any user within a domain registered in AD should be able to login in website through intranet.
Can I acheive this using AzMan, or I need to create two websites one with FBA for internet users and the other one for the intranet users with AD authenication. Also my intenet website is deployed and in use where usermapping and roles are already created, so using this tool what will be the impact on existing webiste.
I have a web application (intranet based) which uses Windows Authentication. Unfortunately there are public computers that have public logins at some company locations. My web app doesn't support these public logins because I need to know the user workingSo, even though these public users are windows authentication users, my app will fail because I have no user account setup for that particular account. I want to then try Active Directory Authentication.In my Default.aspx.cs I'd have something like this
protected void Page_Load(object sender, EventArgs e)
{try
userContext = new UserContext(); // If the authenticated user isn't a user in my system then throw an exception
}
[code]...
I have developed the authenticated rss feed using the basic http authentication for my site.I also have the admin module for the site which uses the Asp.net Forms Authentication .Both are in the same project.When i turn on the forms authentication module to None in my web.config.My rss feed authentication works fine(the browser pop up the dialog box for the username and password) and upon entering the username and password the rss feed gets displayed.But with forms authentication turn on when i click the rss feed link i am getting redirected to the administrator login page.
If i set my authentication mode to none than the feed works like dream but the admin module do not work as it uses forms authentication.
How can i resolve the conflict for that one.I am using the asp.net mvc filter on my feed contoller to pop up the dialog box for the username and password.
[Code]....
I've been asked to convert an asp.net application from forms authentication with roles using the aspnetdb database to use windows authentication instead.
what is required to do this? can I still use the roles defined in the app and stored in aspnetdb?
I have an (ASP.NET 3.5) intranet application which has been designed to use forms authentication (along with the default aspnet membership system). I also store additional information about users in another table which shares its primary key with the aspnet_users table.
For users who are part of our domain I store their domain account name in the secondary users table, and I want to automatically log in users whose domain account name matches a name stored in the table.
I have read the guides which are available - they're all from two years ago or more and assume that you are able to activate Windows Authentication on a separate login page that allows you to extract the domain account name. From what I can tell, though, this is not possible in IIS7 (the overall authentication method is applied on all pages and cannot be selectively deactivated, and both authentication methods can't be applied on the same page).
Is there a way of getting IIS to pass through the windows domain account name of the requesting user? I don't need proper AD authentication, just the domain name.
We have a non-SSL ASP.NET web app that allows a user to login (ASP forms authentication, inproc).
Once authenticated, we redirect their browser to an external, SSL secured page on another web site / domain altogether that we do not control.
The client is redirected back to a pre-configured url on our original http web app when done.
However, the customer is then asked to "re-login" again on our side which is undesired...
It seems the forms authentication cookie is destroyed when transitioning between HTTP and HTTPS and back again.
How can I keep the forms authentication cookie alive so that the customer does not have to re-authenticate on the round trip?
I'm developing an internal booking sytem. Users log in to the sytem and can view existing bookings and search for bookings. They can also create new or edit existing bookings. When completing such actions I need a confirmation prior to completing the booking or updating the recorded. The confirmation is based on a reauthentication of the user.... in otherwords he needs to enter his passord again.
How can I achieve this? The system is internam and I'm using Forms Authentication. I an also using roles as som of the admin forms can only be viewed by administrators.
Is it possible to disable windows authentication on one or more subfolders of an ASP.net application using windows authentication?
For example:
A website contains several other folders that contain parts of the overall application: /frontend,/backend, /login
The bin folder is on the same level as these subfolder, i.e. the root of the website.
All of these subfolders contain pages that use binaries that reside in the bin folder of the root of the website.
The user must input windows credentials when visiting a page in the backend folder, but not when visiting a page in the login or frontend folder.
I would like to make a custom accordion, in which I have 2 panes, but where you couldn't open the second one until you clicked a validation button in the first one that would open the second...
I tried to just make a button that would hide the first pane but I cant get to make it work.
[Code]....
[Code]....
The webapp I am trying to deploy will have the IIS running on the same server as database.I have been assigned a domain account and have been asked to connect to the database using this account.I am not sure how to go about making the connection. I cannot enable impersonation as I need to mention the username and password and it will be security concern, also I need to give write permission onC:WINNTMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files (which is not allowed)The Webserver and SQL server runs with system account.Can you please let me know how to establish connectivity to the server using the domain account without mentioning the password anywhere.
View 1 RepliesI have a user control is shown through a SimpleModal popup (JQuery), this user control gets some data from database and displays them (the details of a record).
The problem is that this user control makes a round-trip to gets the data every PostBack for the parent page even it's hidden.
I wonder if I could make it gets its data only if the popup is appeared.
I tried to put it inside a Panel with false for Visible property and change it to true when I open the popup, but it stil call Page_Load which gets the data from database!
