How To Reference Web User Control
Jun 10, 2013
I have created a web user control. It contains a table that has several image buttons. I want them to behave link a tab control. Here's the souce view:
Code:
<%@ Control Language="VB" AutoEventWireup="false" CodeFile="ProcessMenuContrl.ascx.vb" Inherits="ProcessMenuContrl" %>
<table >
<tr>
<td><asp:ImageButton ID="imgCustomerInformation" runat="server" CausesValidation="false" ImageUrl="~/Images/TabButton_CustomerInformation.jpg" /></td>
[Code] ....
From another page, I have placed this user control into the main content of the form. I have registered it at the top of the page:
Code:
<%@ Register src="ProcessMenuContrl.ascx" tagname="ProcessMenuContrl" tagprefix="uc1" %>
Here's portion of the source where you can see the control is placed under the MainContent of the page. :
Code:
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" Runat="Server">
<link href="Styles/QuoteStyles.css" rel="stylesheet" type="text/css" />
<uc1:ProcessMenuContrl ID="ProcessMenuContrl1" imgOrderInformation="" runat="server" />
When the user saves information that's on a form from this same page, I want to enable one of the image buttons (imgOrderInformation).
The problem is that i don't know how to reference this image button that's on the user control.
I've been trying to use Findcontrol, but must be doing it wrong.
View 15 Replies
Similar Messages:
Feb 17, 2011
I am trying to assign user control from another user control ..first time its binding control successfully but when we refresh the data its giving error
saying "Object reference is not set an instance".
how to refresh data from another user control ...
My senerio below :
1 Aspx page
2. User control
calling usercontrol databinding method from aspx page but once it get refreshed ,not allowed to bind it again..
View 2 Replies
Mar 11, 2010
my user control i m calling the web service i added script manager in the web page how to add service reference in user control
View 2 Replies
Jul 15, 2010
i am trying to enter a value into a texbox that is placed inside a user control called CollectionRequest. i have referenced this user control in my code behind and created an instance of it but i seem to get the above error when i try to enter some manual text. code as follows:
protected CollectionRequest collReq;
protected void Page_Load( object sender, EventArgs e )
{
collReq = (CollectionRequest)LoadControl("~/CollectionRequest.ascx");
TextBox _txt_address = (TextBox)collReq.FindControl("txt_Address");
_txt_address.Text = "thisi is an address";
control has been referenced in source file
<%@ Reference Control="~/CollectionRequest.ascx"%>
i am caling this code in my Approval.ascx.cs code. both the user controls are displayed together in the default.aspx page one above the other.
View 11 Replies
Feb 2, 2010
Here is the contents of my test.ascx file:
<%@ Control Language="C#" AutoEventWireup="true" CodeFile="test.ascx.cs" Inherits="UserControls_test" %>
<p id="XXX">aaa</p>
and here is the contents of my test.ascx.cs file:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
public partial class UserControls_test : System.Web.UI.UserControl
{
protected void Page_Load(object sender, EventArgs e)
{
this.XXX.InnerHtml = "BBB";
}
}
I get an error when I refer to the id, "XXX" (underlined above) in code behind which reads: 'UserControls_test' does not contain a definition for 'XXX' and no extension method 'XXX' accepting a first argument of type 'UserControls_test' could be found (are you missing a using directive or an assembly reference?)
I have tried XXX.InnerHtml and I have tried this.XXX.InnerHtml and get same problem.
How do I successfully refer to ID'ed HTML elements in code behind?
View 2 Replies
Oct 19, 2010
I am stuck into a problem, i have a user control ProductListing.ascx that contains ListView binded to an object datasource, SelectMethod and SelectCountmethod are provided as well. Everything works fine but the problem started when i add another user control declarativlly Filter.ascx in the productListing.ascx. I want to assign value to a public property MaxPrice in Filter.ascx. I am trying to set this property in the SelectMethod of ObjectDataSource. Usercontrol "Filter.ascx" throws null reference exception when i try to set its MaxPrice Property.
I tried to acced the usercontrol in Databind method of ListView , it is accessible here but viewstate is empty at this point, i saved the value in viewstate in SelectMethod of objectDatasource but i cant access viewstate in ListView Databind. Its empty. Its a simple code and no rewriting to viewstate elsewhere.
Important: My Codebehind files are in a seperate project and .ascx files in seperate project
View 1 Replies
Mar 8, 2010
I' m using a web custom control to upload images and mark them as primary. all the flow is working fine but it fails to mark images as primary in a diffrent category(there are four categories in which we can load a image-,catalog,primary,misc).It works in - category but not in others when I debug it is failing at a condition in grey . If it is not an element of the Datalist item it would not even enter the loop. I' m lost and unable to find the reason.
View 2 Replies
Aug 11, 2010
Usage :
[code]...
The problem is it gives me following error :
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 21: {
Line 22: base.OnInit(e);
Line 23: _ContentTemplate.InstantiateIn(BodyControlSpace);
Line 24: }
Line 25:
View 3 Replies
Jul 7, 2010
I'm looking to create an instance of a user control programatically in a codebehind of a web site*. The only ways I've found to reference the class of the user control programatically have been:
Register the control in the web.config and drop the control on the page (works, but I don't want the control on the page as I want to dynamically add it). Add a <%@ Reference Control="Name.aspx"> to the aspx page at the top.
I would want to have any aspx page reference the control without having to put the <%@ Reference> declaration at the top of each page. I know I can "Register" controls in the web.config so I don't have to do that on every page, so I'm wondering if something similar exists for references. I'm almost certain I'm missing something about the whole registering/referencing concept, so perhaps just an explanation of what the best way to do this is in order.
*Web-site type project and not web application if this matters.
View 1 Replies
Jun 4, 2010
I don't think I understand fully how ASP.NET does inheritance of controls.I have a user control, ucBase, which has an asp.net label in the ascx file. Code behind references the label and it works fine during run time if the control is not a parent for another user parent.
If I have another user control, ucChild, inheriting from ucBase, the label in ucBase's code is always null. ucChild has no controls in its ascx fileThe server controls (like the label) needs to be declared in the ascx file and not created programmatically.What needs to be done for ucBase to see its own controls when it's a parent user control?
View 1 Replies
Sep 16, 2010
MSDN documentation says that the ScriptManager class is part of the System.Web.UI namespace and I see that I can create a ScriptManager object programmatically. However, I don't see the ScriptManager control on the front-end. Do I need to reference the Ajax Control Toolkit dll in order to have access to control?
View 6 Replies
Jun 18, 2010
I'm trying to get a reference to the user object in my Global.asax file's Application_BeginRequest. I'm using the property Context.User but I get a NullReferenceException. Is it possible to get a user object reference in Application_BeginRequest?
View 2 Replies
Sep 10, 2010
I've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?
View 5 Replies
Feb 18, 2011
I'm attempting to create a simple menu user control just as outlined here.
The attached code results in an "Object reference not set to an instance of an object" error, but I can't figure out why.
<%@ Master Language="VB" CodeFile="MySite.master.vb" Inherits="MySite" %>
<%@ Register src="Controls/Menu.ascx" tagname="Menu" tagprefix="my" %>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">......
View 1 Replies
Jun 11, 2010
I have to access the parent form's controls inside an event handler method on my user control's code behind.
View 4 Replies
Mar 10, 2011
I have a web user control that represents a simple message box. It is used to display simple messages like "Item has been deleted", or "The item was saved successfully".
On the other hand, I have another web user control that represents the item in the form of an editable form (I made this a user control because this is used in two different pages). I want to embed an instance of the message box user control inside the editable form. I am writing this right after the @Control directive:
[Code]....
Instead of using @Register directives, I register the user controls in web.config and so far this has worked just fine.
With the above markup, the project compiles, but whenever I try to navigate to a page that contains this construct, I get an HttpParseException exception. Furthermore, Visual Studio states that the tack w7rc9:MessageBox doesn't represent a known control.
What am I doing wrong?
View 2 Replies
Feb 3, 2010
I have a custom control that is based off the gridview control located at: here The control is basically a gridview that automatically creates a column of checkboxes that can be used to "check" individual rows in the gridview. During the gridview's "CreateColumns" event, the "checkboxcolumn" is created dynamically. The checkboxcolumn also contains another checkbox in the header that is used to "select/deselect all" checkboxes in the column. Since the gridview does not automatically remember the state of the checkboxes in the checkboxcolumn on postback, I added a method to the control called "SaveCheckBoxState" which stores the indexes of the checked rows in Viewstate, and then I modified the "OnRowDataBound" event to check the Viewstate and reset the checkboxes based on the Viewstate.
I then added a call to "SaveCheckBoxState" in the gridview's OnSorting and OnPageIndexChanging events. This works great so long as I'm sorting or changing pages. However, I need it to update the viewstate everytime someone clicks or unclicks one of the checkboxes. At this time, the checkboxes are rendered with an onclick event that calls some javascript to highlight the row, or in the case of the checkbox in the header, to select/deselect all checkboxes. I need to call the "SaveCheckBoxState" method from the javascript used by the customcontrol, or I need to find a way to modify viewstate from javascript and perform the same action as "SaveCheckBoxState".
I've tried adding the "SaveCheckBoxState" to the onclick event declaration in the checkboxes, but when run, it simply tells me that the method is undefined. It doesn't exist in the parent page, and I don't think I should have to make an event for the parent page to pass the click to. It seems to me this should be all self contained within the custom control. Does anyone know how I can acheive this? Here is the code for the gridview OnPreRender event where the onclick event of the checkbox is set:
protected override void OnPreRender(EventArgs e)
{
// Do as usual
base.OnPreRender(e);
// Adjust each data row
foreach (GridViewRow r in Rows)
{
// Get the appropriate style object for the row
TableItemStyle style = GetRowStyleFromState(r.RowState);
// Retrieve the reference to the checkbox
CheckBox cb = (CheckBox)r.FindControl(InputCheckBoxField.CheckBoxID);
// Build the ID of the checkbox in the header
string headerCheckBoxID = String.Format(CheckBoxColumHeaderID, ClientID);
// Add script code to enable selection
cb.Attributes["onclick"] = String.Format("ApplyStyle(this, '{0}', '{1}', '{2}')",
SelectedRowStyle.CssClass,
style.CssClass,
headerCheckBoxID);
// Update the style of the checkbox if checked
if (cb.Checked)
{
r.BackColor = SelectedRowStyle.BackColor;
r.ForeColor = SelectedRowStyle.ForeColor;
r.Font.Bold = SelectedRowStyle.Font.Bold;
}
else
{
r.BackColor = style.BackColor;
r.ForeColor = style.ForeColor;
r.Font.Bold = style.Font.Bold;
}
}
}
View 1 Replies
Jul 16, 2010
I want to convert windows user control into web user control..I have the usrDataView.cs..I need to convert this file into usrdataview.ascx.can anyonr help me?...how I can convert the file...Is any method is available..
View 1 Replies
Jun 3, 2010
have two user controls on one aspx page. UC1 has a grid which contains a link button column which user clicks. Based on the value of clicked cell, I need to show some data into UC2.How do I pass data from UC1 to UC2? How do I invoke a function of UC2 from UC1?
View 2 Replies
Apr 16, 2010
All I would like to be able to do is include one user control within another! Is this possible? I have spent the last hour searching the internet and it seems that I can't find a single thing.
In classic ASP it would be something like:
<!--#include file="EditProject.ascx"-->
I tried this but no luck!
Parser Error Message:
There can be only one 'control' directive.
Source Error:
[Code]....
Line 1: <%@ Control Language="VB" AutoEventWireup="false" CodeFile="EditProject.ascx.vb"Line 2: Inherits="Controls_WebUserControl" %>Line 3: <form runat="server">
View 3 Replies
Mar 5, 2011
It's simple to create both user control from the two world : ASP.NET+Razor or MVC 3.0.But i do not known how to consume the user control FROM the razor"_layout.chtml" page.I want to put such thing within the layout page: <uc:MyTag Prop1="" Prop2="" />So i need to declare this directive at top of the layout file : <%@ Register TagPrefix="uc" TagName="MyTag" Src="Controls/Mytag.ascx" %>
View 1 Replies
Sep 2, 2010
Null Reference Exception was not handled by user Object Reference not set to instance of an object
View 2 Replies
Oct 22, 2010
I have 2 controls within my master page that I am using. One is to display user information (which is static), and the other is to display basic data associated with that user (which is not static)
I am trying to use the page load of the non-static control to activate a panel within the static control, rather than activating the static control everytime I do a page load.
So I have the following structure:
[code]....
Currently I am using the Page content to control the control 1 and control 2.
Instead of repeating that code on every page content page, can I make control 2 deal with control 1 or vice versa?
View 2 Replies
Feb 26, 2010
I have a user control which contains two text fields each assigned with requiredfield validators this control contains another user control contains say a button .On click of this button i need to validate the fields from the parent control text fields.I try the Page.Validate("ValidationGroup") with Page.IsValid it validates but the error message is not shown .Error message is shown only if i try to validate it from the contains which contains the required field validators ?
View 1 Replies
Jul 13, 2010
Now the weird thing is I have a user control UserControl1 in which I put some JavaScrdipt logic there, and I have another user control UserControl2 and I registered both in the page called Page1.aspx.I would like to call the JavaScript function resided in UserControl1 from UserControl2, however, I got an error saying the function is not defined. I think both user controls are loaded before I use them then I think the JavaScript function can been seen anyway in that page.
View 1 Replies
