How To Stop The Whole Page From Executing Again When Doing A Postback

Sep 27, 2010

firstly i am not really an ASP.Net developer but i do work in C#.

Anyway one of the application that i develop has an ASP.Net section and i need to amend it.

I want to add a Checkbox which when Checked by the User will set a Session variable.

This Session variable will then be accessed on another page where it will include/disclude some SQL and therefore change the behaviour of a Search.

So i have 2 Pages - Page1 that has the Checkbox on it -

HTML

Quote:

[code]....

1, How do i stop the whole page from executing again when doing a postback ? I only want the Changed Event to run not the whole page

View 11 Replies


Similar Messages:

Web Forms :: Pesky Enter Key / Stop The Buttons On The Master Page From Executing Unless The User Mouses Them?

Feb 7, 2011

I have a page with several asp buttons defined on a Master Page. I only wish these buttons to be activated when they are selected by the mouse click. I have one button on the content of the form, that is the button I want to execute if the user hits enter and it is selected or they use the mouse. So in a nutshell. how do I stop the buttons on the master page from executing unless the user mouses them?

View 1 Replies

Web Forms :: How To Stop Page From Getting To Top Position On PostBack

May 7, 2015

I am using GeoMap in my website, and GeoMap is little below in Web Page.I am using filters in GeoMap, i.e., when user selects any station and clicks on "button", all the locations related to selection shows in GeoMap. But everytime when I filter and click on button, page loads and scroll upward then again to see the filteration result in Geo Map, I had to scroll down my page.I want that when I filter any station and click on button, page should stick to that GeoMap section. It should not go upward until user scrolls the page.For this I tried using "Update panel" but then GeoMap javascript is not working.

View 1 Replies

Web Forms :: How To Stop Executing Code Behind File

Sep 7, 2010

Using Javascript i am validating a textbox data.when validation fails i need to stop executing code behind file.How to proceed.

View 3 Replies

MVC :: Stop Code From Executing In Initialize() Method?

Jul 29, 2010

in my controller I have code that validates URL. if not valid I want it to 301 redirect:

[code]....

but this still goes continues on and executes any code after. how would i simply 301 redirect? and NOT continue to process any code after break;?

View 3 Replies

Security :: Stop Malicious Javascript From Executing?

Jun 15, 2010

I have a web application where I want to stop any malicious JS to execute.

For example:

http://www.mywebsite.com/default.aspx?ID=<script>alert("hello")</script>

If a client does the above then an alert box pops up on the client screen. How to stop that.?

Also I have set validateRequest="true" in the machine.config but still the JS does get execute.

View 5 Replies

AJAX :: How To Stop ModalPopupExtender Flickering On Page Load And PostBack

May 7, 2015

I used popup in my page below is my code:

<asp:UpdatePanel ID="Upbdt2" runat="server">
<ContentTemplate>
<asp:ModalPopupExtender DropShadow="true" ID="ModalPopupExtender2" PopupControlID="PnPopup2"
runat="server" TargetControlID="BtnPopup2">
</asp:ModalPopupExtender>

[Code] ....

When I click on BtnPopup2 it show popup menu...

I have other button BTNinsert that when I click on this button it insert data into database now problem is that when I click on  BTNinsert it show popup for 1 second  and after that insert data into  database and if I refresh page it shows popup again for 1 second I want when I click on BTNinsert or refresh page it doesn't show popup just for a second...

View 1 Replies

Web Forms :: Stop Postback After Imagebutton Click On Page Validation Error?

Nov 20, 2010

i have some textbox that i validate with a customvalidator control (only, and must be, server side function) and i have an imagebutton control for submit.I must stop the postback if there are some errors in the validation function.I set the validation property argumets.isvalid = false in the customvalidator function but doesn't work, the postback continue.i have tried to set the imagebutton property postbackurl = "" in the validation function but doesn't work.

View 8 Replies

Forms Data Controls :: Stop Executing Delete Action?

Apr 1, 2010

if I am running a detailsView_Deleting code and a condition is not met and I want to Cancel the delete, how do I code it?

View 4 Replies

Web Forms :: WCF - When Connection Time Out In The Calling Client - How To Stop Service From Executing

Jun 16, 2010

I have a WCF service that processes some input arguments and retuns result in approximately 4 minutes. Sometimes the calling client may get request time out before the WCF service answers.

Now, my customer is asking me to stop processing on the service side when the client got timed out. Since, I could not know the status of cleint on the service, I could not stop the process.

View 1 Replies

Textbox Always Trigger Postback Event With Autopostback - Stop Postback By Enter Key?

Jun 8, 2010

I have 2 textboxes and a submit button inside a .net composite server control. I tried to only postback when submit button is clicked. I set autopostback = false for both textboxes. But either one still trigger submit button's onclick event by hitting "Enter" inside textbox. How can I stop postback by enter key?

View 2 Replies

Stop Other Sub Proc From Executing After Error "database Is Not Available"

Jan 31, 2011

I am having a problem with my try catch block runs in the error "dastabase is not available". My problem is the try catch runs and catches the error, but it will not redirect to my error page. The code continues to execute the other subs. I have tried adding: exit, return, response.end. None of them worked.

Imports System.Data
Imports EUC
Imports System.Threading
Imports System.Data.SqlClient
Partial Class mpMain
Inherits System.Web.UI.MasterPage
Dim strSQL As String
Dim objData As clsDataAccess = New clsDataAccess()
Dim ds As New DataSet
Dim t1 As DataTable
Dim intSecurityLevel As String = 0
Dim strUser As String = UCase(Right(HttpContext.Current.User.Identity.Name.ToString(), 4))
Protected Sub ExpandNode(ByVal NodeName As String, ByVal PageName As String)
'More Code
End Sub
Protected Sub ExpandNode2(ByVal NodeNameMain As String, ByVal NodeName As String, ByVal PageName As String)
'More Code
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not (IsPostBack) Then
Try
strSQL = "Select SecurityLevel from tblSecurity where SFID = @SFID order by SecurityLevel"
Dim MyParameters1 As SqlParameter() = { _
New SqlParameter("@SFID", SqlDbType.VarChar) _
}
MyParameters1(0).Value = UCase(Right(HttpContext.Current.User.Identity.Name.ToString(), 4))
ds = objData.SQLExecuteDataset(strSQL, CommandType.Text, MyParameters1)
t1 = ds.Tables(0)
Catch ex As Exception
Dim sendError As New clsExceptionMessage
sendError.sendMessage(ex.Message, Request.Path, strSQL)
Response.Redirect("ErrorMessage.aspx", False)
End Try
End If
End Sub
Protected Sub TreeView1_TreeNodeDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.TreeNodeEventArgs) Handles TreeView1.TreeNodeDataBound
'More Code
End Sub
Protected Sub TreeView1_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles TreeView1.DataBound
'More Code
End Sub
End Class

View 1 Replies

Web Forms :: RadioButtons Executing Server-side Code On Every Postback?

Jun 1, 2010

I have a user control with a dozen radion buttons in it.Every pair of radio buttons execute a Sub on server side.All of the radio buttons have the autopostback set to true.There is a public Sub of the usercontrol that gets called only once by the page and loads the data setting the radio buttons to checked or not checked.The problem is, that once a radio button is set, it will execute it's server side code on every postback even if the postback is caused by another control on the usercontrol or even another control on the page. So if all the radiobutton pairs are set and a postback is caused, there will be six server side Sub executing! Casting the sender in each of those Subs gives back the radiobutton that is checked at that point, so it's if on every postback the event is fired for each checked radiobutton.

View 2 Replies

How To Stop Button Postback With If Function

Jul 6, 2010

i have a button that will check whether textbox1.text is empty or not. I have put a if function inside the btn_click event and look like this

Code:

If TextBox1.Text <> Nothing Then
''Will COMMIT if everything OK
MsgBox("OK Popup userCon2")
Else
End If

May i know what shpuld be the code inside the else statement if i do not want the button to create a postback and just do nothing?

View 3 Replies

Stop Postback After Using JQuery Dialog?

Dec 6, 2010

I have a JQuery Dialog that is opened when a button is clicked. The first time around, it should do a postback, but when the dialog closes and I click the refresh button of the broswer, it sends the data again and duplicates the data I just entered. Should I add a return false somewhere so it doesn't postback when the dialog is closed. Here is the script:

[code]....

View 3 Replies

Stop Postback For RadEditor With Spellcheck?

Jul 7, 2010

When I use a RadEditor I want to enable the editor's spell check (working thus far). After a spell check the user can either click on the radmodule (toolbar thing) to either "finish spellcheck" or "cancel." Which is all fine and dandy except the "finish" button causes a postback!! I don't want that at this point!! "cancel" more or less does what I want to happen - I mostly just want a "done" or a way to stop the postback.

I've tried an Update panel but that just grays out the text area after it does the update.

View 2 Replies

Web Forms :: Stop PostBack In DropDownList?

Oct 19, 2010

I hve few values in my Drop Down List

[Code]....

i want when ever i Select the Value-"Select " it should not postback it PostBack me when ever i Select the value ("Select Again")

can't use Ajax right now other alternative would be javascript

View 5 Replies

VS 2008 - Postback Is Clearing Fields - How To Stop This

Jun 8, 2010

On my form I have a button that pops up a panel to select an option from. It does a postback to fill in a textbox with the selected data. The other controls such as other textboxes and dropdowns are reset. Any way to stop this? Or do I have to save the settings and set it back on the postback?

View 4 Replies

Web Forms :: If A Textbox Is Not Valid Stop Postback?

Aug 10, 2010

i have a textbox where the user needs to type in his phone number and the submit the detials but if the textbox is les than 8 caracters and he or she clicks the button

then it must stop that button doing a post back and refresing the page

is this possible herei an expamle code

[Code]....

View 5 Replies

Web Forms :: Stop User Leaving Before Postback?

Mar 13, 2011

I have several functions running on a postback that can take a little time to complete.When postback is initiated I show a loading image with this code:

[Code]....

I want to be able to add code to this function so if user tries to leave at this point they are informed the operation is not complete.I found this code:

[Code]....

This works but I only want the code to be active when the loading image is active.I tried the following but it shows the alert message when the page eventually posts back:

[Code]....

View 2 Replies

Web Forms :: Stop Postback On Button OnClientClick()?

Feb 24, 2011

is it possible to stop postback Button OnClientClick()

[Code]....

[Code]....

[Code]....

so everytime it's displaying me result even if i do postback

thing is that i know i can use validator control's to validate my textbox ,but i am using some custom validations which needs to be checked before submitting of a form.

only that why i m using OnClientClick()

so i want is it possible to Control Postback it should occur only after a OnClientClick() event validationa re truel

View 5 Replies

Web Forms :: Stop Button Postback With If Function?

Jul 6, 2010

i have a button that will check whether textbox1.text is empty or not. I have put a if function inside the btn_click event and look like this

[Code]....

May i know what shpuld be the code inside the else statement if i do not want the button to create a postback and just do nothing?

View 9 Replies

Web Forms :: Stop Postback If Selected Value In Dropdown List = No

Oct 14, 2010

I want to stop postback if a certain value from a ddl is selected.

I've used VB to create a page whereby if a certain value from a ddl is selected then a hidden panel becomes visible. The problem is the likely answer to a majority of my ddl's is 'No' (or a no type response), however, even though the panel visibility remains false upon selecting No a postback still occurrs, the page refreshes and moves back to the top. I suppose this is a question with 2 possible solutions (or 2 questions rather)

1: Is there anyway of setting postback to false if selected value = No? A typical example of how my code appears is below

[Code]....

(i've used the value '1' to represenet Yes)

2: Is there a way of setting the page position after postback? As you can see in my code above i've set the focus on the next control (being a Radio Button) but i mean, is there an actual way of defining where the scroll bar is set?

View 6 Replies

Forms Data Controls :: Stop Postback In GridView Rows

Jan 8, 2010

I have a Gridview inside and UpdatePanel, Rows in this Gridview contains a DropDownsLists, each row has this attribute:

€œe.Row.Attributes["onclick"] = ClientScript.GetPostBackClientHyperlink(this.GridViewPJ, "Select$" + e.Row.RowIndex);", to select rows on mouse click.

If i click on the dropDownlist Contained by the row, this algo launch a postback, so I can never see this DropDownList deployed.I need a Way to stop this postback. Is teher a solution for this?

View 1 Replies

AJAX :: Stop AutoComplete SeviceMethod With Normal PostBack Button?

Dec 13, 2010

I have a textbox with an autocomplete extender.The user types in a few chars and usually gets a few to a few hundred suggestions back.And its pretty quick.This is on a formview control at the bottom by the paging. It is for a "Go to" feature.But it is returning the suggestions from the same list of search results from the previous page.(It's really the same page but I just toggle the visibility between the GridView Results and the FormView details).And if they select "All Tickets" its possible to get 5000 results from the search.
Now the autocomplete is really doing the same search as the search results did which is like 46 seconds. And then weeding it down further with the prefix (chars they type in the autocomplete textbox).I have a Return to list button. And I want the Button to interrupt, stop, cancel, abort, or somehow just not wait for the WebMethod to finish, and do a PostBack right away.Since btnReturnToList is a normal postback I can't really use PageRequestManager to check if in async or last postbackelementId or anything.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved