HttpHandlers / Modules :: URL Rewriter Causing A "500 Internal Server Error"
Apr 1, 2011
I've set up URL Rewriting per Scott Guthrie's guidance (Scott's blog - Approach 3: Using an HTTP module to perform extension-less url rewriting with IIS7) and I'm using Url Rewriter.
OK, so it was a piece of cake to setup and everything runs perfectly on the dev server (cassini). I was all excited and put it on the production server and it immediately choked - the site won't even load and instead gives a "500 internal server error"
Production server is a shared hosting environment running IIS 7 in integrated mode , ASP.net 3.5 and SSL.
I have another HTTP module installed called Security Switch , which I disabled to remove it from the equation. I don't think that affects anything since it was already running fine on the dev server and prod server, but I'm not 100% sure and wanted to throw it out there if that helps diagnose.
I've followed the setup instructions precisely, triple checked everything in web.config and I can't figure out what I'm doing wrong. I'm guessing it must be getting stuck in the IIS 7 pipeline somewhere. Can the SSL have something to do with it?
View 4 Replies
Similar Messages:
Feb 8, 2011
If a user enters "<" or if it already exists in a textbox inside an update panel, I am getting "internal server error 500" during post back. I believe the page suspects a HTML injection and is attempting to stop it. I could use Page.EnableEventValidation to avoid it but I really don't want to do that. Is there any other way, I could resolve it (like replace < with > or something like that)?
Update:
This is happening in a textbox inside a gridView.
[Code]....
View 2 Replies
Aug 7, 2010
I have this code in Global.asax but it not firing once an error occured:
[Code]....
View 2 Replies
Jan 27, 2011
I am using the following code to export a Gridview to an Excel spreadsheet. It works great until I select more than 10 records. At the 11th record I get an error on the line of code that reads....GridView1.RenderControl(hw)The error reads....RegisterForEventValidation can only be called during Render(); Description:An unhandled exception occurred during the execution of the current web request.Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.InvalidOperationException: RegisterForEventValidation can only be called during Render();Source Error:
[Code]....
Sub:
[Code]....
[Code]....
View 3 Replies
Oct 20, 2010
i have doubt i have a .ashx file is in project called ShowImage.ashx,Currentely i am using this file for to show to show images in uploading area used to immediately show image after uploading it to the uploader on the web page
here some part of my code
event on UPLOAD BUTTON CLICK
HttpPostedFile File = FileUpload1.PostedFile;
.....
............
Image1.ImageUrl = "~/ShowImage.ashx?id=" + id;
but now i want to pass the user id containg textbox value to this .ashx file(it is an int Value not string) how can ito send my textbox int values to .ashx file and receive the result
View 1 Replies
Mar 19, 2010
I have using code provided by this article :
[URL]
It works fine with IIS 7.0 on localhost but when i upload my site and try to access the rules written for url rewrite it gives me error message of 404 ..
here is my web.config file the require changes for Windows server 2003 IIS 6.0
[Code]....
View 5 Replies
Oct 29, 2010
I need to access image files (.jpg) on a server other than the web server my app runs on. I would like to use an httphandler to do this but I am unsure of the syntax to specify the path. I have tried mapping a drive on the web server to the file server but that didn't work. I have tried using a UNC path but that did not work either.
View 1 Replies
Jul 19, 2010
I am in a situation where i need to design a mechanism where i want my server to access files from a file server. There's gonna be another desktop application who will be talking to this file server.
View 8 Replies
Oct 29, 2010
I want to send a file by converting it into binary file to the client end and then it should be read by javascript which again I am passing to the OCX method.(like my OCX method accept only the binary data so i have to transmit binary data from server side to client).
View 1 Replies
Sep 3, 2010
Server cannot append header after HTTP headers have been sent
[Code]....
[Code]....
View 2 Replies
Jan 25, 2011
I want the rewrite url to work on the virtual dedicated server. so when someone enters the url without extension like http://megafastline.com/feedback , it shud display the contents of the page feedback.aspx
The code work perfectly fine in the localhost, but when i uploaded this on the godaddy dedicated virtual server and hit http://megafastline.com/feedback , i m getting
page cannot be found!
This is my code below
in webconfig file
<httpModules>
<add name="UrlRewrite" type="UrlRewrite" />
</httpModules>
and a class in app_code called UrlRewrite.cs;
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
[Code]....
View 2 Replies
Nov 28, 2010
I have a 3.5 app with a subfolder containing numerous documents. I want to control access to all files in this subfolder via an ASHX handler. My file system looks like this:
/Default.aspx
/web.config
/Filecabinet/Filecabinet.ashx
/Filecabinet/web.config
The content of the web.config in the files folder is simple:
[Code]....
This works fine on my WinXP / IIS6 developement box, but doesn't work at all when I upload it to my IIS7 / shared hosting account (GoDaddy). I know it doesn't work because I can access every file in the subfolder - the restrictions I wrote in my ASHX code-behind aren't taking affect at all.
View 3 Replies
Jan 26, 2010
After adding a custom module, Module list is showing MyModule "Entry Type" as "Local".
and Entry Type of all other modules is "Inherited".
what is Entry Type and difference between "Local" and "Inherited"?
View 4 Replies
Jun 8, 2010
is httpmodules executed each and every time in request and response cycle ?? if Yes is it possible to disable a specific http module ??
View 3 Replies
Jan 17, 2011
URL rewrting is not working when I shift the site from windows 2003 to 2008 server i.e from IIS6 to IIS7.I added the aspnet_isapi.dll to Handler Mapping. still it is not working.
showing me page not found 404 error.
View 3 Replies
Jul 20, 2010
This is kind of cross-post; however, can a custom http handler be automated to run either using a timer or a filesystemwatcher to post an xml document to another server (with no human interaction)?
View 2 Replies
Mar 31, 2010
I've tried to implement two different solutions that use either and HttpModule or and HttpHandler to do URLRewriting for me. These work great on IIS 7 within my local development environment in Integrated and Classic modes. Currently the production server is running IIS 6.0 on a shared hosting environment. It appears that the request at least hits both the Module and Handler as the URL above redirect to the particular friendly url, but it doesn't redirect and hit hte Module or Handler again. Instead I get a 404 error for the friendly URL.
View 2 Replies
Apr 26, 2010
So I've read quite a few posts about how to do this, and it's still getting me. I'm trying to control access to a directory, but I continue to get a null session error. I'm doing my check in PostAcquireRequestState
[Code]....no matter where I put this, my session always comes back null. I am using IRequireSessionState on the class as well. Am I pulling the context wrong?
View 6 Replies
Mar 29, 2010
why I'm getting this error? I just re-created (not migrated) my app that was in ASP.NET 1.1 to ASP.NET 2.0. Whole app works perfectly. The only problem I'm getting with this piece of code for the Web Services. I'm running both versions at the same time side-by-side and it works fine in 1.1 and doesn't work in 2.0.
URLName = Context.Request.Url.Segments
URLName0 = URLName(0)
URLName1 = URLName(1)
URLName2 = URLName(2)
URLHost = Request.UserHostName
URLStr = "http://" & URLHost & URLName0 & URLName1 &
"SomePage.aspx?" & "SectionID=" & SectionID
' Create a 'WebRequest' object with the specified url
Dim myWebRequest As WebRequest =
CType(WebRequest.Create(URLStr), WebRequest)
' Send the 'WebRequest' and wait for response.
Dim myWebResponse As WebResponse =
CType(myWebRequest.GetResponse(), WebResponse)
Bam! Error! The remote server returned an error: (500) Internal Server Error.
View 11 Replies
Nov 9, 2010
In IIS we have a virtual directory (named as "Documents") with in application virtual directory (named as "Reference") that points to an shared folder.All the files with in the "Documents" folder are listed and opened by the user (by clicking on the file name) with in the application
"Reference" application runs under an application pool. This application pool is configured to run with an Active directory account. This AD account has been granted write and modify permissions on the shared folder that contains the html files.
When user tries to open any of the html file located with in the shared location from the application following error is thrown.
System.Net.WebException: The remote server returned an error: (500) Internal Server Error
I tried to browse to the location manually and I can see the required files there.
These files where accessible from our application until yesterday. But we started encountering this error from today.
Is there any IIS settings that needs to be modified?
View 4 Replies
Jun 28, 2010
I have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
View 1 Replies
Apr 12, 2010
I have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
View 6 Replies
Apr 20, 2010
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
View 9 Replies
Mar 22, 2011
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
View 2 Replies
Sep 20, 2015
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
View 1 Replies
