JQuery :: Show A Modal Dialog After Execute Command_click Event
Jul 19, 2010I want to show a modal dialog after execute command_click event to inform user ("saving complete").How I can call jquery modal dialog from codebehind?
View 16 Replies
Similar Messages:
Show JQuery Modal Dialog From Serverside?
Mar 2, 2011this is the first time i'm using jQuery dialogs so this question might be somewhat simple but i haven't found answers on this yet.
I'm using ASP.Net Ajax to perform an asynchronous postback when user enters something into a Textbox(actually scanning a barcode). This is working like a charm.Now i need to let the user decide between two options under certain conditions. Therefore i need the postback to decide if this dialog must be shown and what content it has.
Q: How to open a jQuery UI (modal) dialog from serverside, let the user choose an option, postback again to server and handle this decision.
I think i need AjaxControlToolkit.ToolkitScriptManager.RegisterClientScriptBlock to register the script that opens the dialog, am i right? If yes, what script opens the dialog onload?
Can i then postback to server by setting AutoPostback=true on the control(f.e. RadioButtons or a DropDownList)inside the dialog and handling the appropriate events?
What is the best/easiest way to accomplish what i'm trying?
Edit: I considered to encapsulate the dialog into an ASP.Net UserControl and show/hide it. Is this approach recommendable or will it conflict with jQuery in any way?
[Code]....
JQuery :: Show / Hide Modal Dialog Box On Page Load?
Oct 19, 2010[Code]....
show / hide modal dialog box on page load?
JQuery :: Show A Modal Ui - Dialog When A Record Is Successfully Saved To The Database
Jan 18, 2011I would like to show a modal ui-dialog when a record is successfully saved to the database.
View 8 RepliesJQuery UI Modal Confirmation Dialog At C# / How To Prevent Trigger OnClick Event
Jan 20, 2010I am trying to use confirmation dialog from jQuery UI.
I ran into this problem: how to trigger correctly the dialog and at the same time prevent trigger OnClick event specified at button until user click on Yes or No buttons at dialog?
In the example below are two ways how to popup confirmation. Lower one works well. It's a classic JavaScript confirm dialog. When I try to use the jQuery UI dialog, it displays a dialog but allows it to run the event assigned at OnClick (here by using Command, but I suppose there is no difference. Hope I am not wrong.). The piece is taken from the ASP.NET Repeater control btw.
[code].....
Data Controls :: Show Details Of Hidden Column Of GridView In JQuery Dialog Modal Popup
Jun 16, 2015I am referring below url , there is one column which has some large data i dont want to show in grid, but on clicking show detail i want to show detail in Modal Popup, right now it shows blank data, is there any solution for it. URL..
View 1 RepliesData Controls :: Show GridView Selected Row Details Inside JQuery Dialog Modal Popup?
Dec 18, 2013How to show Gridview selected row in popup using Jquery asp.net 2010
View 1 RepliesMVC :: How To Show Logins In A Modal Dialog
Nov 22, 2010What is the easiest way to show logins in a modal dialog? I'd prefer using JQuery but whatever will show up the login page (in a partial?) whenever i decorate a method with [Authorize] would be great.
Ive been searching for the past couple hours and i cant find anything useable.
MVC :: Show Ajax Modal Dialog And Get The Data?
Dec 8, 2010what i want to do is that , i have html.actionlink and i want when the user click show a ajax modal dialog to it and get the data.
for example in my view INVOICES i have <%html.actionlink("Select Customers","actionresult","controller")%> and i want when user click the link , show the modal dialog who contain the list of customers. after the user click one customers come back to my INVOICES view with the ID of selected customers.
Using JQuery UI's Modal Dialog Inside .NET?
Nov 17, 2010Currently I have a project where I have a form in ASP.NET that needs a look up service. For example the input below wants a Customer ID, but maybe the user only knows the customers by name.
<input name="CustomerId" type="text" id="CustomerId" />
I'd like to use jQuery UI's modal dialog to append an image to the right of this input, which fires dialog("open") containing the necessary code to look up a customer by name, returning the ID back to the form input upon closing the dialog. This is extremely similar functionality to the Datepicker's icon trigger found here: http://jqueryui.com/demos/datepicker/#icon-trigger .Right now, I have this javascript:
$("#CustomerId").dialog({
autoOpen: false,
modal: true,[code]....
I need to be able to pass the ID of the input element into jQuery, probably using the $(this) selector somehow. I'd like to be able to re-use the same code for multiple elements on the same form that require the customer ID look up. I also don't know how to create this kind of functionality inside the ASP.NET environment because it doesn't fundamentally allow more than one form inside one .aspx page.
How To Populate JQuery Modal Dialog
Nov 30, 2010I have a application that contains a gridview. When a user selects one of the items from the gridview, I want to be able to show a jQuery dialog box that contains a form with some pre-filled information from the selected item from the gridview. Right now I have a div with some html text boxes that is set to be a modal dialog box. The user clicks on it, and the selected item's ID is easily to retrieve. The problem comes when I want to go out to the database, get some of the details, then pre-fill in some of the textboxes and other elements before displaying the dialog box to the user.
An easy comparison is having a user click on an item so that they can submit a form to be processed with some of the items from the selection already filled in. I was wondering what the easiest way to go about this is. Right now I have it so that selecting an item from the gridview uses jQuery to do a Ajax post with the ID to a [WebMethod] in the code behind where it can then go off the database and get all the details of the record. The problem is that for obvious reasons the WebMethod can't magically fill in the fields of the form. I could send back all of the information to the ajax query to fill in, but that also feels pretty messy because there is no real strong connection from the random data I send back and which field they belong to.
A lot of this is pondering out loud, but I am really interested in better understanding how to use jQuery and Ajax within ASP.NET.
JQuery :: ReCaptch - Jquery Ui Modal Dialog?
Sep 11, 2010I would like to have a contact form which contains a reCaptcha, and have that form inside a jquery ui modal dialog.
All works well, except that I have a submit button for the form - which closes the modal dialog wether the recaptcha is valid or invalid.
I tried adding onClientClick="return false;" to the submit button, but it still posts back, and closes the dialog.
how do I remain inside the dialog ?
Javascript - How To Make JQuery Dialog Modal
Oct 15, 2010I am using jQuery dialog in asp.net. It is working fine for me. The problem is when I open the dialog box, I can still work parent page functionality. I don't want that. Just dialog to modal and should not allow focus on parent page.
window.onload = function onloadFunction() {
[Code]....
Using Server Side Validators With Modal Dialog (jquery)?
Dec 2, 2010Is there a straightforward way to use server-side validation with ASP.NET's validation controls in a form that's displayed in a modal dialog? I am using jQuery and SimpleModal (in C#, VS2010, .NET 4.0)I've got a modal form which works fine. I need to use a server-side validation because the logic depends on data specific to the record being accessedMy solution for the project I'm working on now is to use a jQuery ajax call to pass all the form data to the server and get back the validation results before allowing the post to proceed. But this is relatively time consuming to implement, and in some situations I'm dealing with now all the validation code exists already.
The first challenge is that of course the modal dialog will close on a full postback. So you could put an UpdatePanel inside the dialog... without even thinking about this too much, though, I assumed that it wouldn't work out that well. It doesn't. And the form which opens the modal dialog to begin with is already in an UpdatePanel, which further confuses matters.Anyway, I tried putting the contents of the modal form in an UpdatePanel for the heck of it. It does actually do a partial postback, the dialog remains open, but the contents of the dialog do not get updated with anything I change server side. If I close and re-open the dialog on the same page after testing the validation code, though, its contents are in fact updated to reflect these changes. Obviously the way the dialog is rendered is confusing ASP.NET. Or vice-versa. But this just seems sketchy from the get-go.
Rather than trying to hack my way through this problem I was hoping that others had some suggestions about a better way to approach this. Or just tell me I'm trying to hard too mix apples and oranges and I should keep it all client side (or client side + jQuery ajax) if that is the only sensible thing to do.
How To Force A Postback On Button Inside A JQuery Modal Dialog (div)
May 7, 2010I think my title says it all. I have a modal dialog showing up and the user can make some changes and then click a 'Save' button. I need that to totally post back the whole page. I just assumed the button would fire off regardless of the jQuery.
View 2 RepliesJQuery :: Modal Dialog Not Triggered By Control Within Update Panel?
Mar 27, 2011I have a textbox txtPctDown inside an update panel. On textchanged, a sub is called that does a calculation and puts the result in to a label in a modal dialog. When the text changes, the sub is reached but the modal dialog doesn't appear. if I eliminate the UpdatePanel then everything works fine. I tried with an without using the textchanged as a trigger.
How do I get the modal dialog to appear when the text changes?
[Code]....
JQuery :: Firefox Doesn't Render Correctly Inside Modal Dialog
Jan 19, 2011I have tried searching for the answer but have failed to get any insight into this problem. Look at the following two examples. [URL] (JQuery modal dialog without <input> element) Above pages have very simple JQuery modal dialog, whihc displays correctly in IE, Chrome, Safari and Opera. Unfortunately, Firefox does not display the modal dialog with <input> correctly. It displays the other one correctly. I have tried the following without resolution to this peculiar problem:
- Changed doctype
- Used <table> to enclose <input>
- Used <div> to enclose <input>
- Used all possible CSS display attributes for <input>
MVC :: Partial View In Modal Dialog (using Ajax/jQuery) - How To Handle Invalid Modelstate
Mar 18, 2010After wading through quite a few articles on creating modal forms (using partial views and jquery) I got things working fine for my login....as long as you enter a valid login though!
What I did:
Created a partial view containing my login form.
In my action controller, the get action just return a PartialViewResult, which get dealt with by a bit of jQuery in my master:[Code]....
Like I said this works fine. Now the post action of my login check if it's a valid login, and if so send the user to the passed returnurl or the home page.
However, if the validation fails, I now return the partial view again, which work , but the partial get displayed by itself instead of rendering in the modal form that was opened by jquery.
AJAX :: Validation Summary In JQuery Dialog Modal Popup Box Not Working With Update Panel
Dec 23, 2015I'm using the ASP.Net Validation controls and I want to display the Validation Summary in a JQuery Dialog instead of the native javascript alert messagebox. I've found this solution (aspsnippets) by overriding the clientside WebForm_OnSubmit() function:
<script type="text/javascript">
function WebForm_OnSubmit() {
if (typeof (ValidatorOnSubmit) == "function" && ValidatorOnSubmit() == false) {
$("#validation_dialog").dialog({
title: "Validation Error!",
modal: true,
resizable: false,
[Code] ....
The WebForm_OnSubmit() function is being rendered by the BaseValidator control and in the form tag te following attribute is being added: onsubmit="javascript:return WebForm_OnSubmit();
I am running into a problem on a page which has an UpdatePanel. The input field with the validator (1 to make it simple) is in a Panel within an UpdatePanel. The Panel is set to Visible=False at the first Page Load. There's a button inside the UpdatePanel which makes the Panel with the Validator Visible.
When this happens, the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag are not being rendered because it's an AJAX callback and the form tag is outside the updatepanel (in a master page), so the validation summary will not be shown in the jquery dialog.
Validation is being performed, so the validation summary wil be shown in a div on a page, but the validation is not being called by the WebForm_OnSubmit() function in this case, because it's not being rendered.
Here's the markup of the page:
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Button ID="btnNew" runat="server" Text="New" />
<asp:Panel ID="pnlEdit" runat="server">
<table>
[Code] ....
So, when the validators are not visible at the first load and they will be made visible by an AJAX callback, the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag are not being rendered on the pag. Because of that, the WebForm_OnSubmit() function will not be called and the validation summary will not be shown in the JQuery dialog (although it is being shown in a div on the page). How can I get the Validation Summary to be shown in de JQuery dialog in this case?
Is there another function that has to be overriden for this case? I know I can use a Full Postback for the New button and then all the stuff needed is being rendered on the page, or I can make the panel not visible by using a style, but I don't prefer that because there are a lot of pages with this situation.
One solution is to use a dummy textbox with a dummy validator (with a dummy validationgroup) of which I set the display to none. Then this dummy validator will cause the the WebForm_OnSubmit() function and the onsubmit="javascript:return WebForm_OnSubmit(); attribute of the form tag to be rendered.
JQuery :: Show An Asp:GrgidView In Jquery Dialog?
Dec 21, 2010I'm assigning a div containing an ordinary grid view to the content of a jquery dialog, but the gridview is omitted from the dialog. I've tried even building the dialog fresh on a button click in case it's having a hard time binding to the data-refreshedgrid. No Joy.
function showDialog(headText) {
Web Forms :: Display Details Of DataList Item In JQuery Dialog Modal Popup On Button Click
Jul 7, 2012i want to display the details of datalist of partiicular row using jquery, on click of hyperlink "view" inside datalist item template .. i want to avod ajax popup modal
View 1 RepliesJQuery :: Show Ui Dialog On Postback?
Dec 28, 2010What's a good way to show an jquery ui dialog on postback ?
1. Create the whole div in on the server and populate an asp literal control and fire the required javascript (but when).
2. Use hidden fields for your values inside the div, fire the required javascript (but when).
3. Someone has another viable solution for me ?
JQuery :: Show Progress In Dialog?
Feb 23, 2011i want to show an jquery ui progress bar on my dialog so, itried below code but its continueosly showing the progress bar. what im doing is, in dialog aspx page_load event im just read some data from xml file and bind intot the gridview. untill bind intot the gridview i want to show this progress bar.
below is my code
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ProgressBar.aspx.cs" Inherits="GoogleJQueryUI.ProgressBar" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code].....
JQuery :: Show Gridview Within Dialog
Mar 4, 2011<div
id="div1"
style="width: 0px;
height: 0px;">
[Code]....
is my code. once the above event executed then from code-behind i'll bind data to the grdiview control and its binded but its not visible in the Dialog popup, may i know what is the problem with my code.
JQuery :: Show Dialog In The Page All Place?
Feb 23, 2011im displaying an Dialog, its working well. but when i scroll down the page then there the popup is not visible(it rendered where it is displayed),i want to show the Dialog on the page entire place even if i scorll down/up.
View 5 Replies