Loading Webpage Inside Another Web Page?
Apr 26, 2010I want to display a web page on the click of a button in another asp.net web page. how to do it using AJAX
View 1 RepliesI want to display a web page on the click of a button in another asp.net web page. how to do it using AJAX
View 1 Repliesi have an html page and i want to open it in an .aspx.
I need to made some changes in html before i show that in browser , and i need to make them in memory, so i open and load and make changes to my html Page and , now i need to pass that html string to iframe, but i am not able to do dat from code behind, iframe.innerHtml do not work.
I tried to set innerhtml for a div instead of iframe, that works , but here when browser renders html page, it applies my Html page style sheat on my aspx ( where CSS are defined for body ). Means the CSS for body that is in head of my htmlPage , sets on my aspx page.
We have installed a web site written by others which is compiled with Visual Studio 2008 and hosted in Windows server 2008 R2.
The IIS connection timeout is set to 120 seconds. But for some pages, the first page loading fails with HTTP 404 error but sequential refresh can bring the page up. The same problem happens for some images which fail to load in web pages. We are not very sure it is network related issue or hosting issue.
I have a web page that has lots of different parts to it (i.e many data grids). The page takes quite a while to load up because it is running all the stored procedures to populate each grid so the user is left waiting for the whole page to load.
I would like to improve this by loading the page a section at a time so that to the user is not left waiting for the whole page to load up before anythin can be viewed.
What is the best way to tackle this problem. Do i need to use threading or would i being going down the wrong path looking into that.
if I have a data grid on my web page along many other controls, and that datagrid is fetching some data while the page loading.
The page won't load until data grid finish fetching .
I want to show the page to user even thou data grid didn't finished loading and after it loaded it will show. I saw that on few sites, it has preloading bar.
I ma trying to load a usercontrol into a table. My usercontrol contains some literal controls.
I can't set the text of these literal controls to anythign, as in my code-behind of my control, whenever I try to access my controls, they come back as null.
My user control code:
[code]....
i am using Master Pages for my site(VS-2005). A page in my site gives user information about a city which he has selected from a drop down list. I want that when a user selects a city's name from a drop down list control, then a particular HTML file of that city should get loaded into that page. The ASP.NET page should remain same but only loaded file should change. If a user has chosen London then the HTML file of London should be loaded, if the selection is Paris then XML file of Paris should be loaded in the same Page. How can I do that ?
View 5 RepliesI have update panel on the page to avoid postback and placed a dropdownlist control within that update panel. DrodownList is filled with Category names and also it's autopostback set to True.
Now whenever dropdownlist index change's on select, untill page loads complete data it should show mesage as "Loading.... in center and middle of the page and background should become bit transparent". And when page load completely with data then that background and message should get disappear.
A portion of my site requires data from a web service, with takes 7-8 seconds. How can I load the rest of the website, show a Updateprogress for the data which comes from the service, than show the data once obtained trough a updatepannel. Some working project would be great.I need the server to retun the page before the data from service is obtained, and add that data later using ajax
View 1 RepliesI want to display a loading animation while my page is loading, and when loading is complete then obviously hide it.
I am working in ASP.NET using Masterpages, just wondering there is a a simple way of doing this using JQuery?
I have to load the values to parent page from the popup page. The popup page will be in another website(saparate server).
I used opener.document.getElementById('parentcontrolID'), this is working fine if i run in the local(i created saparate virutual directory for popup page website in my local machine) system the values are loaded properly. but Once i move to the different servers it's not working. getting this javascript error message "Object doesn't support this method or property" in the popup page bottom left corner.
What will be the problem.
Whether we can load the value to parent page from popup page even both are in saparate server?
I have a Controller set up for a certain View. This View contains 2 partial Views (ascx files). Each partial View has a Controller method that yields its DataModel. The containing View doesn't currently display any data, but just serves as a container for the 2 partial Views.
Here's the problem: The Index action of the containing View runs, but the Controller methods for the partial Views don't, so I get a null exception when the Model tries to render out the data that should be available. I'm using MVC 1.0, which is something of a bummer, since it seems that the next version is supposed to have something other than "RenderPartial" that will assist with this very issue. However, since I'm stuck for the moment with 1.0, can anyone give some advice on getting the Controller methods to run for the partial Views?
I have a scenario that I cannot fit my small brain around at the moment. I have a database driven site that also has a variable amount of user controls that go on to some pages. Some pages do not have user controls associated with them).
So I'm returning the page's body text from the data base like this:
The quick brown fox %ucUserControl1.ascx% jumps over %ucUserControl2.ascx% the fence.
I'm using a text editor for the backend that I'd like to be able to specify a user control in text format (by wrapping it in some sort of tag-- % was used for my above example, but anything will work).
How to load data inside modalpopupextender controls after button click event using server side function?
View 4 RepliesIs it possible to place .net code inside of a .html webpage?
View 3 RepliesTrying to figure out how to programmatically access the web pages in the application. Just something simple like a list of them would be awesome. I know I can create a list but I was wondering if there was something that could 'look' at the pages and add a new one to the list if you make a new page for the application.
Example with 7 pages:
Error
Default
Login
Content
Users
ContactUs
Admin
I am half awake so I may be a little unclear. Maybe puting it all in a single question will be easier.
How do you autogenerate a list of all webpages in your current application?
how i can load image in web page with image resolution step by step as my internet connection speed?
View 2 RepliesI am hosting a Windows User Control in my web page using <object> tag. Everything works fine when the control is outside the updatepanel and is independent of other web controls but when I move the control inside the update panel, it doen't load the user control properly.
<object id="myBrowser" classid="http:MyBrowser.dll#MyBrowser.UserControl1" height="20" width="400" VIEWASTEXT></object>
why it doesn't render the control properly and what can I do to fix it?
I tried moving the user control outside the update panel but since this user control is shown/hidden dynamically and is rendered based on other web controls which are inside an Update Panel, the user control is not shown at all.
I am experiencing an issue with the TreeView control when loading new pages. It is databound to web.sitemap, but when loading a new page, it does not select the node of the current page, just resets it to the root. THe new page loads fine, just not preserving the current navigation in the tree view.
View 2 RepliesIn my Home page I have a link to my Details page. When I click on the link it goes to the Details page Page Load Function like its suppose to, but when it finishes it goes back to the Home pages Page Load Function. Then loads the Details page. So it parses the old pages Page Load Function for somewhat no apparent reason, because in the end it loads the Details page. This only happens when I click on the link to my Details page. When I click on other links to other pages, it doesn't do this. For some reason only my Details page. I went through the code to see what could be causing this but have no clue. I included below the complete .aspx.vb for my Details page. What could be causing this? Again this ONLY happens when going to my Details page.
[Code]....
The problem with my web application is when ever i load the home page - The master page as well as content page loads ---This seems fine but when i navigate thorugh the website which have the same Master page but diffrent content page .... the master page loads again. What i want to do is ..I want to keep the master page intact and only the content page loads. How can I accomplish it..
View 3 RepliesI have a site where I am trying to implement a jQuery UI based MessageBox in my master page. Content pages are arranged accoring to business area folders, i.e. '~/Branding/Contracts.aspx'. I find that when I load such a content page, jQuery, which is referenced in the master page as below, does not load. I assume that this is because the browser is requesting 'Branding/Scripts/jQuery What can I do about this? I don't have the 'root' operator in a plain 'script' tag.
<script src="/Scripts/jquery-1.3.2.js" type="text/javascript"></script>
<script src="Scripts/jquery-1.3.2.js" type="text/javascript"></script>
<script src="Scripts/jquery-ui-1.7.2.custom.min.js" type="text/javascript"></script>
I want to avoid page refereshing or loding with the of jquery ajax. Here i am attatch my asp page code.
[Code]....
In this page I am trying to use jquery ajax on page loding but it does not give response .
need some info regarding button click. I want to send mail with autorespond mail on single button click. Within that waiting time I want a screen that will show "REDIRECTING" (like gmail) and will show a "thank you" page after successfully sending themail.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
[code]....
I have different projects and libraries for which I've created helpfile with Sandcastle. Now Sandcastle provides also the possibility to create a website.
What I would like to do is to create an aspx-page where I can dynamically create a menu and where the existing helpfile-websites can be sollicited. All in one place.
Is it possible to accomplish this? Maybe some control that I can use to view an entire webpage?