MVC :: 3 Beta And Virtual Directory With Different Auth Methods Not Working
Oct 17, 2010
when I upgraded my root website from ASP.NET MVC 3 Preview 1 to the new Beta 1. I am using RavenDB, which needs to run as a virtual sub-application with Windows authentication instead of Forms authentication. I had raven working like described above just fine in preview 1, but with beta 1, now it won't work. It looks like no matter what I try, the membership provider system for my root website is redirecting me back to the login page, even though I've set my RavenDB virtual directory to use windows authentication and cleared out the membership and roles providers in it's web.config. I guess MS changed something to do with
either routing or authentication between preview 1 and beta 1. If anyone else sees this problem and knows how to fix it, I would be in your debt. I would guess that the easiest way to recreate the problem would be to create a new ASP.NET MVC 3 Beta 1 root website, then add a virtual directory marked as an application. See if you can get the root site to use the forms auth provided by default, but have the virtual directory use windows auth, denying all users but a specific one of your choosing. I can't seem to get this scenario working in the beta like I did in the preview.
View 3 Replies
Similar Messages:
Jul 21, 2010
I have an asp.net mvc 2 app (using .net 4.0) that isn't routing correctly when hosted in a virtual directory. I have the following simple routing rule:
routes.MapRoute(
"Default", // Route name
"{action}", // URL with parameters
new { controller = "accounts" } // Parameter defaults
);
I'm trying to resolve [URL]. Where "accounts" is a virtual directory. If I put the app in the root of an IIS website it routes fine for [URL], but if I put the app in a virtual directory I get 404 errors. I've debugged and it is executing global.asax and configuring routing when in the vdir. Is there something special I need to do for routing in a virtual directory? FYI. I'm using a vdir because the root has wordpress in it. one more thing is that if I specify a default action in parameter defaults, it will execute the default action/controller, but it never matches anything else.
View 2 Replies
Mar 22, 2011
I have made a virtual directory in IIS 7.5 but still unable to catch the required path. I need to save uploaded files inside a folder which i created as virtual directory but still it is showing error like- "Could not find the path..
View 3 Replies
Aug 23, 2010
I have an ASP.NET web application(WebForms,Not MVC) developed in VS 2008 and i have implemented ASP.NET web forms URL routing by following this link [URL]It works pretty good when i run it on the Visual studion IDE.But does not works when i created a site under my IIS (IIS 5.1 in XP) and deployed the same files there.I have set ASP.NET version as 2.0 in the Properties window of my application too.But does not work.
View 1 Replies
Apr 20, 2010
In winserver-2008, IIS 7 and .net 3.5 (i have installed AjaxControlToolkit for framework 3.5 )when i create a virtual folder for this application on the server then Autocomplete Extender control is not returning any list nor any error message also.i dont understand how to debug because it is working fine in the localhost
View 2 Replies
Nov 9, 2010
How to give absolute path, that working with virtual directory and localhost
/Image/Icon.jpg - it is working well with localhost
/Image/Icon.jpg - It is not working on Virtual directory
I want absolute path solution which is working on both virtual and localhost directory
View 4 Replies
Nov 10, 2010
I have a WCF service in a virtual directory that is called in the code behind of a page that is in the parent directory, when i debug the code i can see the wcf service is being called, however when the service calls Membership.GetUser() it alway returns null. The user has already logged in to the asp.net site. When i call the service via jquery it does pick up the correct user, but i need to be able to call it via the code behind as well. I am developing in .Net 3.5 how i can make the Wcf pick up the logged in user?
View 3 Replies
Oct 27, 2010
I made a web form on a development website of mine (we'll call it dev.somewhere.com) and tried to publish it out to the web (we'll call it [URL]) in a subfolder. I named it default.aspx like I was supposed to and it worked flawlessly on the dev site. When I published it out the web, I wound up getting the following error when trying to get to the subfolder: [URL] Directory Listing Denied
This Virtual Directory does not allow contents to be listed. Confused and flustered, I tried to go to [URL], but I wound up with some error that won't tell me the problem. Instead it tells me to change the my web.config to read <customErrors mode="Off"/>.
View 1 Replies
Feb 13, 2010
As virutal directory points to physical path of the application, so if the IIS root directory is C:inetpubwwwroot and the application is stored at D:websites, than we need to create a virtual directory but if the application content is placed at C:inetpubwwwroot, then why still need to create virtual directory.
View 3 Replies
Feb 21, 2011
We're running IIS7 and have windows authentication enabled. Everything else is disabled. When we go to the page though, we aren't prompted for a windows logon, but are redirected to the default forms authentication login page (Accoun
View 1 Replies
Sep 26, 2010
if it is possible to use a WCF Dataservice as the MemberShipProvider for a forms auth application. I have written code for a provider (below), but I do not know what to do as far as a connection string, or any other web.config properties.
Please Help!!! Here is the code for my provider, anytime it says Odbc that is because I based this off of the custom Odbc provider on the msdn site. The only ACTUAL references to any odbc connection are in the comments:
[Code]....
View 1 Replies
Nov 18, 2010
I need this up and running quick but I spent the last few hours researching/worrying about which would be better:
Asp.net Forms Authentication
vs
Custom Header Token:
On the server
[code]...
View 1 Replies
Feb 23, 2011
Been scratching my head on this one today quite a bit. Time to ask the guru's.Implementing your basic Forms Auth for a 2.0 web app in conjunction with SQL Membership Provider and Role Provider. Web.Config from virtual directory root
[Code]....
All other subdirectories do not contain web.config files but rather wanted them to just work off inheritence from the root web.config. Upon publishing of this setup - I am having one hell of a time maintaining the user 'authenticated' state. (Not sure if that's the best explanation of what is going on.. but)
View 4 Replies
Jan 30, 2010
I'm using Request.ApplicationPath to learn the name of the Virtual Directory in which I'm running. Is there a more reliable way?
View 2 Replies
Oct 13, 2010
I set up a Virtual Directory called 'Site'. I browse to [URL].In the source file, the relative paths are coded as '/Page1.aspx', for example, and it has worked in the past.I'm using Win XP Pro SP3 and IIS 5.1. Any ideas on what might be causing this behavior?
View 3 Replies
Feb 10, 2010
How do you go about reading and writing to a virtual directory in iis 7?
View 2 Replies
Jan 13, 2010
I've below error message:
***********************************
Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. C:PdfViewerPdfTestSiteWeb.Config 28
***********************************
When I double click the error it goes to Web.Config file to tag:
<authentication
mode="Windows"/>
The application name in IIS is PdfViewer
View 2 Replies
Mar 1, 2010
My basic question is, can a virtual directory in IIS point to a physical path that's not on the local machine? For instance, right now I have a virtual path /NaturalGasReport/NYMEX which points to physical path C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX, but I want it to point to a physical path on a difference PC on the same network. Is this possible? (I know I can just try it out so I apologize for asking but I thought it would be best to get an explanation along with "yes" or "no"). If you want more detail, this is what I need to do. To make a long story short, because of a vendor product we are using that won't run on a 64-bit operating system, I have to run a program called Generate_NGReportData.vbs (it's a vbscript program) on a PC I will call 28. It uses a vendor product which produces jpg files which are graphs of the Natural Gas market. The machine where I wish it could run is called RTEST01 but this machine runs a 64-bit OS and the components won't work there. RTEST01 has the databases. So, I created a datasource on 28 which points to RTEST01's database. The vbs program will read the data, generate the reports, and write one row to a database table on RTEST01. RTEST01 has to run the complimentary program which sends these reports (via email). 28 is not an email server so it can't email the reports. So on RTEST01 I will run Send_NaturalGasReport.vbs. This program creates an email body of html. The html references [URL]NaturalGasReport/NYMEX/" & Day(nymex_update_dt) & ".jpg which is a virtual directory pointing to C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX. I need it to point to the folder and files on 28.So if my initial question has a simple yes answer then I am all set. If not, examine my architecture and propose an alternative solution.
View 10 Replies
Nov 2, 2010
First of all, I am trying to deploy a web application, without virtual directory. Yes...I have no other option but to try this due to some non-tehnical constraints.
Now, I have developed an ASP.NET 3.5 Web application, which works fine on my local ASP.NET Development Web Server. Then, I published the application to the actual webserver using the VS2008 Publish... option. When I got some error messages related to web.config, I removed the corresponding items from the web.config.
When I can access the page but the code inside the page doesn't really work. When I open the Default.aspx, which is directly under the website, I keep on getting this error:
Compiler Error Message: CS0246: The type or namespace name 'DynamicLoadControl' could not be found (are you missing a using directive or an assembly reference?)
This DynamicLoadControl is a class that I have developed and is present in App_CodeDynamicLoadControl.cs file (in the same namespace).
I have searched a lot and tried everything except creating a virtual directory. First of all, is it possible to have asp.net 3.5 website without virtual directory.
View 3 Replies
Jan 12, 2010
While creating virtual directory in IIS i am gettin "Failed to Access IIS metabase" problem can anybody help me regarding this issue
View 2 Replies
Jan 12, 2011
m new to .net framework 4 and iis 7.I created a webapplication in VS2010 with C#.I created the virtual directory for that web application in my IIS (IIS 7).when i tried to open the page by using virtual directory, it is displaying the following problem.Server Error in '/' Application.
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
Source File: E: estweb.config Line: 12 Show Additional Configuration Errors:
View 3 Replies
Apr 29, 2010
Assuming here that I have full control over the server.I'm looking for a sample code that would help me understand how to create a new virtual directory on the IIS pointing to say C:
View 4 Replies
Jun 3, 2010
I'm new to IIS, I just want to create a virtual directory in IIS. I'm using WINDOWS7.When I Browse my Default file it throws the folling Error,Error SummaryHTTP Error 500.19 - Internal Server ErrorThe requested page cannot be accessed because the related configuration data for the page is invalid.
View 8 Replies
Aug 5, 2010
Anybody know how to setup a virtual directory in IIS Express for things like Shared Resources? I can't figure out where to set it up in Web Matrix?
View 5 Replies
Dec 12, 2010
im a little bit angry, because i realy don't know how i can access a virtual directory a created in the IIS.
For example i created virtual directory called "Images" in the IIS under my default website. The "Images" folder is connected with my physical harddrive "D:Bilder".
Now how do i access this folder from code behind? I really tried everything but i can't load a image from this virtual directory :
View 5 Replies
