Assuming here that I have full control over the server.I'm looking for a sample code that would help me understand how to create a new virtual directory on the IIS pointing to say C:
View 4 RepliesAs virutal directory points to physical path of the application, so if the IIS root directory is C:inetpubwwwroot and the application is stored at D:websites, than we need to create a virtual directory but if the application content is placed at C:inetpubwwwroot, then why still need to create virtual directory.
View 3 RepliesI'm new to IIS, I just want to create a virtual directory in IIS. I'm using WINDOWS7.When I Browse my Default file it throws the folling Error,Error SummaryHTTP Error 500.19 - Internal Server ErrorThe requested page cannot be accessed because the related configuration data for the page is invalid.
View 8 RepliesI was running it directly from Visual studio which resulted in this error :) I can clearly see the images when I run it directly from IIS!
I've created a website under IIS and have successfuly pointed it to my project. The path to my project under IIS is:
[URL]
I, then created a virtual directory under website cartoon named cartoon_images but it creates it under localhost:36011/cartoon_images/ instead of localhost:36011/cartoon/cartoon_images/
As you can see, virtual directory is under the website "cartoon" but I can't access it as cartoon/cartoon_images/
I'll need to give links to this virtual folder but I can't do it in this case if I'm not mistaken.
I am working in a .net C# .In my application I have to create in theIIS>local computer>Web Sites>Default Web Site - virtual directory and also I want to be able tochange properties of this vitrual directory (All process of creation virtual directory in the IIS I want to do programmaticaly).
I had make a program in C# for create a Virtual Directory.But i didn't able to edit its property..
After this i have to implement all this program in .Net Remoting 0r WCF.
I would like to know the steps for creating a Virtual Directory for Webmatrix. I referred the post [URL] but could not understand how it can be done.
View 6 Repliesi am writing following code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
[Code]....
wen i m running this code its giving me "access id denied" exception..
I am able to create Virtual Directory on local machine, but I want to create it on a remote machine.
View 2 RepliesI am trying to Create Virtual Directory and develop the asp.net projects ..in IIS using NAnt script .
View 1 RepliesI am trying to get settle with my new dev environement and when I create a new web project and try to run it on IIS instead of the virtual server and use the create Virtual Directory button I get the following error message:
Unable to create the vitual directory. To aceess local Web sites, you must install the following IIS components:
IIS6 Metabase and IIS 6 Configuration Compatibility ASP.NET
In Addition, you must run Visual Studio in the context of an administrator account.
PS: I was running VS 2010 as an administrator when I got this error
how to create a asp.net mvc form helper that takes virtual directory into consideration? In testing our dev server has: [URL] production is: [URL] I need the form post url to reflect if we have a virtual directory or not, is this possible?
View 2 RepliesI have static content like html,css javascript stored in DB. when a user requests for these i create a temp file in virtual directory and return the url. My web app is hosted on a IIS server. On some systems on creation of a file my IIS Application pool crashes and restarts. If i disable file-monitoring though the problem is resolved, but i dont have this luxury when i am deplying at the client end. Is there any way by which i can avoid app pool crash during file creation? If not is there any way by which i can serve static content like html, css, images, xml and js without creating temp files. I would need a generalized way of handling all these data types.
View 1 RepliesI want to allow each user to create a webpage on our domain. example: www.site.com/username
I've created a few pages that get content from database and place it in a folder. I want each user to be able to edit their own data and when they hit "submit". the system will then copy those pages to a folder and modify the code so it read from the right database.
I keep getting "virtual directory not being configured as an application in IIS" errors. Is there any way around this error? I want the process to be 100% automatic so that I don't need to manually go into the server and configure the IIS myself.
I have a WCF service in a virtual directory that is called in the code behind of a page that is in the parent directory, when i debug the code i can see the wcf service is being called, however when the service calls Membership.GetUser() it alway returns null. The user has already logged in to the asp.net site. When i call the service via jquery it does pick up the correct user, but i need to be able to call it via the code behind as well. I am developing in .Net 3.5 how i can make the Wcf pick up the logged in user?
View 3 RepliesI made a web form on a development website of mine (we'll call it dev.somewhere.com) and tried to publish it out to the web (we'll call it [URL]) in a subfolder. I named it default.aspx like I was supposed to and it worked flawlessly on the dev site. When I published it out the web, I wound up getting the following error when trying to get to the subfolder: [URL] Directory Listing Denied
This Virtual Directory does not allow contents to be listed. Confused and flustered, I tried to go to [URL], but I wound up with some error that won't tell me the problem. Instead it tells me to change the my web.config to read <customErrors mode="Off"/>.
I have a asp.net website in the IIS which is available on internet as www.xyz.com now I have been asked to prepare another website which will be accessed via www.xyz.com/abc.
For this, do I need to create a virtual directory under the website folder XYZ in IIS? or is there any other way to achieve this.
I'm using Request.ApplicationPath to learn the name of the Virtual Directory in which I'm running. Is there a more reliable way?
View 2 RepliesI set up a Virtual Directory called 'Site'. I browse to [URL].In the source file, the relative paths are coded as '/Page1.aspx', for example, and it has worked in the past.I'm using Win XP Pro SP3 and IIS 5.1. Any ideas on what might be causing this behavior?
View 3 RepliesHow do you go about reading and writing to a virtual directory in iis 7?
View 2 RepliesI've below error message:
***********************************
Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. C:PdfViewerPdfTestSiteWeb.Config 28
***********************************
When I double click the error it goes to Web.Config file to tag:
<authentication
mode="Windows"/>
The application name in IIS is PdfViewer
My basic question is, can a virtual directory in IIS point to a physical path that's not on the local machine? For instance, right now I have a virtual path /NaturalGasReport/NYMEX which points to physical path C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX, but I want it to point to a physical path on a difference PC on the same network. Is this possible? (I know I can just try it out so I apologize for asking but I thought it would be best to get an explanation along with "yes" or "no"). If you want more detail, this is what I need to do. To make a long story short, because of a vendor product we are using that won't run on a 64-bit operating system, I have to run a program called Generate_NGReportData.vbs (it's a vbscript program) on a PC I will call 28. It uses a vendor product which produces jpg files which are graphs of the Natural Gas market. The machine where I wish it could run is called RTEST01 but this machine runs a 64-bit OS and the components won't work there. RTEST01 has the databases. So, I created a datasource on 28 which points to RTEST01's database. The vbs program will read the data, generate the reports, and write one row to a database table on RTEST01. RTEST01 has to run the complimentary program which sends these reports (via email). 28 is not an email server so it can't email the reports. So on RTEST01 I will run Send_NaturalGasReport.vbs. This program creates an email body of html. The html references [URL]NaturalGasReport/NYMEX/" & Day(nymex_update_dt) & ".jpg which is a virtual directory pointing to C:Program Files (x86)NymexSettleNATGAS_REPORTNYMEX. I need it to point to the folder and files on 28.So if my initial question has a simple yes answer then I am all set. If not, examine my architecture and propose an alternative solution.
View 10 RepliesFirst of all, I am trying to deploy a web application, without virtual directory. Yes...I have no other option but to try this due to some non-tehnical constraints.
Now, I have developed an ASP.NET 3.5 Web application, which works fine on my local ASP.NET Development Web Server. Then, I published the application to the actual webserver using the VS2008 Publish... option. When I got some error messages related to web.config, I removed the corresponding items from the web.config.
When I can access the page but the code inside the page doesn't really work. When I open the Default.aspx, which is directly under the website, I keep on getting this error:
Compiler Error Message: CS0246: The type or namespace name 'DynamicLoadControl' could not be found (are you missing a using directive or an assembly reference?)
This DynamicLoadControl is a class that I have developed and is present in App_CodeDynamicLoadControl.cs file (in the same namespace).
I have searched a lot and tried everything except creating a virtual directory. First of all, is it possible to have asp.net 3.5 website without virtual directory.
While creating virtual directory in IIS i am gettin "Failed to Access IIS metabase" problem can anybody help me regarding this issue
View 2 Repliesm new to .net framework 4 and iis 7.I created a webapplication in VS2010 with C#.I created the virtual directory for that web application in my IIS (IIS 7).when i tried to open the page by using virtual directory, it is displaying the following problem.Server Error in '/' Application.
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
Source File: E: estweb.config Line: 12 Show Additional Configuration Errors:
Anybody know how to setup a virtual directory in IIS Express for things like Shared Resources? I can't figure out where to set it up in Web Matrix?
View 5 Replies