I think normally the execution sequence is content page's controller first, then master page (I have some inline code).
But now I have a situation that master page's inline code is executed before content page's controller.
Is there a way of modifying the response in OnResultExecuted? Like reading the current response and writing it out again?
I want to replace date string in JsonResult after the object was serialized.
I have a controller's action and view page that uses a master page.
The master page has the html title section like:
<title>this is the page's title</html>
How can I access this section from within my controller's action (preferably) or my action's view page?
The WorldPay payment gateway suggests using this HTML to take the customer to the payment page:
<form action="https://select-test.wp3.rbsworldpay.com/wcc/purchase" name="BuyForm" method="POST">
<input type="hidden" name="instId" value="211616">
<input type="hidden" name="cartId" value="abc123">
<input type="hidden" name="currency" value="GBP">
<input type="hidden" name="amount" value="0">
<input type="hidden" name="desc" value="">
<input type="hidden" name="testMode" value="100">
<input type="submit" value="To Payment!">
</form>
How to I put this form on my page? The problem is I have a master page which wraps the content pages content in the ASP.net form, I can't nest the forms.
how can i add title and meta tags for content pages in a project base on master and content page(dinamically) ?
i used the blow method for master page :
[code]....
and the error is :(in line *)
Error 17 'System.Web.UI.MasterPage' does not contain a definition for 'SetMetaTags' and no extension method 'SetMetaTags' accepting a first argument of type 'System.Web.UI.MasterPage' could be found (are you missing a using directive or an assembly reference?)
I have a master page setup that is used throughout my site that is basically a header with a menu. I recently added a textbox and a button to this master page which is to be a quick search box that is available anywhere in the site. When a user enters text into the search box and hits the button, I need to load the actual content page which is used to search and show search results (which also uses this same master page), and have the text entered available so the search can be triggered automatically. Again, this search text box and button is now in my master page so it could be triggered from anywhere in the app... it serves as a convenient way to do a basic search from anywhere in my app, without having to first navigate to the actual 'search page' that already exists. You can also navigate to the actual search page, which uses the same master page, where there is many more search options.I'm thrown off by the master page arrangement, which I have not used until this project. What do I do?
View 4 RepliesI have an asp.net content page which is used inside of a master page (with header, menu and some links). I would like to reuse it in a different context without the master page (to not display the header and menu there), or with an empty master page if this is somehow possible. I don't want to violate DRY principle by taking the whole page and creating a standalone clone of it for obvious reasons. Is this somehow possible ?
View 2 RepliesI have over 300 content pages to create. Each has some standard styling. I would like to generate these pages, and was just wondering if there is a utility in web developer 2008 express to do so (otherwise I will just build one - but it would be great not having to do so!)
View 1 RepliesCan we use 2 master pages in a single content page without nesting master pages.
View 1 RepliesI have some of the methods in the master page,I want to inherit the master page to content page and use its methods...How will be able to do that..Do we have some techniques with inheritence?Please specify the techniques andPlease in C# with Code Behind...
View 4 RepliesCan any one tell me :- How many Master Pages can be there for a Single content page at max?Describe with details why is so also .
View 1 RepliesI have 2 nested master pages, lets call them MP1 and MP2. MP1 is top level, MP2 is level
2. Then I have several content pages. Lets say I have 2 content pages for now CP1 and CP2. Each content page has a form that will have some user input and a SaveData()function that saves the data to a database. Each content page also has a "Save" button that calls the SaveData() function.
MP1 and MP2 have several link buttons. The functionality I need is this: Any time a user clicks on a link button in MP1 or MP2, the SaveData() function of the currently loaded page should be called. This is to save the data even if the user forgets to click the "Save" button before leaving the page.
So far I can do this from the link buttons in MP2. I followed the master pages tutorial # 7
In the .cs file for MP2, I declare:
public event EventHandler SaveData;
then i raise a "SaveData" event any time a link button in MP2 is clicked.in every content page (CP1, CP2 etc.) aspx file, I have Master Type directive to assign the Master Page to MP2.
in CP1, CP2 etc .cs file, i have the following code:
protected void Page_PreInit(object sender, EventArgs e)
{
//wire up the SaveData event from MP2 to Master_SaveData function in this page.
Master.SaveData += new EventHandler(Master_SaveData);
}
private void Master_SaveData(object sender, EventArgs e)
{
//when the MP2 SaveData event is raised, save the data in this page.
SaveData();
}
All of this works fine.Problem is I am not able to do a similar thing from MP1.What I have tried so far is to raise an event in MP1 that is handled in MP2. When the event is handled in MP2, it raises the SaveData event to be handled in the page. The event in MP1 is null and hence never raised.
Today I got a strange problem,that is I am unable to access master page controls in its code behind,I am wonder because,I can able to access master page controls in their code behind of other projects/applications's master pages.
I know we can acess like this Label lblText = (Label)this.FindControl("lbluserName"); in that situation but I need to access div controls which are set to run at server.
I have a main master page, say MasterPageMain, and a couple of folders with couple of pages in each folder which act as a child page to that master page - MasterPageMain.
Now, I have about 10 pages in one of the folder which follows a certain pattern and they could really use a nested pages since any change on some parts needs me to change all the pages which is a pain really.
I already added a Nested master page, say NestedMasterPage - which is a child of MasterPageMain
I tried to change one of the page's <%@ Page directive to NestedMasterPage, immediately, there were a lot of errors. plus I dint know where the NestedMasterPage's children content would go.
What do I need to know in order to do this succesfully?
ps: I dint do this initially because I only had 2 pages, and I dint need this at that time, as the project grew, now i see that I should have changed it much earlier..
I have a ASP.NET content page where the master page is set dynamically. Both master pages contain a print button and an associated event handler for the click event of the button. Unfortunately I receive a run-time error when I attempt to dynamically access the event from the master page that was not initially assigned. Below are code snippets:
Page_Load():
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim strPageTitle As String = "Evaluator Data Form - Instructions"
If Page.MasterPageFile.Contains("masEvaluators.master") Then
Dim mp As Evaluators_masEvaluators = CType(Me.Master, Evaluators_masEvaluators)
[code]....
which produces the following error when I load the page and reference the "masStaff.master" master page:
System.InvalidCastException: Unable to cast object of type 'ASP.staff_masstaff_master' to type 'Evaluators_masEvaluators'. at Evaluators_EDF_Instructions.Page_Load....
I can solve the problem by adding a print button to the content page, but that defeats the purpose of using a master page.
how to declare global variable in master page and use it in all pages
View 1 Repliesi want to apply css on accordion control but since the page where i m using is already associated with master page...
when i go to my website page..i use attach style sheet and then ok..but style sheet doesn't get attach...how should i do that..?
I'm implement Comet in Asp.net MVC, I used timer to keep Async request in server, Async request will complete when timer elapsed 1 minute and response to client (to avoid 404 error) and then reconnect to Async Controller. I also wanna execute some Synchronous action during Async request was holding, but the problem is: When an Async action was executed and hold by using timer, the Sync Action wasn't called until Async action (comet long-live request) completed. I did test with firefox 3.6 many times, but the result is the same, so strange, Do you know why ? I have a sub some questions : To implement comet, using timer (response after some minutes elapsed) or thread (response after several time sleeping thread) to hold async request, which is better?
View 1 RepliesI want to show a panel with image at the body part of the master page with all other web pages..
View 1 RepliesHow can we add titles to each content pages which inherits from mater pages in asp.net?
View 1 RepliesI'm attempting to set a class on the body tag in my asp.net site which uses a master page and content web forms. I simply want to be able to do this by adding a bodycssclass property (see below) to the content web form page directive.
It works through the solution below but when i attempt to view Default.aspx the Content1 control loses its content.
Here is how I'm doing it. I have a master page with the following content:
[code]....
My requirement was to share master files among diff projects i read this doc [URL] so i use this technique to share msster pages among my diff projects in a soln but i dnt know how to reference such shared master page as if i use such
<%@ Page Language="C#" AutoEventWireup="true" MasterPageFile="../masterPages/masterInvGen.Master"
Is it possible with ASP.NET Master Pages to create content pages dynamically?That is, I know we can create content dynamically, but the content pages themselves,can those be created programmatically? I want to give my users the ability to define new content pages (i.e. Categories: Sofas, Tables, Lamps, and add/delete as they see fit) through a management panel. The resulting content pages should have proper URL naming, so that they index properly.An example: http://www.example.com/products/Lamps/contentpage.aspx.Is there a demonstration of this somewhere I can view?
View 4 RepliesI created this left side Navigation bar and I want to put it in Master page. when i clicked on the shared folder, it created the master page, but along with it gave a code behind file(.cs) file.
Earlier, i created the left Navigation bar in the controller and then I called the view from there. Below is my code. I was wondering if there is any way, I can do the same thing in my master Page. I am confused becuase of the master page code behind file.
My controller name is DataBindingToModel and the code works fine when it is in controller and I call the view from the controller.
[Code]....
and my view is like this
[Code]....
I just want to put this in Master page and I am not sure how to get the controller part done.
I have a nested master page. A parent master page, a child master page and a content page whose master page is the child master page. I have a reference to jQuery in the parent master page in the head section.<script type="text/javascript" src='<%#ResolveUrl("~/includes/jquery-1.4.2.min.js") %>' ></script> & Page.Header.DataBind(); in the OnLoad event.
I am using jQuery in all the pages including the master pages. However I am getting "Error: $().ready is not a function" in the content page. If I include jQuery reference in the content page it works. Question: If the reference to jQuery is in the master page head section, why aren't the content pages able to use jQuery? When I do view source, the script tag with jQuery is there and it works. The master pages and content page are merged during rendering and sent to the browser as a single html page so I am not sure when master pages are used, jQuery references break.
UPDATE:
When I changed '$.ready(function()' to 'jQuery(document).ready(function($)' it worked! I am not loading any other javascript libraries and I am not using MS Ajax.