MVC :: ValidatorMessageFor Not Displaying For Nested Collection?
Jun 29, 2010
I have a View with a model (Transcript) that has a collection of HighSchools and each high schools have a collection of grades.
I have a helper that generates a unique prefix to the id's of the controls when i create a new highschool and grades for those highschools dynamically.
The end result of the generated control names are something like HighSchool[0].Grades[random GUID].CourseName.
This works out well for everything except the ValidatorMessageFor. I can look at the modalstate error collection and see that those keys are exactly the same as the names of the inputs that they are validating so I guess my question is why aren't the validationmessages applying to the form fields with those names?
I do the same thing for highschools, generating and id of something like this - HighSchool[random GUID].Name and the validators work just fine.
[I should also mention that the validationsummary is displaying properly. Why would that display fine but not the validationmessagefor unless the field ids don't match what is in the model state dictionary but they do match! What is going on?]
View 6 Replies
Similar Messages:
Dec 15, 2010
I have an asp:Table which resides inside an asp:updatepanel. Most (but not all) asp:TableCell's are filled with buttons which all should be opening the same popupwindow though with different content (depending on the button that was clicked), and the popup itself has its own updatepanels, as the purpose of the popup-window is being an interactive form.My question is: (how) can I use a popupextender for more than 1 button, so that it works with async postbacks? setting the TargetControlID to the id of the button that was clicked will only happen -indeed-after clicking the button so a full page postback is already happening when setting it.Or should I create one popupextender for each button in my table which all point to the same asp:panel? the buttons are created runtime, then where do I go from there?Or am I still on the wrong track here?
View 3 Replies
Feb 1, 2010
i did like all instruction in this link
[URL]
but i have a problem,this erer arise "Can not find tabel1"
View 2 Replies
Jan 10, 2011
I have two listviews. The inner listview (InnerListView1) is in the SelecttItemTemplate of the outer listview (OuterListView1). Both listviews are bind in the code behind. The outer listview displays correctly in the ItemTemplate. Neither Listview Listview displays in the SelectItemTemplate. Both should display when I click the Select button. I just get a postback (flicker). The display should include the selected record of the outer listview and the inner listview.
Shown be low are code snipets of the.
Markup:
<asp:ListView ID="OuterListView1" DataKeyNames="entryid" runat="server" EnableViewState="False" EnableModelValidation="True" InsertItemPosition="LastItem" OnItemDataBound="OuterListView1_ItemDataBound" OnSelectedIndexChanging="OuterListView1_OnSelectedIndexChanging"
>
[Code]....
View 5 Replies
Aug 14, 2010
in my on-line shopping project i created a dynamic Category List (with Infinite Level Depth) Implemented in a Single Table in DB with Self join.the schema is like below:UpdateI want to use a JQuery plugin to make a Multi Level Menu bar. this plugin uses <ul> and <li> elements so I should transform the DB table to <ul> and <li>. the result should like this:
<ul>
<li>Clothing 1
<ul>
[code]...
View 2 Replies
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Jul 26, 2010
I have a list of objects that I want to bind to a gridview. Creating that list and binding it works fine for most of the public properties in that list.
There are some objects contained in each of those objects... for instance there is an Address object.
object.Address.Line1;
object.Address.Line2;
When I bind this to my gridview, I have no issues with stuff like object.DateRegistered, but how can I access things like object.Address.WhatEverProperty? I always get this error:
"A field or property with the name 'xxx.xxxx' was not found on the selected data source."
View 7 Replies
Mar 31, 2010
I want to know that how i use the collection class for storing some data and save it letter in the data base.
View 4 Replies
Mar 25, 2011
I have an ASP.NET app with lots of textboxes all over the page that need updating at various points through program execution.
These textboxes actually belong to a certain class, so for easy updating I thought I could create a Dictionary(Of string, object) and add the control.ID and the control to it and then for updating do something like this:
(in case of updating textbox.text):
[code]....
However the text property of the textbox does not actually get updated. I'm mainly trying to avoid having to manually do textbox.text = somestring for each one of my textboxes every time I have to update them.
View 3 Replies
Jan 4, 2010
I need to know the best way to do the following. I have nested business level APIs (say level 1 & level 2). L1 needs to call L2. Both APIs use the database layer directly at their own nesting levels.
Now, in the database layer, I fetch the db connection from the pool each time as follows:
SqlConnection conn = new SqlConnection(connString);
conn.Open();
Is it proper to fetch the db connection each time on every DB level call as above? I know it will return a connection from the ASP.NET connection pool. However, wouldn't it be better to maintain the same DB connection throughout the nested calls (or throughout the current http request lifetime)? Will fetching a connection from the pool each time cause issues with nested TransactionScopes?
View 1 Replies
Jun 17, 2010
Is there a better, cleaner way to do this in ASP.NET 2.0?
An ASP.NET 2.0 page displays a datalist of records. Each record can have many dates, so the dates are in a nested gridview (I chose a gridview over a datalist here because we want to be able to delete a date and this is easier done in a gridview). The parent record can never be deleted.
The display works fine: the nested gridview gets its datasource during the parent datalist's OnItemDataBound event.
The problem: the nested gridview's delete function. The date gets deleted without a problem (handled in the OnRowDeleting event), but somehow the redisplay is untying all the other nested gridviews from their datasources. The delete does not appear to cause a page postback, so I don't know how the other nested gridviews are losing their datasources.
View 3 Replies
Apr 1, 2011
I know that if I have set a cookie on a previous request, it will show up in my Request.Cookies collection. I want to update my existing Cookie. Are the cookies from my Request.Cookies collection already copied to my Response.Cookies collection? Do I need to add a new cookie with the same key using Response.Cookies.Add(), or do I need to use Response.Cookies.Set()?
View 1 Replies
Jun 20, 2010
I'm using HttpModule to capture requests to the web server. Before processing the page I'd like to check the values contained in some keys of the Request.Form collection and according to some logic change if necessary. I'd like to do this when BeginRequest event is fired. The problem is that the Request.Form collection is readonly.
View 4 Replies
Mar 1, 2011
I'm trying to create a nested gridview, but I'm stuck at the editing/deleting part of the nested gridview. (Below is my code).The nested gridviews are filling out nice, I've set the DeleteParameter in the SQLDataSource, but I'm still getting this error when trying to delete a criteria: 'The Gridview 'gvCriteria' fired event RowDeleting which wasn't handled.'I've tried to create a method 'gvCriteria_RowDeleting', but that didn't seem to work out.Someone who can give me a piece of advice? Would it be possible to fill the gridview without using gvDomain_rowDataBound? Dries
[Code]....
[Code]....
And the C# behind:
[Code]....
View 10 Replies
Feb 22, 2011
Objective:
Have the MultiView1 display only if Frieght values exceed 15.50. If check box is checked, retreive the row values of the Gridview1 and Gridview2 to perform a task.There will be two check boxes. One will be conditionally hidden. Each check box has a different function.
Example: Send an email notifying this entry has been flagged. I am using Visual Studio 2005 with ASP.NET 2 due to availability of resource. I have checked out numerous sites without finding the specific answer.
For example:
[URL]
The following a simplified representative example of what I am trying to accoumplish. It uses the Northwind.mdb access database with just the Customers and Orders table.
[Code]....
[Code]....
[Code]....
View 8 Replies
Feb 1, 2011
List<Dictionary <string,object>> I am reading about the list and collection, If possible, what are the different ways that I can utilize the list of dictionary collections..... gives me different examples or areas where I can use it.
View 3 Replies
Dec 5, 2013
In Nested Grid, we get a '+' sign. The problem is that '+' sign appears all times, even if there are no child records for that row. 1. Can we enable/disable OR Hide/Unhide '+' sign. depending on if child rows exits.2. OR alteast we can put some bgcolor indicating to user that this record do have child rows. Without any indicator user may feel quite annoying to click on '+' sign and nothing happens.
View 1 Replies
Jan 24, 2016
I have designed a collapsible nested gridview project using this article as a reference Collapsible Nested GridView with Paging using ASP.Net. I am trying to modify the code to collapse a gridview when another gridview is expanded so that only one nested gridview will be open at a time.
View 1 Replies
Mar 8, 2011
I have issues when developing under Visual Studio 2010 and getting the favicon.ico to display. I have used favicons in production sites (sites running on Windows Server 2008, for example) and have no issues. But when I try to get it to display when testing new code under Visual Studio 2010, then I have difficulties getting it to display. Then sometimes it will display just fine with no assistance (see next paragraph). Before anyone says it...Yes, I have a file in the root directory called "favicon.ico". No, it will not display (in certain projects) when the site is run under VS2010...UNLESS I TREAT THE URL IN THE BROWSER THE SAME AS WHEN RUNNING UNDER FIDDLER2. That is to say, it will only work if I add a period character (.) in the url after the "localhost" entry [URL]. This url will cause the favicon to display every time. If I leave out the period (.), then the favion will not display -- and Fiddler2 will also not display the activity when the page is displayed/refreshed. As I said, this is a sporadic issue. I have some projects where the favicon displays fine. Then I have others where it does not...unless I put the period in the url after the locahost word. Can someone explain to me why:
(a) The period is required in the url to get Fiddler2 to "catch" the activity;
(b) Why does this same phenomenon affect the favicon as well; and,
(C) Why do some projects display the favicon fine when run under VS2010 WITHOUT the period being added?
I just do not understand what the period character in the url string is actually causing to happen and why it doesn't happen when it's missing.
View 1 Replies
Apr 8, 2010
How to keep displaying report filters while displaying the report in CrystalReportViewer.I have a web part that which uses CrystalReportViewer to display the report data. I want to keep displaying the Report parameters (filters) as I rendered the report content.
View 1 Replies
Apr 21, 2010
ASP.Net Page layout is not displaying properly in QA machine but is displaying correctly in Dev Machine. What could be the issue? We are using ASP.Net 2.0
View 1 Replies
Jul 15, 2010
I would like to create a collection of key, value pairs in C# where the key is a property of an ASP.net control (e.g. ID) and the value is the value of that property. I would like to do this so I may later iterate through the collection and see if a given control has the properties in my collection (and the values of the properties in the control match the values defined in my collection). Any suggestions as to the best way to do this? Pseudo-code example:
Properties[] = new Properties[] {new Property(){name="ID",value="TestControl1"}, new Property(){name = "Text",value="Type text here"}}
private bool controlContainsProperties(Control control){
foreach(Property Property in Properties[])
{
if((control does not contain property) || (control property value != Property.Value))
return false;
}
return true;
}
View 2 Replies
Jan 21, 2010
I got this situation where I got a ICollection and I need to see if there is a object containing a title in it. If the title don't exist i can go ahead and shave the new object.
How can i do this? note i am already working with a for each loop on the titles..
[Code]....
View 2 Replies
Mar 28, 2011
I have a form that contains an asp:Menu control. One of the menu items is "Login" item. The way I want my application to work is when user gets to the main page, I want all the menuItems to be disabled except for the "Login" item which forces the user to login into the system. Once logged in, all the other Menu Items will become enabled.
My problem is, in my Master Page code-behind logic, I have a routine that disables all the menu items except the "Login" item. What I want to do is also change the backcolor property for each of the disabled menu items. Here is my code below:
Code:
Private Sub DisableMenu()
Try
[code]....
The Red highlighted lines of code will do what I want but it also changes the color of the "Login" menu item which I don't want.
View 3 Replies
Mar 7, 2011
mvc-ers in the Model i have a collection of Employees (EMPLOYEE_ID,
FIRST_NAME,
LAST_NAME,
MOBILE)
and i want to send particular fields from it to the view so in the Controller i write this code
[Code]....
how can i retrieve the collection in the view, should i create a class contains (e.EMPLOYEE_ID, Employee_Name)
and cast ViewData["Employees"] to it, or there is a trick?
View 4 Replies
