Obout.com ComboBox "Failed To Load Viewstate" Error?
Jan 9, 2011
I have just downloaded Obout.com suite controls for ASP.NET 3.5 and 4.0. I made this because I wanted a DropDown with images near items.It is working well, but, still in the examples, when you set AutoPostBack property to true, and you select an item from the ComboBox controls you get the following error:"Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request."
View 1 Replies
Similar Messages:
Jun 25, 2010
I read you can set matching keys in web.config files across a cluster.
But does it have to match across all the seperate apps on the cluster or is it in pairs?
IE... app1 on both clustered servers match or all apps on both servers have the same key?
View 2 Replies
May 23, 2010
I am writing a search results page for an airline booking system. I have Next/Previous buttons to view flights for the next or previous days. The way i have done my results grid is that i use an HtmlTable and dynamically add rows, cells and controls into the cells. This gives ultimate flexibility given that we can add any control type we want and have it function as it does everywhere else in the system. As you should be aware - i must recreate these controls each time the page is reloaded (in the page_init event) since asp does not handle this automatically.
When they go next/previous it refreshes the flight data and re-populates the grids. If they select a flight in the return grid (by checking the RadioButton), and go next on the FIRST leg grid, the selection of the return leg stays the same after the postback
- which is great. But the problem is, if the flight they selected on the return leg is no longer available it will not create the control and i get the following error;
"Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request."
Is there any way to tell asp.net that if you do not find the control anymore, simply ignore it rather than throwing the error? The nature of this design is that there potentioally WILL be a different layout after the page is posted back.
View 7 Replies
Mar 2, 2010
I'm developing a custom webcontrol from GridView.
I've run into this bizarre situation wherein I get the below error if I set page size other than 5 in the page using this control.
"Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request."
This GridView is a hierarchial type. I add a new GridView below each row in the webcontrol overriding OnRowDataBound.
If I set pagesize as 5 the paging works properly.
View 2 Replies
Apr 22, 2010
I have gridview control. visit [URL] but when i change page index of this i get error the following error
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
View 4 Replies
Oct 9, 2010
Now here is the weird thing. First i am running it locally on the built in vs2008 web server.I load my control in fine, do a postback from a linkbutton, locally on my machine it all works fine, no issue.However when it goes onto my host, it falls over with the message:
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request.Now i also load controls dynamically and use postbacks and things in the admin area of the site...and that works fine, however my front end just keeps failing? See the code behing below:
[Code]....
View 1 Replies
Apr 29, 2010
Yes, it's the infamous viewstate again! Now I am aware that problems can ocurr if you load controls in the wrong order or if the viewstate IDs are incorrect after postbacks etc etc. But my issue is that I am not really creating any controls dynamically - I only have one user control on the page.
More importantly, the issue seems to be occuring with just one user. What could be the problem? Corrupt browser cache?
ok - so I've narrowed it down a bit more. When I select an item from a drop down list control (which is a UserControl) - and then attempt to rebind my grid using the selected value, the error occurs.
The selectedvalue on postback seems to be zero every time (because the control is not in the viewstate somehow?!). The UserControl (containing the dropdownlist) is added at design-time.
[Code]....
View 2 Replies
Mar 16, 2011
My app is an ASP.NET 2.0 website. I use UpdatePanel to contain all UserControls. I also use ReportViewer control (local mode) for report function. When user click on "View Report" button, a javascript will be executed to open a new window which contains the ReportViewer control. Everything works well in my pc (Windows XP, IIS 5.1).
However, when I deploy the code to app server (Windows 2k3, IIS 6), I encounter a critical issue. After the report window is opened, whenever I click a button or change value of a DropDownList (UpdatePanel will be reloaded after these actions), an exception "Failed to load viewstate" is thrown.
I've tried to update the Report Viewer Redistributable 2005
(http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e7d661ba-dc95-4eb3-8916-3e31340ddc2c) in the server to SP1 (assembly version: 8.0.50727.817),
View 6 Replies
Jan 14, 2011
I have a sample page called Redirect.aspx with following content;
<body onload="document.forms.container.submit()">
<form id="container" runat="server" method="post" name="container">
<input type="hidden" value="<%=Request["APP_ID"]%>" name="APP_ID" />
</form>
</body>
the Page_Load method is following:
protected void Page_Load(object sender, EventArgs e)
{
container.Action = Configuration.Instance.PageToRedirect;
}
To this Redirect.aspx page, I'm directed from some external page. In the request context, I have APP_ID key, which is passed from this external page. Next, I want to pass this APP_ID value using POST to some other page, which is defined in the configuration. Unfortunately, I'm getting such error while redirecting:
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I don't want to disable view state validation (<pages enableViewStateMac="false">) because this is not the "solution" I want to apply.
Besides I don't understand why I'm getting such an error. Can someone get me through this ? Is there any other way to automatically submit a form on Page_Load event ?
View 2 Replies
Jul 14, 2011
I don't know what is causing this. The weird thing is, eventually, it goes away (as in, i get to see the web application form), BUT my web app does not work properly. I have image buttons that are not showing the image that I set at imageButton.ImageUrl. It works fine when I run it on my local machine (IIS), but when I try it on one of those free hosting sites, it will go as far as showing the interface (which has the image buttons), but when I click, it suppose to be set with an image.
btw, the first aspx page contains a ListView control, then after clicking on a button in that page, it goes to another page that contains a bunch of imagebuttons and an ajax timer control. I get the " Validation of viewstate MAC failed" error AFTER clicking on the button (in the ListView page).
View 2 Replies
Feb 15, 2011
I have simply created two aspx pages for testing purpose, Page1.aspx and Page2.aspx.
Page1.aspx code is as follows:
[Code]....
And Page2.aspx simply have this code:
[Code]....
Now,when i run Page1.aspx and press the button i am getting this error. Can anyone tell me why this error is occuring ?
ERROR:
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.Description: An unhandled exception occurred during the execution of the current web
request. review the stack trace for more information about the error and where it originated in the code.
View 10 Replies
Aug 19, 2010
have this error in server..
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
View 7 Replies
May 7, 2015
When i keep the .aspx page open or iden for long period on browser and then clicks on button after some time , it shows me the
error as "Validation of Viewstate MAC failed. Auto generate cannot be used in cluster."
how should i avoid this... ?
View 1 Replies
Aug 10, 2010
I am having a small problem with my links on the master page. I have inserted 5 link buttons on my masterpage. In every link, I have set the PostBackUrl to the corresponding page. In the link click event, I have also written the C# coding: Response.Redirect(). When I run the homepage (that is using the masterpage as a template) and click on one of the link, I get this error: Validation of viewstate MAC failed.....
What should I do to fix this error?
View 2 Replies
Dec 9, 2010
I have an application that works fine, problem rise when a page is waiting for the user response for more than 20 min and then user click a link on the form. The application response with the following error -
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I read a few articles regarding setting the Pages tag in web.config and set the Pages tag to the following -
[code]....
View 3 Replies
Feb 16, 2011
when i run my project i got bellow error...
"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."
View 1 Replies
Oct 21, 2010
I'm trying to figure out this error but I can't point out what's exactly causing this.Here is what's happening.User loggs in for a few hours and gets "Validation of viewstate MAC failed" Error after post back.I have set timeout in Web.config as follow.
<authentication mode="Forms">
<forms timeout="540" slidingExpiration="true" loginUrl="~/maintain/login.aspx" />
</authentication>
[code]...
View 6 Replies
Mar 8, 2011
I'm getting the old "Validation of viewstate MAC failed" error when I click the submit button on my form. (Seehttp://blogs.msdn.com/b/tom/archive/2008/03/14/validation-of-viewstate-mac-failed-error.aspx) The thing is I'm getting the error even when the page is completely loaded (it can be sitting there for five minutes before I hit submit but I still get the error). This isn't even a particularly lengthy page (which is one of the preconditions). It uses a DetailsView (which I understand is another precondition for this error), but it's the only databound control on the page. Also, whenever users get this error (which is 100% of the time when they click Submit), they lose their login authentication and have to log back in. This page/site has been in use for about six months but the error suddenly started a few weeks ago without any changes being made to the code.
View 2 Replies
Apr 28, 2010
I deploy a simple web app,that works fine on my local system, on a remote server. The webform consist of a Menu control and a Listview control. If I browse the page and then leave it for like 20 minutes untouched and then try to select an entry from the menu I am getting the following error -
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; AskTB5.6)
Timestamp: Wed, 28 Apr 2010 07:39:24 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500
Line: 4723
Char: 21
Code: 0
URI: http://www.shoeslocation.com/ScriptResource.axd?d=w3IpLZb6A3e5QHkk7kOTg4vdE8qw_8oIJ-6Kv5NpYYlCqyodfByoMbMvCI7RsUpH3U_p3tMqnuLd_nCq_qPaX4weg2w6s1FlfA_eQbVY-nU1&t=55414254
Before that I used to get the following error -
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.So I added the following to the Pages tag in the web.config validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never"
View 2 Replies
Jan 30, 2014
if my website when session of user expire i get the following error.
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
My website is in vs3.5
View 1 Replies
Dec 21, 2010
In my master.page I load a Web form:
<script type="text/jscript">$("#LoginInformation").load("LoginInformation.aspx");</script>
But when I have a ListView or DataView, etc... with a pager, I get problems when I click on 'next page'.Then I get the error: Validation of viewstate MAC failed. When I don't use Jquery's load function, I don't get an error.
View 6 Replies
May 9, 2010
I have a problem in my web site ...
When ever i left my website idle ...
The following message is displayed ...
After this message is displayed , no pages is able to access ....
The error message is :
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster
View 2 Replies
Jun 12, 2010
I have a FormView and a GridView connected to the same datasource inside of a MultiView where one view is for the grid and the other for the form. The GridView has selection enabled and when the user selects a record in the GridView I make sure that the same record is selected in the FormView.mv.ActiveViewIndex = vIndexForm; // causes the MultiView to change views from the grid to the form
fv.PageIndex = gv.SelectedIndex + (gv.PageIndex * gv.PageSize); // causes the FormView to use the same selected record as the GridView
This should cause a PageIndexChanged event (it doesn't), so I called by event handler explicitly. In the event handler I change the mode to FormViewMode.Edit. This should cause a ModeChanged event (again it doesn't), so again I called it explicitly.Finally in the ModeChanged event I get the DataItem for the FormView so that I can update some special fields that require some special formatting, however fv.DataItem is null which means I can't do any special formatting. At this point the FormView shows and the regular fields are fine. If I now hit the Cancel button the FormView fires the ChangedMode event at which point I changed the MultiView's ActiveViewIndex back to the view with the grid. The grid displayes just fine, but if I do a select of a row within the GridView again I get the "Failed to load viewstate" error.I can only assume that I'm either doing something in the wrong order or at the wrong time and it's tripping me up.
View 4 Replies
Apr 5, 2010
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
The above error occurs with gridview control , when used with template field columns with item template / and edit templates etc.
updating a row within gridview, at the time of loadiong it loads perfectly fined, but when tried to modify an existing row within gridview control, then it produces the error. Make sure the grid view control has to be a child control which manages the child table info with in a master form. to reproduce the above problem the grid view must be loading the child records info of a master within the masterform, meaning both master data and gridview data all to be managed in one single form.
I had to replace gridview control with datagrid and then it worked perfectly fine. I wasted almost 4 days of my time., there is no way we could figure out the problem. here is the full info of the problem.
Server Error in '/' Application.
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
Source Error:
[Code]....
Stack Trace:
[HttpException (0x80004005): Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.] System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +306 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Control.LoadChildViewStateByIndex(ArrayList childState) +134 System.Web.UI.Control.LoadViewStateRecursive(Object savedState) +221 System.Web.UI.Page.LoadAllState() +312 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1661
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
View 2 Replies
Apr 14, 2010
why i am getting an error when i try to run my reports from a windows server 2003 service pack 2 X64
the reportviewer displays but the following error shows up
Failed to load Database information
Error in file (temporary file that the viewer creates.
View 2 Replies
