Configuration :: Error Message After Page Is Idle For 10 Minutes / Validation Of Viewstate MAC Failed
May 9, 2010
I have a problem in my web site ...
When ever i left my website idle ...
The following message is displayed ...
After this message is displayed , no pages is able to access ....
The error message is :
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster
If you open a web page on one of the websites hosted on our server, and leave it for 20 minutes, and then submit a form, a "Validation of viewstate MAC failed." error occurs.
I have received an error "Validation of viewstate MAC failed".
I am hosting the web site on my own server, so there is nothing like a "Web Farm or cluster". Can you advise what could be the problem with this error.
I only get this error if the page is left inactive for more then 20 minutes and it throws the exception, so users have log-off and login to continue working fine.
if my website when session of user expire i get the following error.
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I have a page that have a combobox and a button, when the user select something from the combobox and hit the Go button they are redirected to the page with the desired variable.
[Code]....
The problem appears when the page was not used from more than 20 minutes and the user select something from the comboBox and hit Go Button the receive a page indicating the Error 404.The only thing that I try is to use a javascript code that Refresh the page every 15 minutes but is not nice to see a page refreshing without a reason.If someone can have a way to identify what can be done in this problem, Its going to be a huge help.
i have a webapplication hosted on web server. when i open page example login page , if i login after 2-3 mins or open any page after some time i face error, mentioned below. Server Error in '/' Application.Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. URL...
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.URL...
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
I don't know what is causing this. The weird thing is, eventually, it goes away (as in, i get to see the web application form), BUT my web app does not work properly. I have image buttons that are not showing the image that I set at imageButton.ImageUrl. It works fine when I run it on my local machine (IIS), but when I try it on one of those free hosting sites, it will go as far as showing the interface (which has the image buttons), but when I click, it suppose to be set with an image.
btw, the first aspx page contains a ListView control, then after clicking on a button in that page, it goes to another page that contains a bunch of imagebuttons and an ajax timer control. I get the " Validation of viewstate MAC failed" error AFTER clicking on the button (in the ListView page).
Validation of viewstate MAC failed. If this application is hosted by a Web Form or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. How to solve this problem in web.config ....
I have simply created two aspx pages for testing purpose, Page1.aspx and Page2.aspx.
Page1.aspx code is as follows:
[Code]....
And Page2.aspx simply have this code:
[Code]....
Now,when i run Page1.aspx and press the button i am getting this error. Can anyone tell me why this error is occuring ?
ERROR:
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
I am having a small problem with my links on the master page. I have inserted 5 link buttons on my masterpage. In every link, I have set the PostBackUrl to the corresponding page. In the link click event, I have also written the C# coding: Response.Redirect(). When I run the homepage (that is using the masterpage as a template) and click on one of the link, I get this error: Validation of viewstate MAC failed.....
I have an application that works fine, problem rise when a page is waiting for the user response for more than 20 min and then user click a link on the form. The application response with the following error -
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I read a few articles regarding setting the Pages tag in web.config and set the Pages tag to the following -
"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."
I'm trying to figure out this error but I can't point out what's exactly causing this.Here is what's happening.User loggs in for a few hours and gets "Validation of viewstate MAC failed" Error after post back.I have set timeout in Web.config as follow.
I deploy a simple web app,that works fine on my local system, on a remote server. The webform consist of a Menu control and a Listview control. If I browse the page and then leave it for like 20 minutes untouched and then try to select an entry from the menu I am getting the following error -
Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; AskTB5.6) Timestamp: Wed, 28 Apr 2010 07:39:24 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500 Line: 4723 Char: 21 Code: 0 URI: http://www.shoeslocation.com/ScriptResource.axd?d=w3IpLZb6A3e5QHkk7kOTg4vdE8qw_8oIJ-6Kv5NpYYlCqyodfByoMbMvCI7RsUpH3U_p3tMqnuLd_nCq_qPaX4weg2w6s1FlfA_eQbVY-nU1&t=55414254
Before that I used to get the following error -
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.So I added the following to the Pages tag in the web.config validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never"
To this Redirect.aspx page, I'm directed from some external page. In the request context, I have APP_ID key, which is passed from this external page. Next, I want to pass this APP_ID value using POST to some other page, which is defined in the configuration. Unfortunately, I'm getting such error while redirecting:
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
I don't want to disable view state validation (<pages enableViewStateMac="false">) because this is not the "solution" I want to apply.
Besides I don't understand why I'm getting such an error. Can someone get me through this ? Is there any other way to automatically submit a form on Page_Load event ?
I am using windows 7, my application is working fine in visual studio but when i host it and browse it through my browser getting the following error. Sometime back it worked fine but recently it started giving this error. Server Error in '/InfraICHR' Application. Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC2000: compiler initialization
i have these message in only one user of my web ASP.NET application.
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey & validation algorithm. AutoGenerate cannot be used in a cluster.
After changing the Master Page in ASP.NET MVC 1.0 application, I keep getting this familiar error when I try a postback without filling in the mandatory form elements which are validated by the server:
"Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster."
The new page refers to a lot of jQuery code with lightboxes, superfish etc. Could that be a problem while doing a postback?
If I revert back to the original master, the error disappears and I'm able to validate form fields. Both masters are located in the same path.
After a little debugging, I've realized that a directive in the master page:
<% Html.RenderAction("menu", "nav"); %>
is creating the problem. The directive asks the "menu" action of the controller "nav" to inject a partial view Menu.ascx. If I delete this line from the new master page, everything works OK. My app's left bar navigation relies on this directive to work properly. Is there any way I can get around this?
I am trying a MVC 2 application on my computer's IIS and when I go to a page that contains a form I get the following error:
-----------------------
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. ------------------------------
What is strange is that on the begining the form is ok but after a while I started to get this error.And why at the start everything was ok and after a while I started to get this error?
I have gridview control. visit [URL] but when i change page index of this i get error the following error
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
