I have a parameter Owner with 1,2,3 options in dropdown.
On selection of option 1 , a country parameter should be enabled with all countries' values defaulted.
Option 2 should enable Region parameter with all the Regions values selected and country parameter should be displayed.
Option 3 should disable both Region & Country Parameter.
I am using SSRS 2005 with Enesys tool as add on.
I've a MDX Query that has where clause as shown below.I'm designing report using SSRS 2008. How can i pass date as parameter? I tried to setup @from and @to as parameter but not working?
WHERE ( {[Date Central].[Calendar Date].[2010-04-01 00:00:00]:[Date Central].[Calendar Date].[2010-08-30 00:00:00]} )
need it to work as
WHERE ( {[Date Central].[Calendar Date].[@From]:[Date Central].[Calendar Date].[@To]} )
I have a pop up window which contains a listbox. The items on the listbox should be filtered when it is opened based on the other parameters on the parent page. I am using session to pass the values from a page to another.
View 4 RepliesIs it possible to change a parameter's property after the uer has made a selection or filled in another parameter field? I'm using VS2005
Case:
- 3 parameter fields; Country,Station,Carrier all three are textfields and are allowed to stay 'blank'.
- When the user enters a Country-code in the 'Country' parameter field, the 'Carrier' parameter should become a required field.
I did some searching on the net, but haven't found the solution. I started to wonder if it's actually possible?
One of our customers has a report with a single value string parameter that has over 1000+ possible values. selecting single value from 1000+ choices results in bad UI, among other things.create another parameter that acts a filter for the other parameter. So you would have Param1 with say 25 choices and selecting a choice would narrow down the option for the second parameter.Is this the best way. What is the best practice for handling these kinds of parameters?
View 5 RepliesI currently have this working somewhat as follows aspRadioButtonList ID="leavingCert" CssClass="radio pc2 top8" RepeatDirection="Horizontal" runat="server" AutoPostBack="True" OnSelectedIndexChanged="includeDaft_CheckedChanged">"But the problem is this refreshes the page is it this possible without refreshing the page
View 1 RepliesI have a paramater Country Which have options to select 10 different countries.. i am using 10 tablix one for each country .... When i select a country , only one tablix Gets visible and the other 9 tablix gets invisible.. The problem is that all the invisible tablix are calling sp that is dataset ... Cause it is reducing the performance of the report......how can i assign empty dataset to the tablix or conditionally change the dataset for the tablix based on a parameter...
View 2 RepliesHo to loop and list all parameter in the rdl report
View 1 RepliesIm facing problem in one of the reports while passing multivalue parameter from ssrs to SP.
please note that in cases suppose there are single word in multivalue paramtere then its works corretly,in that scenario i have made one function see below:-
[Code]....
and did changes in sp as follow :-
[Code]....
im using ssrs2005.
I looked all over the forums, spent about a day on it, found numerous people having similar problems passing a parameter, but all the solutions I found so far were partially incomplete or incompatible to my project. I tried using a few of the "solutions" and they generated exceptions. I'm using straight ASP.NET so far with no c#. Is there a way to do it without code behind? I'm certain that if you provide a complete working example that others in the future will be very grateful as well. Here is what I have thus far:
I used studio to create an .ASPX web form, and I used the report wizard to create a .RLDC file on the .ASPX page. When I execute it, it works! Beautiful... Now how do I pass it a parameter? So this is what I have below (which works), but I want to pass in a single int32 parameter to the stored procedure usprptGetData in which it is based.
[Code]....
I tried adding this code below and it generates exceptions:
[Code]....
I m using SQl server 2005 reporting..I have used two datasets for a report.
In one dataset i m passing a parameter and i want to pass that parameter to another dataset.So that i dnt need two paramerters when i preview the report.
But it requires both the parameter......
I have a form which sends over a query string to a rdlc report. The data comes up perfectly but what I need is the ability to show that parameter data in a text box on the report. Primarily I am wanting to show the start and end date parameter values on the report.
View 3 RepliesI've a user table, and contact table linked to it, and appointments where contact are linked to it with users in this in it. need a report which show ...by user number of contact created by this user and number of appointment createdo i guess i need two datasets but how can I pass parameters between them to know what is the current user id ..?
View 1 RepliesI have only just started to use Reporting Servcies and would like to know is there any way of putting IF statments into the SQL statment depending on the value of a selected parameter.
[Code]....
What I would like to do is when "Parameter!RP_Area.value" = 99 then miss that part of the sql statment out, something like this.
[Code]....
if this is possible and if it is how would I go about doing it?
I have created an ASP.NET page and included a ReportViewer on the page.
I have created a report with a parameter for an item ID for a row from the database.
After generating a multivalue parameter, I send it to the report, but only the first item in the list is displaying.
In my included code, I am using a FOR loop to generate a list of ID's I want to print a detail for (one detail per page), but eventually I am going to allow a user to select the ID's from a GridView, generate the reports and then print.
Here is the parameter definition from the report:
<ReportParameters>
<ReportParameter Name="ParmWorkOrderID">
<DataType>Integer</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Report_Parameter_0</Prompt>
<MultiValue>true</MultiValue>
<Hidden>true</Hidden>
</ReportParameter>
</ReportParameters>
---------
Here is the code that build the multivalue parameter:
List<ReportParameter> paramList = new List<ReportParameter>();
ReportParameter param = new ReportParameter("ParmWorkOrderID");
// Create the ArrayList of values to pass
ArrayList values = new ArrayList();
for (int i = 19; i < 50; i++)
{
param.Values.Add(i.ToString());
}
// Add the parameter to the list of ReportParameters
paramList.Add(param);
// Set the reports parameters
this.ReportViewer1.LocalReport.SetParameters(new ReportParameter[] {param});
-------------------------------------------
Finally, here is the filter I have on the report:
<Filters>
<Filter>
<FilterExpression>=Fields!WorkOrderID.Value.ToString</FilterExpression>
<Operator>In</Operator>
<FilterValues>
<FilterValue>Parameters!ParmWorkOrderID.Value</FilterValue>
</FilterValues>
</Filter>
</Filters>
So, why won't the reporting engine pump out one page or row (if I use a table on the report) for each of the ID's sent over as parameters?
my qyery is Select * from UserTable .
i set my parameter as @UserId,checked multivalue check box.
in Available values-from query-i set my value and label field.
default value is null.
when i click the preview tab,multiple UserId with check box appear in drop down list...
when i select any one userid ..i get the result for all the userid list instead i want only the selected userid's information...
Can i set dates [From date and To date] as parameter in my RDLC report. Report generating using sql datasource .. But i want to pass dates as a parameters.
View 1 RepliesI'm having a very difficult time figuring out how to pass in a parameter to my rdlc report.
1) On the report, I went into Report > Report Parameters and added a parameter.
2) I tried writing some code (vb) on the page_load event to pass information to this parameter. I have the following:
[Code]....
When I run the report, I receive the following error: "The 'MuniID' parameter is missing a value"
Am I on the right track? give me some direction on what else needs to be done?
How to set report parameter value from the UI page to My Report.
I can able to launch the report list in my ui page. I can open the reports which are there in my report server. I am generating Report by clicking the button am storing report server URl in string & Redirecting that URL by clicking button in below way,
strcompleteUrl = "My ReportServer Name" + Server.UrlEncode(strFolder) +"/"+ "Availble+files" + "&" + strcompleteUrl + "rs:Format=PDF" ;
Response.Redirect(strcompleteUrl);
When I am launching the report from UI page I need to pass report parameter value .. I am generating my report based on Fileyear.
How to pass the fileyear to my report url. ??
My report parameter values are coming from my stored proc. How to assign that stored proc value to my CompleteURL.
I'm using ReportViewer in Asp.net 2.0 to view a SSRS report. I need the value of the selected parameter to use in a vb query. The parameters are populated on the server and its a single selection. Doing searches I've come across ReportViewer1.ServerReport.GetParameters() but I can't figure out if I can use this to determine which value the user has selected in the parameter dropdownlist.
View 2 Replieshow to insert radio button selection into sql server database using parameter.
View 3 RepliesWhen i try to pass this string "- !@#$%^&*()_+|}{:"?><<>?/.,';[]`" as a parameter to SQL Server Reporting it crashes. Here is code sample
ReportParameter[] ReportParams = new ReportParameter[1] { new ReportParameter("Name", HERE-COMES-SPECIALSTRING)
IS there any way to pass special character safely like in SP's we use @ sign for parameter name
I am creating a report using sql reporting services (.rdlc) in asp.net web application. I am displaying master records using List because I need to display one record in one page. In each page now I want to display the child records in a table inside the same List control.
For example: In mater records there will be Department Name, Department Location, Department Zip. In child records there will be Employee Name, Employee Id, Employee Salary, Employee Start Date. There is a link between Dapartment and Employee table by Department Id. I want to display one department record in one page and the all employee of that department in same page in a table. And next page of the report will have other department record and respective employees in a table.
I am being able to display Department records in each page but not being able to display Employees records in a table for particular Department Id. For this I used List control.
I am having two tables in a database linked each other by means of primary and foreign key. In my report I'm having parameters but itzz not workin.
When I use just two tables I can able to view my report, when I deploy parameter in my report it didnt affect my report in any form it showing normal report without parameter. How to pass parameter in it.
Can we do Cascading parameter without having dataset.
In the report parameters for SSRS 2005
I am have two columns
one column second column
two wheeler cycle
scooter
herohonda
three wheeler Auto
four wheeler car
sumo
Jeep