SQL Reporting :: Reportviewer Sorting Fails In Successive Post Backs?
Jan 19, 2010
I have created a rdlc file (Binded its columns accordingly, sorting is enabled on few columns) and rendering it using a reportviewer control. Everything works fine while loading report first time; it shows the progress indicator & loads it correctly. When I click on sort_button(default shown by control itself) it sorts correctly. Now successive clicks on sort_button shows error :
An error occurred during local report processing. An internal error occurred on the report server. See the error log for more details. Gone through the log at server:
Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__01_19_2010_01_34_05.log but not able to deduce any fruitful exception.
Trace value in config file is set to :< add value="3" />
Either disable the sort_button till the report loads completely. Or show the progressbar indicator till the report loads completely.I am not able to find out the solution for: how to achieve any of the two ways mentioned above.
I am retrieving results from a SQL database based on a user file upload, and I am saving the returned results in a datatable. It can be up to 15,000 rows. I need to use this datatable in other requests in this same page - i.e. saving the data back to another table, exporting to a file....How can I store the datatable to access again? I read up on viewstate, session , and cache, but they all seem to have an affect on performance and memory.
I have a situation where I want a user to select a file, then select an option from a DropDownList. When they select an item from the DropDownList I do an auto post back and do some stuff with the file, but this causes the path to clear out. Is there some way that I can keep the path from clearing out?
I have recently started learning ASP.NET with MVC 2 Framework, I am facing difficulties in the following scenarios.In my MVC application I want to retain partial information in Model over post backs.Following is my scenario,
1. I initiate "Edit" of main record by clicking date hyperlink from left navigation.
2. Amend some data.
3. Save the record.
4. "Edit" sub record of the saved record by clicking another hyperlink from bottom left navigation panel.
The page is divided in to 6 tabs, the first 5 tabs shows the data for the main record and the 6th tab shows data of sub record. Wehn we "Edit@ sub record the previous 5 tabs doesn't have any changes noted, that means there is no harm in keeping their details intact in the main model. So is there a way to access model in the controller on hyper link click action so that I can only load the data for the clicked sub record (I am asking this, because the hyperlink click uses HTTP GET method so no model parameter passed in action method). If no, then how do I retain partial values in the Model over post backs?
Note that each tab data have been kept in individual models, and a main model has a collection member to hold all these individual models together.I thought as the model is binded with the view, it is too binded with controller. But it is allowing easily to access model in variable "Model" for the view but not for the controller.
Can any one let me know "How to load the dynamcially added HTML Controls(Controls added using javascript) during the postbacks without loosing their values?
I am using Microsoft SQL server 2008 reporting service to generate PDF reports for my application.All was working fine, until I start to get the following error. I came to know after some google that this is because of some JPG images having metadata. If I have png image then its fine, but for me to convert these jpg to png is not an option, since all I have available is JPG.I installed service pack 1 as well, but its same. I have following SQL server installed.
"Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (X64) Mar 29 2009 10:11:52 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)"
I found few solutions like mentioned here http://support.microsoft.com/kb/967618 But thats for 2005. Surprisingly, already solved error for 2005 coming for 2008.
Non-negative number required. Parameter name: value Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentOutOfRangeException: Non-negative number required. Parameter name: value
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I want to do ReportViewer, and i want have created a DataSet. I fail to drag the data table from ToolBox. My ToolBox doesn't exist any data table. The output i want to archive is something like this in my DataSet
For many of the pages I build, I don't wish to have the ReportViewer visible until firing an event such as a button click. Using .Net 4.0 and ReportViewer10, however, throws the error "Message: Sys.ArgumentNullException: Value cannot be null. Parameter name: panelsCreated[1]" if you try to keep a panel containing the ReportViewer hidden until after a button click.Since I couldn't find much about this topic online, I'd basically been working around this for some time until I figured out today that if you reset the ReportViewer ReportPath in the code behind in the button click (even if it's the same path as in the aspx page), you can successfully keep the ReportViewer hidden until the button click.
I have created many reports in my ASP.Net 3.5 app's and using VB Code-behind. I have the following code that will take the report from the reportviewer and on a click of a button, export it to PDF. So now, I can hide the reportviewer and just have the button click events generate my PDF's. I do not know how to tweak this code to enable me to print directly from another button's click event without the reportviewer being visible.
[Code]....
What I am looking for is how to fill the tableadapter that I am using in the .xsd dataset file to the I do not have to incorporate reportviewers anymore?I know my code above would need to be adjusted so that its not looking at ReportViewer1 for the Report/Data... But I do not know how to do this.
I have a ReportViewer control on an ASP.Net page and an RDLC set up that uses a TableAdapter that pulls one record. This works fine.I'd like to have the *same* RDLC use a different TableAdapter (schema of table is the exact same, but may have multiple records). I've tried putting two DataSets in my RDLC and having the code dynamically select which one to use, but it's not working quite right for me.
i am able to bind ds to GridView. So can i also bind ds to reportViewer???I have search online and mostly require to add new DataSet(right-click project ->add new item->DataSet ) and Report(right-click project ->add new item->Report) to bulid the report.Is there a way for me to bind ds to reportViewer like i bind ds to GridView??
i am using asp.net 2.00(visual studio 2005 std edition) i have designed a report in reportviewer which runs fine on localhost server but when deployed on server it shows no data from other computers , after searching net i found that dynamic binding of dataset and reportviewer is required , so i entered following codes (dtgraph is data table name and graph.axd is data set name ) the code gives error that dtgraph is not declared , where i should declare it / any solution
ReportViewer1.Visible = Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.LoadTrue ReportViewer1.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Local rep.Refresh() rep.ReportPath = Dim rep As Microsoft.Reporting.WebForms.LocalReport = ReportViewer1.LocalReportDim rds As Microsoft.Reporting.WebForms.ReportDataSource = New Microsoft.Reporting.WebForms.ReportDataSource()"graph.rdlc" rds.Name = "graph_dtgraph" rds.Value = dtgraph.tables[0] End End Sub Class
I have a reportviewer that uses a dynamically generated RDLC (which means the RDLC is created at run-time through an XSL) to generate reports. I have no issue loading the report. My problem is with its toolbar. It is always disabled. I can't perform search, change the report size, or export the report to another file format.
I am new to this sql reporting service. But anyhow by surfing I am able to bind the report but i was stuck in image display.Anyways, i also managed that. But the real problem is whenever i was keeping a image control in rdlc report i was having session prob. If i remove the image control then as usual report works fine.either for session problem or for image display. I am keeping the image name in database but for binding the rdlc report i am using a store procedure which return the path (static) concating with the image name(kept in database).
I am using Visual Studio 2005 and Report Viewer to generate a few reports that I extract from a MS SQL 2005 DB. Everything is working fine, but I want to be able to pass 2 parameters from my ASP.NET C# file to the report file (.rdlc) and show it on the generated report.
My C# file has these lines, which I believe pass the parameters off
i have installed sql server 2008 with reporting service and visual studio 2008 and business intelligence when i create a new project asp.net web site, i need to use some report, so i add the control reportivewer in my page and in the property windows when i have to set the destination report, i am unable to set it, in the dropdown list does not compares nothinghow can i do?
i want to use reportviewer web control in my web site,so add assembleis in my bin root(Microsoft.ReportViewer.Common.dll,Microsoft.ReportViewer.WebForms.dll,Microsoft.ReportingServices.ProcessingObjectModel.dll)
and add xml tags in my web.config,in localhost all thing is right but when in upload web on my server and want to view reports i have this error:System.Security.SecurityException: That assembly does not allow partially trusted callers.
I set trust level in web.config to "full",medium,high and etc but my problem didnt solve.