i am able to bind ds to GridView. So can i also bind ds to reportViewer???I have search online and mostly require to add new DataSet(right-click project ->add new item->DataSet ) and Report(right-click project ->add new item->Report) to bulid the report.Is there a way for me to bind ds to reportViewer like i bind ds to GridView??
[Code]....
The following results in this error msg "A data soruce instance has not been supplie d for the data source 'StockStatusRow'
[Code]....
i am using asp.net 2.00(visual studio 2005 std edition) i have designed a report in reportviewer which runs fine on localhost server but when deployed on server it shows no data from other computers , after searching net i found that dynamic binding of dataset and reportviewer is required , so i entered following codes (dtgraph is data table name and graph.axd is data set name ) the code gives error that dtgraph is not declared , where i should declare it / any solution
ReportViewer1.Visible =
Protected Sub Page_Load(ByVal sender
As Object,
ByVal e As System.EventArgs)
Handles Me.LoadTrue
ReportViewer1.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Local
rep.Refresh()
rep.ReportPath =
Dim rep As Microsoft.Reporting.WebForms.LocalReport = ReportViewer1.LocalReportDim
rds As Microsoft.Reporting.WebForms.ReportDataSource =
New Microsoft.Reporting.WebForms.ReportDataSource()"graph.rdlc"
rds.Name =
"graph_dtgraph"
rds.Value = dtgraph.tables[0]
End
End Sub
Class
i create a dataset on the form load which contain the reportviewer, i'm doing like this but it did not work : ....
View 1 RepliesI am using asp .net 4.0 report viewer...how is bind rdlc dynamically using stored procedure..send me some useful links r some example using stored procedure.in asp .net4.0 .
View 3 RepliesI am trying to run a report in local mode and bind it at runtime to a simple List<string>; I have searched for a sample with no success so far, so could anyone give some hints? I know that a ReportDataSource can be a type that implements IEnumerable but I cannot figure out what field name should be used in the rdlc file? Suppose I bind the datasource at runtme (something like ReportViewer1.LocalReport.DataSources(Add new ReportDataSource("dsname", new List<string> { "John Smith", "Jane Smith" }))
can I still define my report definition file at design time, and bind a text box control to something like Fields[0] or the like? And on a different note, I also defined a static method without parameters that returns a generic list of some type; Yet if a go to Report - Data Sources menu option, I cannot see the method in the list of Project Data Sources.
i am trying to call a report with a ReportViewer control using this code:
[Code]....
but i am having this error
Microsoft.Reporting.WebForms.MissingReportSourceException = the source of the report definition has not been specified.
I have a ReportViewer control on an ASP.Net page and an RDLC set up that uses a TableAdapter that pulls one record. This works fine.I'd like to have the *same* RDLC use a different TableAdapter (schema of table is the exact same, but may have multiple records). I've tried putting two DataSets in my RDLC and having the code dynamically select which one to use, but it's not working quite right for me.
View 1 RepliesI have a datagrid called studentAddList which is combined by 2 tables. Now I have a reportviewer called ReportViewer1. They are both placed on the same page. Now I would like to bind the datagrid studentAddList to the reportviewer ReportViewer1. The reason why I bind the datagrid to it is because I have some filtration on the data.
View 5 RepliesI have a reportViewer control and I dynamically setting the report path and dataset in the page load event if it is not a post back. This first report displays without issue. However, when I attempt to change the report path / dataset via the onChange event from a dropdown list I get the following error:
A data source instance has not been supplied for the data source "Summary_DataTable1".
This code works fine and the summary report is displayed the first time the page is loaded.
[code]....
I have a data object where one of the properties is a collection of another data object. I never really figured out how to map this to a GridView, but I came up with a workaround. Now I am stuck and cannot figure out any way to do this in a ReportViewer.
Here is how I solved the GridView issue:
Say we have these objects:
public class BoysWithToys : List<BoyWithToy>
{
}
public class BoyWithToy
{
string FirstName { get; set; }
string LastName { get; set; }
int BoyNumber { get; set; }
List<Toy> FavoriteToys { get; set; }
}
public class Toy
{
int BoyNumber { get; set; }
string Toy { get; set; }
}
What I wanted to do was to map BoysWithToys to the GridView and present one GridView row per BoyWithToy record. Where there was more than one FavoriteToys record I wanted to list them in a bulleted list in the FavoriteToys column. I accomplished this by calling RowDataBound() for the GridView, casting the e.Row.DataItem to BoyWithToy, then looping through all of the FavoriteToys and adding each Toy to a bulleted list, then setting the column's text to that list.
I have no idea how to accomplish anything similar in ReportViewer. If I simply drag the BoysWithToys DataSource to the designer and run it, the FavoriteToys column shows '#Error'.
I want to do ReportViewer, and i want have created a DataSet. I fail to drag the data table from ToolBox. My ToolBox doesn't exist any data table. The output i want to archive is something like this in my DataSet
View 5 RepliesI have upgraded web application from VS.2008 to vs 2010. I was using previously ReportViewer 2008 control in a page and replaced with 2010 ReportViewer Control.
I have installed the ReportViewer Redistributable also in my local pc as well as in the server. Also as per the new requirement I have placed the Scriptmanager in the web page where the reportviewer control located.
While running the page, the reportviewer run the report and is not showing the data on the screen. It shows the blank screen. But If I export the data to execl or world it is showing the data. Also the page numbers in the reportviewer showing the total pages available in the navigation bar. I am sure the report is running and bringing the data to the screen but not showing it.
For many of the pages I build, I don't wish to have the ReportViewer visible until firing an event such as a button click. Using .Net 4.0 and ReportViewer10, however, throws the error "Message: Sys.ArgumentNullException: Value cannot be null. Parameter name: panelsCreated[1]" if you try to keep a panel containing the ReportViewer hidden until after a button click.Since I couldn't find much about this topic online, I'd basically been working around this for some time until I figured out today that if you reset the ReportViewer ReportPath in the code behind in the button click (even if it's the same path as in the aspx page), you can successfully keep the ReportViewer hidden until the button click.
View 1 RepliesI have created many reports in my ASP.Net 3.5 app's and using VB Code-behind. I have the following code that will take the report from the reportviewer and on a click of a button, export it to PDF. So now, I can hide the reportviewer and just have the button click events generate my PDF's. I do not know how to tweak this code to enable me to print directly from another button's click event without the reportviewer being visible.
[Code]....
What I am looking for is how to fill the tableadapter that I am using in the .xsd dataset file to the I do not have to incorporate reportviewers anymore?I know my code above would need to be adjusted so that its not looking at ReportViewer1 for the Report/Data... But I do not know how to do this.
I have a reportviewer that uses a dynamically generated RDLC (which means the RDLC is created at run-time through an XSL) to generate reports. I have no issue loading the report. My problem is with its toolbar. It is always disabled. I can't perform search, change the report size, or export the report to another file format.
View 6 RepliesI'm using ReportViewer for the first time and was wondering if it's possible to Center the toolbar instead of leaving it left-justified?
View 2 Repliesi would be glad for a kind assistance on how to print reportviewer without showing the reportviewer or the toolbar? this is my code to bind report
[Code]....
I am new to this sql reporting service. But anyhow by surfing I am able to bind the report but i was stuck in image display.Anyways, i also managed that. But the real problem is whenever i was keeping a image control in rdlc report i was having session prob. If i remove the image control then as usual report works fine.either for session problem or for image display. I am keeping the image name in database but for binding the rdlc report i am using a store procedure which return the path (static) concating with the image name(kept in database).
View 3 RepliesI am using Visual Studio 2005 and Report Viewer to generate a few reports that I extract from a MS SQL 2005 DB. Everything is working fine, but I want to be able to pass 2 parameters from my ASP.NET C# file to the report file (.rdlc) and show it on the generated report.
My C# file has these lines, which I believe pass the parameters off
Code:
i have installed sql server 2008 with reporting service and visual studio 2008 and business intelligence when i create a new project asp.net web site, i need to use some report, so i add the control reportivewer in my page and in the property windows when i have to set the destination report, i am unable to set it, in the dropdown list does not compares nothinghow can i do?
View 2 Repliesi want to use reportviewer web control in my web site,so add assembleis in my bin root(Microsoft.ReportViewer.Common.dll,Microsoft.ReportViewer.WebForms.dll,Microsoft.ReportingServices.ProcessingObjectModel.dll)
and add xml tags in my web.config,in localhost all thing is right but when in upload web on my server and want to view reports i have this error:System.Security.SecurityException: That assembly does not allow partially trusted callers.
I set trust level in web.config to "full",medium,high and etc but my problem didnt solve.
We are building a website in ASP.NET 4 with VS2010 and we need to add some reports with ReportViewer control.
Is there any tutorial or examples that explain how to create a ReportViewer for differente languages in VS2010?
We use MS ReportViewer version 10.0.0.0 to pull the report from SSRS to ASP page.
Part of ReportViewer source code is shown below: (thru MS Developer Tools)
<div id="ctl00_RootContent_c_ReportViewer_ctl10" style="position: relative; width: 100%; height: 100%; overflow: auto;" _events="[object Object]" control="[object Object]">
We'd like to change the style="position: relative..." to style="position: static..."
How can we do it?
It seems that whenever ReportViewer refreshes, the CSS values will be reset back to default one.
How can I create my own CSS file for ReportViewer?
Is it possible to put a column of checkboxes in the ReportViewer so that a user can select multiple records and then click a button to have those records processed as a group?
View 1 Replies