SQL Server :: Implicit Conversion Of Varchar Value To Varchar
Jan 18, 2011
I have two database.one is "TEMS1" and another one is "TEMSLIVE"
"TEMS1" is my local database.
"TEMSLIVE" is client database.
my application is working fine while connecting to my local database. when connecting to client database("TEMSLIVE") it's shows "Msg 457, Level 16, State 1, Procedure GET_MY_TRAVEL_PENDING_ACTIONS, Line 53 Implicit conversion of varchar value to varchar cannot be performed because the collation of the value is unresolved due to a collation conflict." this error. i have compared "TEMS1" and "TEMSLIVE" stored procedure(GET_MY_TRAVEL_PENDING_ACTIONS),but both are identical only.
View 3 Replies
Similar Messages:
Sep 29, 2010
I have heard that even though the maximum varchar size is 8000, that we should not go higher than 7500 for the size value. What is the logic behind this advice?
View 1 Replies
Dec 24, 2010
Below one is model table, am getting strange issue, i dont know how overcome this issue
[Code]....
Even i tried to convert the varchar to numberic, and also am getting same issue.
Can any one please guide, how to convert the above one.
View 8 Replies
Aug 4, 2010
I get the following error "Conversion failed when converting the varchar value ' (' to data type int." when executing this code
View 2 Replies
Aug 9, 2010
<Conversion failed when converting the varchar value 'ID' to data type int.>am trying to insert datavalueField for a drop down list into a table column, its type is int. am using this syntax
[Code]....
View 3 Replies
Nov 7, 2010
Codes bigint
Model nvarchar(50)
Customer nvarchar(250)
ShipDate date Checked
DeliveryNoteNumber int Checked
ItemCode nvarchar(50) Checked
Description nvarchar(250) Checke
View 2 Replies
Mar 10, 2010
error: The conversion of the varchar value '0000033878000010001' overflowed an int column. Maximum integer value exceeded.I am trying to call ('0000033878000010001')this value from stored procedure.I pass 3 parameters and it should generate this value and insert it in one table.I am able to do this with (000010001) this part of the value.ut i also need constant(0000033878) value append to the above codeif i try to do so i am getting("The conversion of the varchar value '0000033878000010001' overflowed an int column. Maximum integer value exceeded." )this error at this
View 5 Replies
Jul 3, 2010
I am trying to get text box values into a database from a asp.net form. In my SQL server database I have defined the field emailID as nvarchar(50) and I still get the error messageconversion failed when converting the varchar value abcd@efg.com to type int" I am not trying to convert it int so my guess is SQL server is doing some kind of implicit conversion.
View 2 Replies
Apr 27, 2016
I have a table for R&D which has following cols:
EmpID|EmpName|EmpLname|
and i want to insert values using parameters from Stored procedure as:
declare @EMPID int;
declare @EmpName varchar(50);
Declare @EmpLname varchar(50);
Declare @aa varchar(max);
[code]...
once executing, I am getting following error: Conversion failed when converting the varchar value 'insert into Employee(EMPID,EMPNAME,EMPLname) select ' to data type int.
View 1 Replies
May 7, 2015
i am binding the datalist using this code and store procedure. the code works fine if i pass only 1 id, but i have an array which have multiple id's separated by comma like 1,3,5, and i want to use this in the @Id parameter , but i get below conversion error: An exception of type 'System.Data.SqlClient.SqlException' occurred in System.Data.dll but was not handled in user code Additional information: Conversion failed when converting the varchar value '1, 3, 4, 5, 6, 7' to data type int. Code behind code is:
private void PageBind(Int32 pno) {
Int32 nor, repcol;
nor = Convert.ToInt32(DropDownList1.SelectedValue);
SqlCommand cmd = new SqlCommand();
cmd.CommandText = "Display_Search_Records";
[Code] ....
View 1 Replies
Dec 28, 2010
how can set length of varchar more then 8000?
View 3 Replies
Mar 15, 2011
I know that varchar(n) in sql server specifies that a variable character of n bytes can be stored But what value of "n" should I choose if I have to store a string of say 100 character in that field. I am not able to decide the size of varchar when creating a table in database when I have to store a string of say 50 characters or string or 100 or say 1000 characters.
View 8 Replies
Nov 12, 2010
I'm trying to compare a string from a label to a varchar(50) in my database. String Occasion = '1 2010-07-07 10:00' compared to varchar(50) OccasionID = '1 2010-07-07 10:00'
[Code]....
[Code]....
I've checked that the values really are identical in the debug. I was under the impression that no conversion is neccessary between string and varchar, but maybe I'm wrong.
View 6 Replies
Mar 7, 2011
I am using sql server 2008. Could anyone tell me the differance between varchar(25) and nvarchar(25)? Which is more efficient?
View 3 Replies
Sep 30, 2010
I'm trying to create a stored procedure that get a Key and Name (both varchar), the procedure will check if a the key allready exists in the table, if it exists it will update the name, if its not exists it will add it to the table..
View 2 Replies
Dec 21, 2010
In SQL ......
"reading_i" is smallmoney
"reading_f" is smallmoney
CAST(ABS((reading_i - reading_f)) AS VARCHAR)
I want four decimal places alwaysfor example
reading_i = 3.123
reading_f = 1.23
I want 1.8930 (always four decimal places)
View 1 Replies
Nov 21, 2010
I have a doubt in regards to use varchar or nvarchar for portuguese content, so the question is:varchar support all portuguese chars? or must I use nvarchar (unicode)
View 2 Replies
Dec 4, 2010
i have a column in my table of type varchar (50)
beek1
beek10
beek3
beek6
beek61
beek2
i want to sort in my sql querry like this
beek1
beek2
beek3
beek6
beek10
beek61
View 5 Replies
Dec 4, 2010
how to write Sql querry to sort a column of type varchar (50) that contains number
a1
a2
a3
a11
a21
instead of
a1
a11
a2
a21
a3
View 9 Replies
Oct 25, 2010
Here are my codes:
[Code]....
And here's the error I got:
Implicit conversion from data type sql_variant to varbinary is not allowed. Use the CONVERT function to run this query.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Implicit conversion from data type sql_variant to varbinary is not allowed. Use the CONVERT function to run this query.
View 20 Replies
Dec 2, 2010
Page1 contains GridView1 which displays info from Table1.GridView1 contains a CommandButton which, when clicked inserts the values of all columns, plus a calculated value which goes into an extra column into Table2 handled in the RowCommand event handler of GridView1.Page2 contains GridView2 which displays info from Table2.GridView2 allows the user to alter the value of one of the columns in Table2 using the standard Edit/Update link.All this worked well until...I added UserId and SessionId fields to Table2 (uniqueidentifier and varchar(MAX) respectively,I added the following code to Page1 Code Behind to insert these values from the RowCommand handler:
[Code]....
All of this works beautifully. But... I then added this code to GridView2's RowUpdating event handler:
[Code]....
View 3 Replies
Mar 23, 2011
So I have a ntext column in a table with a combination of large random data (hence why ntext in the first place) and sometimes contains a uniqueidentifier.
I need to find and delete rows based on the uniqueidentifier.
I can't do the comparison with it being ntext, but I changed it to varchar(max) in my dev enviornment and it let me do it without any warnings and I can now do my comparison like I want to, so all is good.
I just want to make sure I'm not changing any of my large random data by changing the data type.
View 4 Replies
May 18, 2010
My filter Expression was working fine with filtering by Control Parameters.When I added the Phone Parameter it went nuts - with the Phone Parameter the GridView just Comes out blank upon loading the page (without it would show Select * from Individuals)Is it because the phone field is populated with numbers? Don't get it.... In the SQL server the 'phone' field is set to 'varchar(30)' and nulls are allowed.here is my code:
[Code]....
View 4 Replies
Mar 7, 2013
Select number,empname,empfathername from emp
where number column is float data type
I need first four dights of number where it consists 10 digits.
num is 1234567890
O/P like to be
1234
View 1 Replies
Feb 1, 2011
I want to change one of my table columns data type. Now the column data type is varchar and i want to change it to float. Updated all the column data to numeric and tried to convert the datatype with the following syntax
alter table vibration_values alter column dis_v float
but getting the error as
Error converting data type varchar to float.
The statement has been terminated.
Suprisingly every thing worked well in sqlserver 2005 and not working in sqlserver 2000.
View 6 Replies
