i save picture as image in sql database for user profile
now i have a page that sow user profile information an im this page i have a image control to show user avatar with.
in code behind with Userprofile.Avatar code i got the image as byte
how can i bind the image with this code?
Is it better to store the image into sql server as a byte array or store the image's location to sql server and the image to the server?
View 2 RepliesNot sure if this is the correct section to ask this but this is regarding storing datatype problem.im trying to convert an image file retrieve from a folder and convert it to Byte so that i can save into database
In below function i retrieve and convert the image from a folder to byte
[Code]....
Then i set ImageUrl in PageLoad
[Code]....
My image datatype in database is image
i have used filestream of sql server 2008 for storing images. i want to retrive that image and bind to image control.but not getting the correct path.
View 2 Replieswe can bind the image with detailsview.
see following code
[Code]...
I have a working application to save an image file to my sql database (Saves as "Original_Image" in the DB TBL_ImageGallery). I have a file limit on the upload of 1 MB. This also works great and the image is being saved beautifully. I found a bit of an issue. Being i am working on a network with 2 bonded T1 connections the streaming of images to my site, when tested internally, is effortless. I am not sure that this will be the same with a generic bandwidth. I want to store the original image size into the databse (already done) but also store a smaller sized (in bytes not actual size [Width, Height]) to my database in a "ThumbNail" column. This will allow the browser to only have to pass the "Thumbnail" sized image, obviously this needs to be much smaller than the original (ex: 1MB orignal I want to save as 12KB image in the thumbnail column), to the thumbnail img control in the user's interface.
I am not sure if this is possible or if there is a need of third party controls. I am interested in doing this as either a stored procedure or in the C# code on an event fire. There may be a better / other solution to this and if that is the case I am also interested
I am using web services to retrieve one record from database. here in this record there is one image field.In web service, the record is converted to xml document and sent to client
when i send this record to client thru webservice , this photo is converted as byte[].
to check before giving to client, i checked my webservice. for that i took a new .aspx page and i retreived my record in to dataset and binded that to gridview. In gridview, I could see my image in byte[] format
I want to change this byte[] to previous image format in my asp.net page.
I am unable to change. I searched in google, I am unable to solve my problem.
How can I save image in db as byte array and show the saved image as slide show in my web page with C# asp.net 3.5
View 1 RepliesIs there a control that you can use? It can be done by fetching a binaryread from an aspx page but why there isn't a simple free image control that you can put in the page and feed it a byte array?
View 15 Repliesi got an image display in my system, note that it is not an uploaded file, it is display in <asp:Image> form
My question is, how do i use that image and convert it to a byte data so that i can save into database?
I get the data of the stored image on database as byte[] array;then I convert it to System.Drawing.Image like the code shown below;
public System.Drawing.Image CreateImage(byte[] bytes)
{
System.IO.MemoryStream memoryStream = new System.IO.MemoryStream(bytes);
[code]...
I am develping an application that integrates with an RFID kit. The problem is, the kit comes with an .cs class that accepts data stored in a byte array however, each information stored in the array respresents an int. I wanted to store String information in each array but, my research suggest that a String itself can be converted to a byte array and not a byte....here the code from the .cs class:
byte BlockNo = 0;
byte[] BlockData = new byte[16];
byte ReturnCode = 0;
[code]....
Each t_b*.text respresents an int. Is there a way I can stored a String in a single byte block?
i am not getting the output. I can able to display the image using generic handler.What i need is to display without using generic handler.
View 1 RepliesI have implemented the following functionality that connects to webservice and downloads a favicon from a given site and saves it to a byte[] which I store in our database. I now want to set it up so that it saves the icon to the disk. However I am getting a "Parameter is not valid" when I try and create the image from the byte[].My code is as follows..
stream.Write(imageByteArray, 0, imageByteArray.Length);
Image i = Image.FromStream(stream); // EXCEPTION HAPPENS HERE.
i.Save(@"C: mp" + filename + ".ico");
The exception occurs on the middle line. This code works perfectly 9 times out of ten, but for some favicons, even thought the icon is a valid image (or at least it appears to be and it shows in the browser when point at it) I get this exception. Does anyone have any ideas? I am pulling my hair out here!
if (Session["image"] != null)
{
ImageButton1.ImageUrl = "~/IMAGE/pic.jpg?" + DateTime.Now.Ticks.ToString();
}
The session key image is from another aspx page
{
string strPhoto = Request.Form["imageData"]; //Get the image from flash file
byte[] photo = Convert.FromBase64String(strPhoto);
FileStream fs = new FileStream(Server.MapPath("~/IMAGE/pic.jpg"), FileMode.OpenOrCreate,
[Code]....
The issue is
Operand type clash: nvarchar is incompatible with image.
ArrayList lstEndPoints
0 element "0x01"
1 element "0x82"
byte b = (byte)(lstEndPoints[0]); //Error cannot convert
[URL]
i am failing to get the Base64 string and show it as an image in the output pdf file.
I have a signautre canvas that saves the output directly into the sql database.
How to show defalut image in datalist untill large image fully loaded in same datalist ?
View 1 RepliesI Have a Image Tags In My Web Application. I Upload The Image Path and stored In Database. How To Retrieve the Image Path Into Images Tags Using Database in Asp.Net..
View 1 RepliesI got a variable of type System.Drawing.Image and need to convert it to a variable of type byte so I can store the image in the database. Can someone show me how to do that in VB.NET code.
View 2 RepliesI am able to export an Excel file from Bytes and prompt the user to download/save when clicking an Export button (asp:button#btnExport). The download works fine when testing in VS2008 but when I deploy on the server (HTTPS), the browser returns the error"Unable to download showReport.aspx" from www.myserver.com
Unable to to open this internet site. The requested site is either unavailable or cannot be found. Please try again later"Below is the code. Any suggestions please?PS:byteArray contains the Excel data I am sending to the client.
[Code]....
I am using asp:image to bind image in datalist itemTemplate. but it does not bind i mean the image does not displayed. my source is:
<asp:Image ID="imgPhoto" runat="server" ImageUrl='<%#Eval("Images") %>' Width ="90px" Height ="100px"/>
i have a gridview, i have one images folder. in the database i have image path.
using that path i want to bind those images to gridview. but images are not displaying.
my gridvew code is.
--------------------------
<
asp:GridView
ID="GV"
runat="server"
AutoGenerateColumns
="false"
>
<Columns
>
<asp:BoundField
HeaderText
="ID"
DataField
="eid"
/>
<asp:BoundField
HeaderText
="ENAME"
DataField
="ename"
/>
<asp:BoundField
HeaderText
="IMAGE PATH"
DataField
="image"
/>
<asp:TemplateField
HeaderText
="IMAGE">
<ItemTemplate
>
<asp:Label
ID="LblId"
runat="server"
Visible="false"
></asp:Label
>
<asp:Image
ID="Image1"
ImageUrl='<%# (string) FormatImageUrl( (string) Eval("image")) %>'
runat="server"
/>
</ItemTemplate>
</asp:TemplateField
>
</Columns
>
</asp:GridView
>
my aspx.cs code is
-----------------
public partial
class
ShowList : System.Web.UI.Page
{
protected
void Page_Load(object sender,
EventArgs e)
{
BindData();
}
protected
string FormatImageUrl(string image)
{
if (image !=
null && image.Length > 0)
{
return image;
}
else
return
null;
}
private
void BindData()
{
DataSet ds =
new
DataSet();
ds = BusinessLogic.FetchDetails();
GV.DataSource = ds;
GV.DataBind();
}
}
when ever i debug the program dataset contains all the images. but those are not binded to gridvew.
I am using details view to insert or update record and i am binding it with grid view.when i click on row in grid view for edit it displays the record in details view for edit.How can i dispalay a image in details view?.
View 2 RepliesHow to call different images in <asp: Image> tag for every row of gridview.I used below code as per my requirement (HTML code):
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" Caption="Customer List" EmptyDataText="You have deleted all records in customer list">
<RowStyle Height="40px" />
<Columns>
<asp:TemplateField>
<ItemTemplate>
[code]....
Only difficulty im facing is how to bind different images in "ImageUrl" for every row of Gridview.Note: Images are not saved in DB.