SQL Server :: Connect Two Queries Beside Each Other?
Sep 14, 2010I have to subqueries and i need them to be sidebyside but when i "union all" one goes under.
What is the way i can have them appear beside each other?
Similar Messages:
SQL Server :: How To Union Two Queries Without Duplicates
Aug 27, 2010I have a sql query that returns 4 columns CustName CustId CustZip CustPhone
I have a second sql query that returns the following 5 columns
CustName CustId CustZip CustEmail CustAddress
Both queries, query different data tables in the database, but return columns that are common to
both.
How do I union the two queries(Assuming a union is needed)
Which will result in no duplicates and an end result being the following output:
CustName CustId CustZip CustPhone CustEmail CustAddress
As you can see we want to not have duplicate values on output. So something like the following
is not acceptable:
Jeff Stamper 2222234 81224 498-300-2222
Jeff Stamper 2222234 81224 498-300-2222 js@jj.com 122 Mars Blvd
Karen Bops 3322234 81666 498-300-2222
Karen Bops 3322234 81666 498-300-2222 kb@lpo.com 322 Jamer Road
SQL Server :: Run Multiple MS Update Queries
Sep 11, 2010On satisfying the If condition, I need to run 2 MS SQL update queries. How can I accomplish this? I am using C# as the server side language.
View 6 RepliesSQL Server :: SUM In Multiple Queries Of Each Table
Dec 21, 2010I want to find the sum of each tables fileld. how can do this. i tried the following.but could nt get the correct sum. "SELECT SUM(gb) FROM data20 union all SELECT SUM(gb) FROM data10 union all SELECT SUM(gb) FROM data5 union all SELECT SUM(gb) FROM data6"
View 7 RepliesSQL Server :: Combine Two Queries In One Resultset?
Sep 6, 2010I want to combine two queries like :
select name as name1 from table1 where id = 6
and
select name as name2 from table1 where id = 2.
I need a single resultset. How can I do that?
SQL Server :: How To Debug Queries And Stored Procedures
Mar 24, 2011How to debug queries and stored procedures in sql server 2008 like we doing in vs
View 1 RepliesSQL Server :: Combine Two Self Referencing Queries In A Function?
Feb 23, 2011I have a menu table which has a (mostly) unlimited number of levels/tiers:
[Code]....
I also have a working function which will give the up and down tiers based on a given MainMenuId:
[Code]....
My question is, is there a better way to do this such as combining the two querries? Every attempt I have made results in a "The Statement terminated. The maximum recursion 100 has been exhausted before statement completion"
SQL Server :: Run Multiple Queries On Single Button Click
Jan 29, 2011how to run multiple queries on a single button click. Actually I want whatever a user write in text box and click the button the text would get inserted in table category and also a table name project should get updated. I am using Sql server 2005 and c#
View 2 RepliesSQL Server :: Can Execute Different Queries In A Stored Procedure Same Time
Jan 11, 2011In my stored procedure there are 8 queries for 8 tables.Each query has joins and sub queries. I am passing parameters & stored procedure name from front end(designed in asp.net 3.5) can we execute that 8 queries at the same time i.e. parallel execution so that I can minimize stored procedure execution time?
View 6 RepliesQuarantine SQL Server Queries In 3.5 - Set A Particular Db / Connection String To Timeout After X Seconds?
Nov 15, 2010Alright, we have two database servers, one is owned by us, one owned by a partner. Our partners have been having issues lately that have been causing us numerous sql timeout errors, which takes down our whole system. We'd prefer to limit the time those queries can take to say 20 seconds max, otherwise quit trying and throw the error (which we can catch with a try/catch block). Couple of questions: Is there a way to set a particular db/connection string to timeout after X seconds? Is this the best way to quarantine that other system? or are there better ways to go about this?
View 2 RepliesDo SQL Queries Towards An SQL 2005 Express Server And Format The Return Value To JSON?
Feb 19, 2010I'm completely new to both VB.NET and JSON, and I'm trying to figure out how to do SQL queries towards an SQL 2005 Express server and format the return value to JSON. I got the queries working using this (perhaps very newbie-like) code;
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.UI
Imports System.Web.UI.WebControls
Partial Public Class SQLConnect
Inherits System.Web.UI.Page
'Defines SQL variables
Dim con As New SqlConnection
Dim cmd As New SqlCommand
Dim dr As SqlDataReader
Dim ReadData As String
Dim i As Integer
Sub Click(ByVal s As Object, ByVal e As EventArgs)
'Define SQL address, database, username and password
con.ConnectionString = "Data Source=localhostSQLEXPRESS;Initial Catalog=tempdb;User ID=tesst;Password=test"
Try
'Initialize connection
con.Open()
'Specify SQL query
cmd = New SqlCommand("SELECT * FROM Member", con)
'Execute query, dump result array into variable
dr = cmd.ExecuteReader()
messageLabel.Text = "<br />Connection established<br />"
While (dr.Read)
i = 0
For i = 0 To dr.FieldCount - 1
'Dump query results into a variable
ReadData += dr.Item(i).ToString
Next
End While
'Print query results
messageLabel2.Text = ReadData
'Close connection
con.Close()
Catch ex As Exception
messageLabel.Text = "<br />Connection failed<br />"
End Try
End Sub
End Class
I have been looking at this, and I would love to see some code examples using this class or any other good method.
SQL Server :: Ad Hoc Queries - Open An Excel File And Insert The Data
Aug 11, 2010We moved to a new SQL server and I started getting an error on one of my sps only when I ran it from a website. If I manually ran the sp it worked fine. The error I got was this System.Data.SqlClient.SqlException: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode. I can tell you that this sp does some things, then calls another sp which writes some sql to open an excel file and insert the data. Here is the pseudo
SET @sql = 'INSERT INTO dbo.TempParts (partKey, partKeyNumeric, partKeyAlpha, PartNumber, [Description], Comment, notAvailable ,BatchID)
Save User Credentials On Server For Running Queries In Background?
Apr 1, 2011We have an ASP.NET / Silveright web application. The silverlight client displays user specific data in a graphical form - it requests the data from the server: Problem: Getting this data is expensive, due to the underlying database queries that the server has to perform - so the client has to wait... Optimisation Idea: We run the database queries at regular intervals on the server, writing the results to a 'userdata' table in a database 'close' to where the ASP.NET server runs. The process of running the queries and writing the data to the tables is performed by a 'data collection' service, which is separated from the ASP.NET server.
When the client requests data the server retrieves it from a 'userdata' table. This should be nice and quick - we probably have the 'userdata' tables on the same machine as the ASP.NET server. We also have the added benefit that the client sees data even if the underlying database is offline. Of course the data is not live - but all data is potentially old as soon as it reaches the client. So now my Problem: The 'data collection' service needs the user credentials in order to perform these database queries (because each user gets different results for the same query).
How can I store user credentials in a database, in an acceptable 'secure' way? Such that the 'data collection' can impersonate a user to perform the database queries. Our initial scenario is based upon using windows integrated login to the database.
SQL Server :: This Version Of Microsoft SQL Server Management Studio Can Only Be Used To Connect To SQL Server?
Jan 20, 2011I have SQL Server 2005 in my computer.I am using SQL Server 2005 for Development.
I can connect to my local & "COMPAQSQLEXPRESS" Server.
But while connecting to Remote Server i m getting the following error
TITLE: Connect to Server
------------------------------
Cannot connect to x.x.xxx.xx.
------------------------------
ADDITIONAL INFORMATION:
This version of Microsoft SQL Server Management Studio can only be used to connect to SQL Server 2000 and SQL Server 2005 servers. (ConnectionDlg)
------------------------------
BUTTONS:OK
-----------------------------
SQL Server :: How To Connect To Local Instance Of SQL Server 2008 Management Studio Express
Aug 27, 2010I just installed SQL Server 2008 Management studio Express on my Vista machine.i tried connecting to local machine using :
.sqlexpress, (local)sqlexpress, or .SQLExpress, MyPCNAMESQLExpress
nothing is working, getting this error:
-----------------------------
Cannot connect to PC-NAMESQLEXPRESS. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
----------------------------
Visual Studio :: Cannot Connect To Development Server After Closing The Server And Restarting The Project
Sep 29, 2010I'm getting "Cannot connect to ASP.NET development server" almost every time I stop the ASP.NET server before restarting the project in debug mode. It can take between 15 seconds and 2 minutes to get the error message, and Visual Studio is frozen.
Sometimes I get three in a row, and I have to wait 2 minutes each time, or go into Task Manager and kill to process. Then I have to start Visual Studio 2010 again, which is at least three times slower than Visual Studio 2008 to open.
It's *extremely* annoying. I know I don't have to close the server if the code has changed, but sometimes I simply want to restart my website in debug mode (there is a cache on most web service calls, so this clears the cache). A workaround is to add "foo" code to a class and restart the project.
I'm running Visual Studio 2010 Professional on Windows Server 2008. I'm running the Visual Studio Power Tools too, with the latest update.
Sending Mail With Godaddy Server / The Transport Failed To Connect To The Server
Feb 15, 2011i'm using asp.net 3.5 and my site is hosted on godaddy i have a contact us form on the site. and i have to send the contact queries on [URL] which is hosted on godaddy. whenever i try sending mails i get this error
The transport failed to connect to the server.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The transport failed to connect to the server.
Source Error:
[Code]....
Line 250: SmtpMail.SmtpServer = "smtpout.asia.secureserver.net";
Line 251: mailmsg.Priority = System.Web.Mail.MailPriority.Normal;
Line 252: SmtpMail.Send(mailmsg);
Line 253: }
Line 254: }
i tried changing smtp to relay-hosting.secureserver.net aswell. but it didn't work. i'm using this method of my classfile's sendmail class public void SendMessage(string From, string ToEmail, string subject,string body)
SQL Server :: ConnectionOpen (Connect()).SQL Server Doesn't Exist Or Access Denied
Oct 22, 2010I get the follwowing exception while running my ASP.NET 1.1 web application. The Web application will call a web service which connects to to the DB server and returns the data to the application. This error occurs when we move the webservices and databases to new servers. I am able to connect to the DB server from web servers through SQL port.
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SqlClient.SqlCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillFromCommand(Object
data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
Why does this error occur and how to solve this?
DataSource Controls :: How To Connect Server Explorer To A Remote SQL Server Database
Mar 13, 2010I have created web pages using VS Web Developer that use a local Developer Edition of SQL server database on my PC with LINQ to SQL. When I deploy my website to a remote web host SQL server, I need for my web pages to be able to use the remote database instead of the local database. So, how do I get the Server Explorer to connect with a remote SQL Server database?
View 6 RepliesRead All File Names On Ftp Server / Unable To Connect To The Remote Server
May 27, 2010I tried this code by inputting the ftp address as ftp//: and the correct username and password and I get the following error
"Unable to connect to the remote server" on line :
FtpWebResponse Response = (FtpWebResponse)Request.GetResponse();I tired this on my ftp server provided by a hosting service and an anonymous ftp located at 193.166.120.5 ?
Note: I was able to connect to both of these ftp through filezilla, via a webbrowser, and through windows command line.
SQL Server :: 2008 Connect To A Remote Server - Network - Related Or Instance - Specific Error
Aug 4, 2010I am using Sql Server 2008 to connect to a Remote Server. Everything was working fine for the last couple of months, and i was successfully connecting to the remote server. Today it suddenly stopped connecting to the remote server. note that i did not alter any configuration settings. Did my isp block Sql Server. My ISP is using ISA SERVER? The error details are:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider) I am using Microsoft Firewall Client For ISA Server for opening ports. But today nothing is working.
SQL Server :: Project Executable Can't Connect With Database Unless Installing SQL Server
Nov 7, 2010I am developing and app to find automatically characters stats with the 2nd edition dnd rules to be easy for my party to create characters when we play.
I am using Visual studio 2010 c sharp express and Sql 2008 express R2.I have added a database in the project to have all the data needed. When I use the release folder or the debug folder on other pcs the app doesn't run. Wherever I install SQL server (database and management) things are fine. I googled but I am not sure what to look exactly for and made a brief search here but with no results. I am trying to make sth that has almost no dependencies but well I can't avoid installing .net framework 4 everywhere...
Is there anyway to make database work without installing SQL? Is there any workaround like a dll or sth?
Connect To Local Sql Server 2005 To Online Sql Server 2008
Nov 1, 2010OLE DB provider "SQLNCLI" for linked server "xx.xxx.xxx.xxx" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
View 1 RepliesDataSource Controls :: SQL Server Engine Cannot Connect To Instance Of SQL Server
Jun 22, 2010I just ran a project that I've been working on and the project couldn't connect to the sql server engine. This project worked fine yesterday. This morning I installed the new Adobe Flash player 10.0. That's the only thing that's changed sine I last worked with my project.
I got an exception for the sql server error when I run my app. This is the exception from the app:
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I tried to connect to the engine with the ssms but couldn't connect that way either. This gave me an error that said:TITLE: Connect to Server
SQL Server :: How To Connect Etdb.mdf To SQL Server Import And Export Wizard
Aug 19, 2010I have recently upgraded my system from Visual Studio 2008 to Visual Studio 2010. I have MS SQL Server 2008 RS installed as well as IIS7 and I am able to connect to my web application on my local server (IIS7).
View 1 Replies