I added the create user wizard to my page, have everything working, but have a question about the continue button that shows up after words..If it was successful, it shows complete and then a continue button, but when you click on it it doesnt do anything. So i'd like to either have it return to the create new user window since i have this wizard on a page where the admin can manage all users. so after a successful insert, return to the create user so they can create another OR change the continue button to a create new user button which then displays the wizard again.
I noticed this server control is unique in that even though you can convert it to template, you still cannot access the Create User button, unlike most composite user controls, where every child control is accessible after you convert the server controls to templates.
I am completely stuck here. Basically, I am serving a file to the user by sending it using Respnse.BinaryWrite. I am also sending this on a redirected page so as not to destroy the Response stream of the webpage which fired the filedownload. This works perfect on my development machine, it also works perfect on Firefox.However, if I publish to my test server, on IE 8 (and 7 I presume) a security warning bar appears (does not appear in dev mode on my pc), asking the user to accept or decline the file. Now the not-so-funny thing: If the user accepts, the file is NOT served, I just get back to my main webpage. If the user tries a second time to get the file the security question will NOT pop up again and the file is served.How can I make sure the file is served in the first instance if the user accepts the security warning and wants to download?
I'm running into an issue where in IE the security dialog is popping up and if I click download File the file is never downloaded..it just goes back to the main page.
I have modal popup extender with two buttons called continue and cancel within it.I get this popup warning when session is going to expire.When I click cancel button it should logout me and when I click continue button it should extend my session for next 20 minutes. Both button gets trigered when I click them.Problem is that when I click continue button it should extend session for another 20 minutes and alert should disapper.That doesn't work.
I customized CreateUserWizard, added WizardSteps.... If I reload the page (F5) and I am in Step3, it goes back to the first step. How do I remain in the same Wizardstep if the user refreshes the page.
I have a blank page with a Captcha called Captcha.aspx. I would like to add this as the second step to a CreateUserwizard. The following is what I want to achieve:i) User enters their Username etc in CreateUserwizard and clicks the CreateUser Button(ii) After clicking the CreateUser button, user sees the Captcha.aspx page and enters the correct stuff in the Captcha box and click a continue button(iii) User account is created if correct details were entered in the Captcha else no account is created, rather the user is sent to a page informing him or her that no account has been created
I like to create users without the userwizard.Normally i do this with the userwizard, but i don't have it right now, want to do it with pure code.But how can i add the password to the user?Normally i use this code:
ProfileCommon p = (ProfileCommon)ProfileCommon.Create(CreateUserWizard.UserName, true); p.Email = ((TextBox)CreateUserWizard.CreateUserStep.ContentTemplateContainer.FindControl("Email")).Text; p.Save();
What is the best, i want just the easy way, like if i add a user with the Asp.Net web administration tool.
I'm using the ASP.NET Membership system to add new users to my site. It's working fine. But I'd like to force the user to enter additional required information (on a different aspx page) before they can successfully complete the registration process. What is the easiest way to direct and force the user to complete a different page of fields (stored in SQL in columns located on the same table as the basic membership fields) as a condition of completing the registration process?
In searching different sites, I see additional properties and templates like Wizard Steps, Continue button, Finish button---but I'm not clear as to which of these (perhaps none of them?) will allow me to accomplish this goal.
I have a createuserwizard where people input their information. When I hit enter after typing in the data in the form it returns me to the homepage. How do I set the default button for the createuserwizard so that it goes to the next step rather then back to my homepage.
I'm not sure if it has to do with the fact that I have a defaultbutton set in a form in the masterpage and that defaultbutton overides the other pages defualtbutton....
In a CreateUserWizard there are 2 dropdownlist to set the country and city of a new user. Where and how can those dropdownlists be assigned datasources from datareader, refreshed and accessed in codebehind for interaction between country and city? I tried but keep getting errors saying control not found. Is it impossible to do codebehind events with CreateUserWizard?
1) Extend the CreateUserWizard control to insert additional User fields (eg. Gender, Age, Occupation, Address, Phone, etc...).
OR
2) Create a brand new Custom Membership Provider of my own and skip using the inbuilt ASP.NET membership system.
What is the best way to create a new User system with my own tables of User data as described above?
Should i perhaps still use the standard ASP.NET membership system and then extend my own Registration page to add more User data to my own SQL backend table using the Identity value inserted into the aspnet_users table?
I have created a C# registration page that includes a secret question and answer. The secret questions are in a dropdown list. When the form is submitted, all field information gets written to my mssql database successfully but the value selected in the dropdown ListItem gets NULL inserted instead of the question.
I have a createuserwizard which has been working recently. Even though the form has the necessary validation elements like requiredfieldvalidator, comparevalidator and so on, the validation on client side does not fire and form is submitted and saved.I checked twice the code, nothing seemed wrong and have no what might it caused.
I'm using the CreatUserWizard control along with my MembershipProvider. It all works fine bout a year now Recently there has been a new requirement to reserve some usernames. There is no need to go in details i think. Point is that i want to manually raise the same error the control raises when a user tries to register a username that has already been registered (i.e. DuplicateUserName) so the situation is handled the same way as when username really is a duplicate in aspMembership. Have tried differnet things with no luck, what would you advise me doing?
I am trying to customize the CreateUserWizard control....I added a couple of text boxes with First name, last name in the create userwizard....But the problem is i cannot access the textbox from the code behind....The text boxes which i included in the code are marked in Bold Here is the code for the CreateUserwizard Control
In step 1, the user will check to see if the username is available. If so, when the control gets to Step3, I want to have the text that is in the WizardStepLoginName txtLogin textbox to automatically populate the "UserName" textbox in the CreateUserWizardStep1 step.
I am having problems getting my asp:CreateUserWizard FinishDestinationPageUrl to work. I have an OnCreatedUser method that is firing just fine, but after that, it just stays on the same page.Here is the markup:
[Code]....
When users register, I want them to go to a default page, unless a return url has been passed in.
i have used createuserwizard control in my project (v.s 2010 ) using c# and i want to do some modifications like i have to set user roles automatically while registering,
I can't seem to add a new member when using the CreateUserWizard.... All my validation seems to be working...I don't think it is wired up correctly though because: 1. No user is added to the database (remote) 2. CompleteWizardStep does not fireI tried to see if anything was happening by stepping through the page's VB code and flagged...AddUserWizard_CreatedUser sub...but it did not fire...I created a user using the built-in ASP.NET Configuration Wizard.. I also created a login file and I can successfully login.... just can't create a user with the CreateUserWizardmy hunch after some investigating is that I am missing something in my web.config file...I suspect I need something under the <authentication> tag???
I am using the CreateUserWizard to create users in my new project (I am a complete newbie), but the wizard currently requires information from the user that is redundant for what I need. For example, I don't want security question & answer in my form, but I am not sure how to remove them. If I just remove the text fields, it says they are missing. I am pretty sure I know how to require further information, but I am not sure how to remove some of the defaults from the wizard. Removing the columns from the SQL server shouldn't be a problem.
So, I am looking for a place to edit which information it should gather (and removing some of the defaults) and the SQL insertion code so I don't gather information I will never need and use.
Using VWD 2010/Express I started by creating a new "ASP.Net Web Site" so I got a jump-start with security,master page,and other content.I connected successfully to a SQL/Server database and all was working well, a while ago.I successfully registered new users,assigned roles,etc.I went on and made many other changes to the rest of the project - the only change I made in any of the security objects was that I added a "FullName" column to the Membership table.
That was a while ago.I just tried to add a new user(haven't done that for a while) and the registration form throws the exception shown below.All other authencation forms seem to work correctly - I can still add/change roles,etc.
As part of trying to find the problem,I created a new page and just dropped the CreateUserWizard on to it with no customization(I know, the database behind it still has that additional column),and I get the same error message.Are we not supposed to make any changes to aspnet_Membership ?
(Yes - I will eventually have to remove that column and see if that makes the problem go away,but I'm addressing a different problem with permissions with my database hosting service)
Dave -----------------------------------------Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: INSERT failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations.Cannot insert the value NULL into column 'UserId', table 'DB2323_123.dbo.aspnet_Membership'; column does not allow nulls.INSERT fails. The statement has been terminated.
Server Error in '/' Application.
INSERT failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations. Cannot insert the value NULL into column 'UserId', table 'DB2323_123.dbo.aspnet_Membership'; column does not allow nulls.INSERT fails. The statement has been terminated.
I am experimenting with the customization of the createuserwizard by creating textboxes for FirstName and Last Name. I have altered the web.config file to add the fields, but where does the actual data get stored? What C# code do I need to create, if any?
