In a CreateUserWizard there are 2 dropdownlist to set the country and city of a new user. Where and how can those dropdownlists be assigned datasources from datareader, refreshed and accessed in codebehind for interaction between country and city? I tried but keep getting errors saying control not found. Is it impossible to do codebehind events with CreateUserWizard?
View 3 Replies
I customized CreateUserWizard, added WizardSteps.... If I reload the page (F5) and I am in Step3, it goes back to the first step. How do I remain in the same Wizardstep if the user refreshes the page.
View 2 RepliesI have a blank page with a Captcha called Captcha.aspx. I would like to add this as the second step to a CreateUserwizard. The following is what I want to achieve:i) User enters their Username etc in CreateUserwizard and clicks the CreateUser Button(ii) After clicking the CreateUser button, user sees the Captcha.aspx page and enters the correct stuff in the Captcha box and click a continue button(iii) User account is created if correct details were entered in the Captcha else no account is created, rather the user is sent to a page informing him or her that no account has been created
View 3 RepliesI like to create users without the userwizard.Normally i do this with the userwizard, but i don't have it right now, want to do it with pure code.But how can i add the password to the user?Normally i use this code:
ProfileCommon p = (ProfileCommon)ProfileCommon.Create(CreateUserWizard.UserName, true);
p.Email = ((TextBox)CreateUserWizard.CreateUserStep.ContentTemplateContainer.FindControl("Email")).Text;
p.Save();
What is the best, i want just the easy way, like if i add a user with the Asp.Net web administration tool.
I'm using the ASP.NET Membership system to add new users to my site. It's working fine. But I'd like to force the user to enter additional required information (on a different aspx page) before they can successfully complete the registration process. What is the easiest way to direct and force the user to complete a different page of fields (stored in SQL in columns located on the same table as the basic membership fields) as a condition of completing the registration process?
In searching different sites, I see additional properties and templates like Wizard Steps, Continue button, Finish button---but I'm not clear as to which of these (perhaps none of them?) will allow me to accomplish this goal.
How can I get UserID in next steps of wizards other than the first one ?
View 4 RepliesI have a createuserwizard where people input their information. When I hit enter after typing in the data in the form it returns me to the homepage. How do I set the default button for the createuserwizard so that it goes to the next step rather then back to my homepage.
I'm not sure if it has to do with the fact that I have a defaultbutton set in a form in the masterpage and that defaultbutton overides the other pages defualtbutton....
1) Extend the CreateUserWizard control to insert additional User fields (eg. Gender, Age, Occupation, Address, Phone, etc...).
OR
2) Create a brand new Custom Membership Provider of my own and skip using the inbuilt ASP.NET membership system.
What is the best way to create a new User system with my own tables of User data as described above?
Should i perhaps still use the standard ASP.NET membership system and then extend my own Registration page to add more User data to my own SQL backend table using the Identity value inserted into the aspnet_users table?
I have created a C# registration page that includes a secret question and answer. The secret questions are in a dropdown list. When the form is submitted, all field information gets written to my mssql database successfully but the value selected in the dropdown ListItem gets NULL inserted instead of the question.
What am I missing? Here is my code.
[Code]....
I have a createuserwizard which has been working recently. Even though the form has the necessary validation elements like requiredfieldvalidator, comparevalidator and so on, the validation on client side does not fire and form is submitted and saved.I checked twice the code, nothing seemed wrong and have no what might it caused.
View 11 RepliesI'm using the CreatUserWizard control along with my MembershipProvider. It all works fine bout a year now Recently there has been a new requirement to reserve some usernames. There is no need to go in details i think. Point is that i want to manually raise the same error the control raises when a user tries to register a username that has already been registered (i.e. DuplicateUserName) so the situation is handled the same way as when username really is a duplicate in aspMembership. Have tried differnet things with no luck, what would you advise me doing?
View 2 RepliesI am trying to customize the CreateUserWizard control....I added a couple of text boxes with First name, last name in the create userwizard....But the problem is i cannot access the textbox from the code behind....The text boxes which i included in the code are marked in Bold Here is the code for the CreateUserwizard Control
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server" OnCancelButtonClick="CreateUserWizard1_CancelButtonClick"
OnCreatingUser="CreateUserWizard1_CreatingUser" OnActiveStepChanged="CreateUserWizard1_ActiveStepChanged"
CancelDestinationPageUrl="~/Default.aspx" DisplayCancelButton="True" ContinueDestinationPageUrl="~/Default.aspx"
Width="320px" LoginCreatedUser="False" Height="295px" InvalidEmailErrorMessage="Please enter a valid email address.">
<StepNextButtonStyle CssClass="Button" />
<ContinueButtonStyle CssClass="Button" />
<CreateUserButtonStyle CssClass="Button" />
<StartNextButtonStyle CssClass="Button" />
<StepStyle CssClass="WpcClinicalText_Enabled" />
<CancelButtonStyle CssClass="Button" />
<StepPreviousButtonStyle CssClass="Button" />
<WizardSteps>...........................................
I have the following CreateUserWizard control that has 3 steps in it.
Step 1: WizardStepLoginName
Step 2: WizardStep2
Step 3: CreateUserWizardStep1
In step 1, the user will check to see if the username is available. If so, when the control gets to Step3, I want to have the text that is in the WizardStepLoginName txtLogin textbox to automatically populate the "UserName" textbox in the CreateUserWizardStep1 step.
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server" BackColor="#FFFBD6" BorderColor="#FFDFAD"
BorderStyle="Solid" BorderWidth="1px" Font-Names="Verdana"
Font-Size="10pt" Width="500px" ActiveStepIndex="3">
[code]...
I am having problems getting my asp:CreateUserWizard FinishDestinationPageUrl to work. I have an OnCreatedUser method that is firing just fine, but after that, it just stays on the same page.Here is the markup:
[Code]....
When users register, I want them to go to a default page, unless a return url has been passed in.
i have used createuserwizard control in my project (v.s 2010 ) using c# and i want to do some modifications like i have to set user roles automatically while registering,
View 1 RepliesI can't seem to add a new member when using the CreateUserWizard.... All my validation seems to be working...I don't think it is wired up correctly though because: 1. No user is added to the database (remote) 2. CompleteWizardStep does not fireI tried to see if anything was happening by stepping through the page's VB code and flagged...AddUserWizard_CreatedUser sub...but it did not fire...I created a user using the built-in ASP.NET Configuration Wizard.. I also created a login file and I can successfully login.... just can't create a user with the CreateUserWizardmy hunch after some investigating is that I am missing something in my web.config file...I suspect I need something under the <authentication> tag???
View 3 RepliesI set MailDefinition property in CreateUserWizard.Also, I added this to Aspx.cs page:
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server" OnSendingMail="Createuserwizard1_SendingMail">
<WizardSteps>
<asp:CreateUserWizardStep runat="server" /> [code]...
But when registering new user, it's not sending email.
I am using the CreateUserWizard to create users in my new project (I am a complete newbie), but the wizard currently requires information from the user that is redundant for what I need. For example, I don't want security question & answer in my form, but I am not sure how to remove them. If I just remove the text fields, it says they are missing. I am pretty sure I know how to require further information, but I am not sure how to remove some of the defaults from the wizard. Removing the columns from the SQL server shouldn't be a problem.
So, I am looking for a place to edit which information it should gather (and removing some of the defaults) and the SQL insertion code so I don't gather information I will never need and use.
Using VWD 2010/Express I started by creating a new "ASP.Net Web Site" so I got a jump-start with security,master page,and other content.I connected successfully to a SQL/Server database and all was working well, a while ago.I successfully registered new users,assigned roles,etc.I went on and made many other changes to the rest of the project - the only change I made in any of the security objects was that I added a "FullName" column to the Membership table.
That was a while ago.I just tried to add a new user(haven't done that for a while) and the registration form throws the exception shown below.All other authencation forms seem to work correctly - I can still add/change roles,etc.
As part of trying to find the problem,I created a new page and just dropped the CreateUserWizard on to it with no customization(I know, the database behind it still has that additional column),and I get the same error message.Are we not supposed to make any changes to aspnet_Membership ?
(Yes - I will eventually have to remove that column and see if that makes the problem go away,but I'm addressing a different problem with permissions with my database hosting service)
Dave
-----------------------------------------Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: INSERT failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations.Cannot insert the value NULL into column 'UserId', table 'DB2323_123.dbo.aspnet_Membership'; column does not allow nulls.INSERT fails.
The statement has been terminated.
Server Error in '/' Application.
INSERT failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations.
Cannot insert the value NULL into column 'UserId', table 'DB2323_123.dbo.aspnet_Membership'; column does not allow nulls.INSERT fails.
The statement has been terminated.
I have a website which displays news information. It displays the titles at the default (home) page and when click it shows the full story.
I use object datasource to load the news titles.
Now, sometimes the database server lose its connection or changes to the database and it affects the whole website because error is reported at the Application level. I would like the Home page to still show but the section where the news titles usually appears will now show an error message that the database is down (Refer below my part of my code).
How can I achieve that?? I tried to do that at the page_error level but it displays nothing. I don't want to pass the error to application level, I want to handle at datasource load/binding level so that it display this error message at the news section and other home website information can still be shown.
[Code]....
I am experimenting with the customization of the createuserwizard by creating textboxes for FirstName and Last Name. I have altered the web.config file to add the fields, but where does the actual data get stored? What C# code do I need to create, if any?
View 3 RepliesI thought I had this working, but right now I'm confused. When I try to cause an error by re-using an email, it gives me the success message, even though nothing is added.
This is my CreateUserWizard
<asp:CreateUserWizard ID="CreateUserWizard1" OnCreatedUser="CreateUserWizard1_CreatedUser"
I am using the register.aspx that came with VS2010 when I create a new website. When a user is created, the user is automatically logged and NOT send in a verification email. I thought I've modified that but it's not working. Here's what I have:
[Code]....
And here's the C# code:
[Code]....
I have a working registration page and I'm adding CAPTCHA. The CAPTCHA works and I have a simple if/else loop to do what happens if the CAPTCHA input was correct or incorrect.
if (Page.IsValid)
{
feedback.InnerHtml = "Correct.";
//I would like to put something here to process the registration -- CAPTCHA was done correctly
}
else
{
feedback.InnerHtml = "Incorrect.";
}
I want to write something in the if/else loop that will enact the registration.
Therefore, my button in CustomNavigationTemplate,
<CustomNavigationTemplate>
<asp:Button ID="StepNextButton" runat="server" CommandName="MoveNext"
Text="Create User" ValidationGroup="CreateUserWizard1" />
</CustomNavigationTemplate>
is obsolete.
Is there something I can type that will programmatically achieve what this button performed?
I have tried to use CreateUserWizard control inside Formview to avoid manual coding. CreateUserWizard control is a member of InsertItemTemplate of FormView control, I have bounded all the input controls inside CreateUserWizard to database fields but when I click on create user button I get following exception
SQLBindParameter not used for all parameters
after getting through some links I got to know that this may be beacause of mismatch between no of ? marks with specified insert paramters.
