Security :: Intended Page Not Being Displayed In Browser?
Jan 13, 2011
Rather than using ASP.NET's CreateUserWizard control, I want to use the code found on MSDN's "MembershipCreateStatus Enumeration" page (http://msdn.microsoft.com/en-us/library/system.web.security.membershipcreatestatus.aspx).However, I want to have a separate code-behind file. So I created the following two files:
Register2.aspx
[Code]....
Register2.aspx.cs
[Code]....
However, when I attempt to build and execute the Register2.aspx page, my Login.aspx page is displayed in the browser instead.
View 1 Replies
Similar Messages:
Apr 15, 2010
So I took over a companies site and are QA department noticed that after the site sets idle(30 minutes) they can still click around until it preforms a database function that is when it errors out. I thought I had the web.config set properly that the user would be logged out after 30 minutes, but they are still able to make clicks on a gridview and popup modal popups. The site uses membership and I have never had an issue in the past with the timeout on forms auth.
[Code]....
View 2 Replies
Oct 9, 2010
I have been working on this project for weeks. Every thing was fine. But all of sudden today, I got this error: Page cannot be displayed when I was trying to debug as usual.
I searched online for solution. Only one solution was found at [URL]. But when I followed its steps, I found in my hosts file, it is already like this: 127.0.0.1 localhost
I cannot continue to work without testing finished form pages.
View 5 Replies
May 3, 2010
Most of my pages use a master page. If I design the page completely in the Design View the controls display on the page properly, within their content placeholder space. But if I add the control programatically, its added outside the content placeholder area, which is to say, its basically added to the masterpage.
Im trying to programatically add a System.Web.UI.WebControls.Table to a page in the Page_Load event with the following statement:
Table table1 = new Table();
this.Controls.Add(table1);
Everytime I view the page, the table is showing up below the <asp:Content></asp:Content> elements where Master content should be displayed. Do I have to add the table to the Content Control on the Masterpage? And if so, what would that code statement look like.
View 3 Replies
Apr 14, 2010
I 'm implementing my version of "ShareThis" in my webpage.How can i get the client's browser displayed address with Asp.NET?I am little confused with this one since the url to share...1) is created with URL rewriting2) contains Greek characters.
View 2 Replies
Feb 9, 2010
i am experiencing some problem in visual studio as when i press f5 to run the solution of asp.net file which is displayed in browser,,it doesnot displays it...however the internal browser displays the output correctly... i have reinstalled the visual studio but the problem is still there...i have tried in internet explorer 8, mozilla fire fox, google chrome but no one browser is displaying the output except the internal browser. this problem occured to me suddenly..some days before every thing was working fine.... now i am posting my problem here,may b anyone of you could help me to get rid out of it.
View 2 Replies
Nov 29, 2010
I'm running an ASP.NET ver 4.0 website on Windows Server 2003. Everything was working fine, until I uploaded a new version of the site tonight.I have a new version of the website on my local box, with so many changes that I decided to remove all the existing files on the live site, with the exception of the web.config.Then I uploaded all new files (except the local version of my web.config) from my local box to the live site.
Afterward, when I browsed to the site and tried to use the standard Account/Login.aspx page, all my server code in the code-behind file was displayed in the browser!What would cause this? It *seems* like that would be a server-configured issue, but after I rolled the website back to the old files, everything worked again!
View 2 Replies
Aug 24, 2012
i have created a website whose product images are coming from database it is working properly in IE, Firefox but not displaying images in Chrome.
[URL]
View 1 Replies
Mar 23, 2010
I am using VWD 2010 beta 2 and Ajax toolkit 3.031106, the problem is mainly the calendar extender.I have the controls in my new tab but cant drag the calendar extender (just get the crossed black circle cursor). Some control I can drag down other not and none of them shows when I look at the page in my browser.there are no errors displayed at all.
View 13 Replies
Jul 26, 2010
I installed my asp.net application on server (Windows Server 2003, Standard Edition, SP2)
I already set:
1. In ASP.NET Configuration Setting: I set Authentication to None.
2. Check Enable anonymmous access.
3. Uncheck Integrated Windows Authentication.
But the brower always show Authentication Required Dialog.
If I ignore this.
It show this error:
Access is denied.
Description:
An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL.
Error message 401.2.: Unauthorized: Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authentication methods enabled on the Web server. Contact the Web server's administrator for additional assistance.
View 1 Replies
Sep 19, 2013
I have followed all the steps in the link [URL] and all the functions are working except that the flash player is not getting displayed in the gridview and hence i am not able to play.
View 1 Replies
Oct 20, 2010
I'm trying to set up the SSL in my web app, but don't know if i'm doing it right, or if even i'm taking the right steps in the right order.I have a function in a class that returns the secure URL (https://mydomain.com/...aspx) if the current url is not secure (http)
[Code]....
(Though in develop environment It's like "https://localhost:port" + rawUrl)
when the function returns ssl value, if it's not empty, then the master page redirects to the new url... but the browser is not showing it...
View 5 Replies
Sep 16, 2010
is this c# code intended to read local client files?System.IO.FileStream content = System.IO.File.Open("c: est.txt", System.IO.FileMode.Open);It gives me error FILE NOT FOUND
View 2 Replies
Dec 29, 2010
I am trying to build a form in asp.net 1.1, the problem I am facing is when I run the page on http everything works fine, but on https it submits the page with out any validation on client side. The page supposed to validate fields which it does on http but not https.
Page works in all other browsers. FF,chrome,safari,ie6, ie7, the problem is only in IE8 and only when the page moves to https.
Using windows server 2003 on IIS v6.0.
View 1 Replies
Jan 10, 2011
I have a page that is based on my master page. the code below
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="CaseAdmin.aspx.cs" Inherits="Prototype4.CaseAdmin" %>
<%@PreviousPageType VirtualPath="~/Account/Login.aspx"%>[code]....
when the page above loads, i have link buttons on the left and an empty maincontent area next to its right. what i want to do is display an entry form in the main content on click event of the link button on the left. the second form is as below.(form not based on master page).
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="OpenCase.aspx.cs" Inherits="Prototype4.EntryForms.OpenCase" %>
<%@PreviousPageType VirtualPath="~/CaseAdmin.aspx" %>[code]....
how do i perform this task and if i wanted to display a different form in place of the first one that appeared in the maincontent area, how do i go about it?
View 2 Replies
Apr 27, 2010
I'm using ASP.NET 3.5I have created a Master Page. The master page is simple. It has a table at the top which has the colors and rows and columns and text that I need on each web page that gets displayed. Beneath the table I have a ContentPlaceHolder. The master page works as it's supposed too for each web page that gets displayed.My question is that I have this header at the top and then the ContentPlaceHolder, but how do I add a Footer to the Master Page? The footer naturally needs to be at the bootom of the Master Page!How do you add a footer and make it remain after the ContentPlaceHolder at the bootom of the Master Page?
View 4 Replies
Jul 1, 2010
I've got a Varchar2 field in my table which I want to convert to a CLOB. I am unsure whether the data would get truncated when selected. If so, what is the limit and does it depend on the database settings?
In my TOAD or SQLPLUS window it gets truncated but this may just be the environment settings. I'm not sure whether it would get truncated in my actual application (I can test this, but up to what size should I test?)
If it does get truncated, what's the best way to display the whole CLOB? There are other fields in my SELECT query, so I think I can't just loop through multiple rows. Is there any way out?
View 2 Replies
Nov 25, 2010
I'm trying to display a string on my content page which is set in the master page but i'm getting the error message: 'compid' is not a member of 'ASP.test_master'
Here's my master page code:
<%@ Master Language="VB" debug="true" %>
<script runat="server">
Dim compid As String = "test" [code]....
And my content page code:
<%@ Page Language="VB" MasterPageFile="test.master" %>
<%@ MasterType virtualpath="~/test.master" %>
<asp:Content ContentPlaceHolderId="CPHLoginButton" runat="server"> [code]...
View 2 Replies
Nov 4, 2010
In my company website previously working fine.after login page the user click menu,the new page will open.after opening the user enter the some values in textbox nearly 15 values after that user click the submit button on that time the page is sending records to database after 10 seconds page cannot be displayed message appeared in internet explorer.For information:on the submit button click(1)15 records insert in to sql server database (insert query)(2)after inserting select query will run(3)after select query the from the sql server selected records will goes to mailon that time the mail user name ,password also take from sql server database for sending mail(4)mail sending process going(5)the above process are running user click the submit buttonThe asp.net website working previously fine.now one week are problemwhat i do ,any one please help to solve this issue.
View 2 Replies
Aug 23, 2010
We have a asp.net application that has this report that shows about 1000 rows as of right now and can grow up potentially up to 20,000. Dont ask me why, but out client does not like paging and does not like filtering, they like to see everything on a single page. Our obvious problem is the load its putting on the server, in terms of memory (also the factor that the client browser may crash as well).
My question is: If I provide a custom desktop application only for this report, that can display thousands and thousands of rows (through web services or remotting), would it clog up the server? On the server the worker process of the IIS basically eats up memory in case of a the asp.net application, but if I have this desktop app running seperating calling the same data base on the application server,
View 4 Replies
Jan 26, 2011
We have an old windows 2000 running IIS 5.0 on this server we have a few asp pages that use a connection to our SQL database.
This all works fine. But because we are going to deposal this server it has to move to a newer server running IIS 6.0.
I installed IIS and ASP and it looked ok, after that we moved over the webpages to the new server edited the web.config connecting to the new SQL database 2008 ( that's also moved )
But what I try I keep getting the same error, Page cannot be displayed.
View 3 Replies
Mar 18, 2011
I have a gridview with a pager. The pager displays blocks of 10 page numbers (1...10, 11...20 etc.).
What I'm trying to achieve is that when the user clicks on a page number, the numbers in the pager will re-align so that the selected page will be in the middle of the list. For example: If a user selects page 10, the numbers in the pager will be:
6 7 8 9 10 11 12 13 14 15
Currently, it displays:
1 2 3 4 5 6 7 8 9 10 ...
And the only way for the user to reach page 11 is to click on the 3 dots (...).
View 1 Replies
Jul 31, 2013
I am new in ASP.net and working with 4.0 framework. My problem is that when i paste all page with directory into local iis configured directory inetputwwwroot , and try to run it with
browser http://localhost/webpage1/default.aspx/
it gives an error message
"The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'file:///C:/inetpub/wwwroot/WebSite3/Default.aspx'....
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %> -^"
View 1 Replies
Apr 14, 2010
is it possible to export displayed content of asp.net page to pdf.if yes how
View 5 Replies
Feb 5, 2011
I just installed IIS and .net on my machine. I am trying to run basic default.aspx. I keep getting error:
HTTP Error 405.0 - Method Not Allowed
The page you are looking for cannot be displayed because an invalid method (HTTP verb) is being used.
Module
StaticFileModule
Notification
ExecuteRequestHandler
Handler
StaticFile
Error Code
0x80070001
Requested [URL]
Physical Path
C:inetpubwwwrootKobeTestDefault.aspx
Logon Method
Anonymous
Logon User
Anonymous
View 5 Replies
