We're running ASP.Net applicationon the server running Win2k AdvancedServer. Everytime server is rebooted the ASPNET account gets locked, even after unlocking the account, after few mins the account gets into locked mode.
View 7 Repliesuser phoned me and said he received an error when attempting to login stating that his account had been locked. I had to unlock the user account today manually through the user interface. Several hours later I had to do it again. Afterwards, when I looked at the aspnet_Membership table it showed NO failed login attempts. LastLockout date for that particular user was set to min date. FailedPasswardAttemptCount was zero. FailedPasswordAttemptWindowStart was min date. I then proceeded to fail logging with the users account name.
View 3 RepliesI am facing such problem in my asp.net application since last three weeks.Previously It was working fine. I have never changed the account password which is using in impersonation in asp.net application (in web.config). this account locked why I dont know. Is it possible the run application with impersonation account while this account is locked. This account is domain account. Currently application gives run time error that account has been locked.
View 1 RepliesHere in my work I have four guys managing AD server(2003), and one of this guys, locked an workstation account. I would like to know if there are a way to find out who did this.
View 1 Repliesi have an asp.net application that connects to a database. I've set up the connection string with the correct server name and username/password. This use to work perfectly. Suddenly for some reason, when i navigate to the site i get a Login failed for user
admin. Account locked. I check the server and the account is not locked, but just to be sure i reset the password and change my conn string accordingly. This makes no difference and i still get the account locked error message.
I wand to download the files in Windows server 2003. For that the ASP.Net application needs access control to the directory. I searched the ASP.NET Account. But I cannot find. How Can i find or add?IF I try to add the ASPNET account using User Accounts panel. I cannot open the localusers It says an error "the computer is a domain controller. This snap-in cannot be used on a domail controller. Domain accounts are managed with active directory users and computers snap-in"
View 2 Repliesconsider this, If one is user of a Web applicationlike : A someone visits SomeWebSite.com as a normal User (registered)
HttpCookie cookie = new HttpCookie("LastVisit");
cookie.Value = DateTime.Now.ToString();
cookie.Expires = DateTime.Now.AddDays(1);
[code]...
I am using gmail for sending email in my asp.net application. Email works fine if I send email on server but if I try to send emails on local machine it give error. I placed break poin in code and when send method is called it shows error box with heading "Smtp exception was unhandled by user code" and in detail it says "Faliur sending mail". If I continued on browser it shows error page with these details:
An existing connection was forcibly closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
protected void btnConfirm_Click(object sender, EventArgs e)
{
string _Message = GetAdminEmailMessage();
MailMessage message = new MailMessage();
SmtpClient smtp = new SmtpClient();
NetworkCredential mailAuthentication = new NetworkCredential("myaccount@gmail.com", "mypassword");
message.To.Add(new MailAddress("mc5678@hotmail.com"));
message.From = new MailAddress("myaccount@gmail.com");
message.IsBodyHtml = true;
message.Subject = "Local test email";
message.Body = _Message;
smtp.UseDefaultCredentials = false;
smtp.EnableSsl = true;
smtp.Port = 587;
smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.Host = "smtp.gmail.com";
smtp.Credentials = mailAuthentication;
smtp.Send(message);
}
Using IIS 7.5, IIS_IUSRS is supposed to be the account to use. I get '401 - Unauthorized: Access is denied due to invalid credentials' error. If I add an EVERYONE account with Read, it works. But rather not have Everyone account. Any idea why IIS_IUSRS does not work? It has Read access. Anonymous Access=enabled. Specific User=IUSR As a side, on the Basic Settings... for the site, Test Settings button says 'ok-on Authenticate' but Authorization 'cannot verify access to path'.
View 1 RepliesWhat is the best way when using the ASP login to display to the user that they are locked out?I want the user to know that their account has been locked and action needs to be taken.
View 2 RepliesI'm using VS2010 and need to give my remote server asp .net account (IUSR_istereos) access to my local intpub folder
how do I do that?
the directoryentry object with wrong password locks the user account and not able to log in again.
View 2 RepliesI'm using the built-in membership in my ASP.NET Web Forms 4 app.
I'm also using the PasswordRecovery control for handling users who have forgotten their passwords. Before I reinvent the wheel, I've decided to post this question.
As one can imagine, in most cases, people give it a few tries before requesting a password change. Of course in the process, they lock out their accounts. The problem is that password recovery does not work for locked out accounts.
How do I first unlock the account if I'm using PasswordRecovery control?
No connection could be made because the target machine actively refused it 127.0.0.1:51273 when the project deploy in IIS. But it is fine running the project in localhost. How to fix the error?
View 1 Replies I am getting an error saying "ASPNET account is not present in this machine" when I try to install Sitecore on my machine after I installed visual studio 2008..
- My machine is running on windows XP sevice pack 3
- I installed Visual Studio 2008 and .NET framework version 3.5 SP1 on that machine
- I can see that ASPNET User group account Under Users and Groups and it doesn't have "Account is locked out" ticked under general tab
- Also I ran aspnet_regiis -i many times but didn't help; actually I red in one post that I should delete ASPNeT account first and run the script but still didn't help
- when I view http://localhost on IE I can view the ASP home page without any problem but Firefox asks me to enter user name and password.
Consider the following senario:
1. User sets the records of a gridview to edit mode; that locks all the records of the gridview.
2. Then either session expires or closes the application or browser.
3. All records of the gridview are now locked.
How can we give warning to user or unlock the records.
I want to make a User login Form, in which account get lock if number of attempts gets exceed by three.
How can i implement the locking and unlocking strategy in login page?
Is it possible to SUSPEND a user account? I want to do an application in which the admin retrieves a list of all the user accounts in the database, and select a particular one to suspend it. And, that suspended account would not be able to log in to the application?
View 4 RepliesI have used membership provider to implement my system. The system administrator can list the users. What I want to do is, administrator should be able to sign-in as the selected user. I can sign out administrator by FormsAuthentication.Signout but how can I sign in as the selected user? Passwords are hashed so I can not retrieve the passwords.
View 5 RepliesI'm using membership provider (SQL) in my application. How do I set to de-activate user account automatically after a period not being used by the users?
View 4 RepliesI am trying to build a login page as follows.On the machine on which i want to host the application i have a windows administrators group in which some windows domain users are.Now on building the login page i only want those people to access the application on login. What is the best way to acomplish this.
View 1 RepliesI have a web application. This application needs to perform a search on folders located on 2 different machines. I can use impersonation for this. But -
a. I don't want to use network service account
b. I want to impersonate just the search part of the code.
c. Specifying encrypted user name / password in web.config is one option. But this would be the last option.
Can I use a custom service account for the application pool for this? If yes, then how to impersonate a specific part of code using this?
We have a website that calls a utility from the command line to create thumbnails places them in a directory and then the page will display the contents of this folder to the user.The utility seems to only work when we run the application pool under an administrative account, we have tried the network service, local system, and local service all to no avail.Just wondered if anyone had an opinion on how secure/unsecure it would be if we ran the website under the administrative machine account? Does this open up a massive secuurity hole etc is it that likely that we are comprimising the network.
View 3 RepliesI face this problem when my client setting the LAN like this: the database server is in server A, the web application is in server B, and the windows login server control (is it what we call "windows domain"?) is in server C.
When I use windows authentication in the web application I built, it checked only the windows account in server B. How to authenticate with server C's windows account?
I am trying to send e-mail after an account with roles has been created, but I keep getting this error:
CS0123: No overload for 'RegisterUserWithRoles_CreatedUser' matches delegate 'System.EventHandler'.
This is the wizard I am using:
<asp:CreateUserWizard ID="RegisterUserWithRoles" runat="server"
ContinueDestinationPageUrl="~/Default.aspx"
onactivestepchanged="RegisterUserWithRoles_ActiveStepChanged"
LoginCreatedUser="False" oncreateduser="RegisterUserWithRoles_CreatedUser">
<MailDefinition BodyFileName="~/AccountCreated.htm"
From="myemail@gmail.com" IsBodyHtml="True"
Subject="Your account has been created!">
</MailDefinition>
<WizardSteps>
<asp:CreateUserWizardStep ID="CreateUserWizardStep1" runat="server">
</asp:CreateUserWizardStep>
<asp:WizardStep ID="SpecifyRolesStep" runat="server" StepType="Step"
Title="Specify Roles" AllowReturn="False">
<asp:CheckBoxList ID="RoleList" runat="server">
</asp:CheckBoxList>
</asp:WizardStep>
<asp:CompleteWizardStep ID="CompleteWizardStep1" runat="server">
</asp:CompleteWizardStep>
</WizardSteps>
</asp:CreateUserWizard>
This is the c# file:
protected void RegisterUserWithRoles_CreatedUser(object sender, System.Web.UI.WebControls.MailMessageEventArgs e)