I develop one application that create folder with special permission.
It works, but when I install the application on server I can't set any permission.
I think because it needs domain admin to set this permission... I've one account of one domain admin but how can I do to impersonate when the application set (try to set...) the permission ?
I want to create and write file in "C:windowssystem32" this path.some computer give the error access denied.i want some code in C# who give the permission to folder.
View 5 RepliesI have created a folder in DotNetNuke programmatically on the root portal directory. I just want to assign permissions to it only one time, for example I want to make it read only for authenticated users. Any advice on how to accomplish this using C# or VB.NEt?
View 1 Repliesi have a situation where i need to develop a web system where sys. admin can create a shared folder in server and set who can access the shared folder programmatically.
i've manage to find example to create a shared folder from here:[URL]
and i also manage to find example to add user and set folder Security setting from here:[URL]
My problem is how can i add user in the Sharing permission setting since it is a shared folder. Default sharing setting is set to 'everyone'. This mean anyone in my company can browse to the shared file unless i set everyone security setting. I want to remove "everyone" and add users based on the user that i've already add at Security setting.
I need to set folder permission programmaticcaly which is in my GoDaddy server. I have nearly 150 folders in my server so I cant change through server settings or IIS settings. I am using web application. My folder may go on increase in future.I have googled a lot of things.
1. Like Access Control List in System.SEcurity namespace
2.System.principl.security...
I cant able to change the file permission but not a directory.
I must allow all the users to write or move a file to the folder which is in read only mode. That should be done programmatically and should be dynamic.
I have a very simple and stupid problem but I'm unable to find a solution. I'm trying to create folders and files locally through my code, however I get a permission exception when I try to write in a folder in my application. Normally I'd run this on a remote server, and ask the system administrator for writing permission on this specific folder, but I need to run this locally for the moment.
If I navigate to the file in windows explorer, and right click the folder and click on Properties, I can see that it's set as Read Only. However when I try to disable this tickbox and click on Accept, nothing happens. It ignores me, and next time I open the Properties of this same folder, it's still marked as Read Only.
I've googled this and found a solution which implies using MS-DOS and a command named "attrib". This is not working for me either. I also read about adding an ASP.NET account on my PC and granting the right permissions to this, but I'm not sure how to do is.
I need the settings in web.config file of my asp.net application through which i can set permission for particular folder outside IIS. I need this functionality through settings in web.config.
Edited: I need to know that how can we apply impersonation in web.config file
I want to upload files in my Asp.net application on server but I have to grant it R/W access so that I or anyone can upload files in it. Is there any way that I write some code or configuration lines in Web.config which solve this permission problem?
View 1 RepliesI have deployed my website in ftp server.now i need to upload image to my database and place images in upload folder. while uploading images i'm getting the below error.
Access to the path 'd:hostingmystieproductImagesvaara.jpg' is denied.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.UnauthorizedAccessException: Access to the path 'd:hostingmysiteproductImagesvaara.jpg' is denied.
ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user.
To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.
I have a production website that, once built in TFS is re-deployed and updated using xcopy. The entire site (excluding the root directory) it deleted then the new site copied in. This works well.
We use a 3rd party charting package that creates images at runtime and then renders a link to them. In order to do this it needs write permissions to a browsable folder.
Unfortunately, every time we update the website the write permissions of IIS_USRS is lost. Is there any way to retain this?
I set all the permissions correctly (I think), but I still can't upload file on the server. I am receiving error that access is denied when I am trying to upload the file.
I set the permissions to be able to write for Internet guest, network service and asp.net in both physical folder and in the iis.
How can I give my ASP.net website permission to see this folder on the server? C:PVSWin. The website is actually running on a virtual path D:WebSitesAdco.We are running IIS ver 6.The website uses a table from Pervasive to locate Vendors. The SqlDataSource works from the VS2008 IDE which is running on the server, but if a user logs into the website remotely they get this error:ERROR [IM003] Specified driver could not be loaded due to system error 1114 (Pervasive ODBC Client Interface). This error generally indicates that the path to the DB components is not found, or is not available to the calling program, so I guess that the website does not have permissions.
View 5 RepliesI have an asp.net application. There is a folder in the project that users upload images and files to that folder.
I want to restrict users, that each user sees only his files. How can I do this?
Because files are uploaded in folder, users may access them by browsing file urls.
I am creating one folder like "ManageFiles" dynamically. and that time i am storing some files inside that folder.If i want to download files from that folder for some user, I am getting error.
View 1 Replieshw can i give write permission to folder for changing the image at runtime.i have tried so many times but still confused and free hand. can some one pls give me the solution in details.
View 4 Repliesi need some lessons in how to create admin folder and pages to add user ,content ,authentication, etc
View 2 RepliesI am having problems getting the security.aspx to load up on my primary development computer which is using Windows 7 Ultimate and Windows IE 8. Clicking on the ASP.NET Configuration icon from the IDE in the Solution Explorer within Visual Web Developer 2008 Express Edition loads up default.aspx with no problem. But when I click on the "Security" hyperlink to access "security.aspx" I get a message along the lines of "The configured SQL data source provider is not properly configured". It goes on to state a list of potential reasons for this problem. One that includes not having the proper credentials or permissions. Im almost 100% sure it has something to do with permissions because I can't even get to the "security.aspx" page from opening a new empty project. I have recently installed Visual Web Developer 2008 Express Edition on my laptop which is running Vista with all latest updates and this issue does "not" exists. I can click the "ASP.NET" icon, load up "default.aspx" and click "Security" and it loads the page with absolutely no issues.
I have discovered a weird workaround but I don't like having to do this. If I add the following lines to my "web.config" file from any given project I can get to the "security.aspx" page without getting any SQL messages about improper configuration or permissions.
<<remove "LocalSqlServer">
<add
name="LocalSqlServer"
connectionString="data
source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient"/>
Basically, what I have to do to get to the security page to load without error is add a remove statement and then I just cut'n'paste almost the exact same connectionString from machine.config in the Microsoft.netFrameWorkV2.0.5027config directory. This does away with the "Improperly configured SQL datasource message" and gets me a new error message along the lines of "Could not create a SQL instance". My memory is fuzzy on exact error messages since Im not at development computer right now. However, when I change the User Instance attribute from true to false, then I have success at last.
I am using Itext sharp to create a pdf. I am adding an image and I keep getting this error
Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, ersion=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
it is this bit of code that is causing this
[Code]....
If i comment this out, the PDF builds and no errors are thrown (there is just no image)
I don't understand cause I am am trying to do is read a file.
Don't get me wrong, I don't want anyone to write code for me, I just want to know what I'll need to implement. I'll detail what I need: Ex: Facebook page. If I'm at my profile's page I have one type of view, I can edit all my data, see even not set data and add more information. If I'm visiting a friend's page I can only see what he wants me to and interact with his pages as far as he allowed me.
Ex2: One user posted info on some blog. He and all the people with privileges can edit that info, the other can only read and post comments as their permissions allow. Was I clear enough? I wasn't able to find Google references because I don't know the name of this technique and the keywords I typed didn't take me anywhere.
I am working on asp.net 3.5 in C#. In my application I have to Create folder and upload file in that folder, which works fine on my machine. I want help for create folder and upload file in that folder on other machine which is connected in LAN. code for create folder and Upload file on my machine
string FileName = FileUpload1.FileName;
Here is my code
[Code]....
"fileUpload" is the FileUpload ASP.NET control. The SaveAs method writes the user uploaded file to a specified location on the server. IT WORKS. That tells me that the ASP.NET process has the proper write permission to write to the file.The next line uses an assembly called PdfSharp which you can use to open PDF files and manipulate them. In this case, the line simply opens up the user uploaded file. That is where the error occurs. WTH?
It works on my production machine. It does not work on my local machine. It USED TO. It was never a problem before.So why would it be fine to WRITE to the server, but trying to open a file give an error? Makes no sense. Googling yields a suggestion to put <trust level="Full" originUrl="" /> under <system.web> in web.config. It does not work.
I need to create different page views for different types of users. I already asked that here: How to create pages with different permissions' views And even though Aldeel's answer works, it does not seem the best solution for me. I'll explain why. I need to show different views but it's not only like that. Each user can have access to different parts of the page.
Imagine a page 'X' with this structure
Field A
Field B
Field C
Field D
When user U1 from group G1 visit page X the system checks the DB for that group's permission on page X. User U1 can see Field A and Field B, but only edit Field A. User U2 that is set to no group visits page X. The system checks for his permissions on page X. User U2 can see and edit all fields. When user U3 from group G2 visit page X the system checks the DB for that group's permission on page X. User U3 can see Field C and Field D, but can not edit any.
I coudn't find a way to do that instead of filling ViewData with lots of data about that specific user's permission. In my example there are only 4 fields, but in my current project I have no screen with less than 20 fields. So I guess you can see how ugly and not productive that is. The idea is similar to a social network, as I said (facebook example). When a user visiting UserX's page can only see what UserX has allowed him to.
I have a web application with a textbox and a button. When i click the button with a folder name in textbox a .xml file should be created in C: folder getting all the data from a method which retrives data from DAL. But clicking on button gives the error of access denied. I dont have sufficient permission. But when i run visual studio as administrator, this permission error does not occur, instead some other error i get. How can i get this permission to run this application?
View 3 RepliesIf I want my button to go to another page instead of going to its own page, I can set the PostBackUrl to destination page.Howevery, I read in microsoft website that Server.Transfer is not good if you are concern with security and permission.Is PostBackUrl the same with Server.Transfer?Does the user will not be authenticated again in the new page?
View 6 Repliesi am mohammed working on website development,as i am having user,admin and employeeif the user enters the page he should see all the user pages,if admin he should see all the pages,if employee only specfic pagesso can i know where exactly i have to give the permissions in to login page,so dat when emplooyee loggs in he will be seeing only his pages,can any one let me know the code,as i am developing site in vb.net,its
PartialClass Users_login
Inherits System.Web.UI.Page
Protected
[code]...