State Management :: Losing Session State In Global.asax File?
Feb 2, 2011
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
View 9 Replies
Similar Messages:
Jan 4, 2011
how can I implement a Global Session in my ASP.NET 3.5 website in C# using Global.asax file ?
View 18 Replies
Mar 20, 2010
how to get sessions in the global.asax, but I still cant get it to work...for some reason my session throws NullExceptions..the sessions are set from another page add looks something like:
[Code]....
And once I try to get those session values I do the following in the Global.asax:
[Code]....
But as I said, for some reason I get a NullException once I try to get the values...and they do have the same session-name,so they shouldn't be null..
View 6 Replies
Dec 20, 2010
i dont know about Global.asax so give some information about it and also tell me about the implementation and use of session_start and session_end event. How to call Global.asax in our website.
View 5 Replies
Apr 6, 2010
When i start the application, based on some condition in global.asax page,i wil redirect to login page.If i click the logout button,
there i vil be clear all session value. here i want to initiate new session value like Session["InitialLogin"]="Yes".
How can i get this value in global .asax page. If get that session value [i.e Session["InitialLogin"]="Yes"], i vil redirect to some other page.
I cant able to get session value in global.asax page.i always getting null value.
View 7 Replies
Sep 14, 2010
I added the following code to global.asax to load up several session variable when a session starts. I'm assuming that when a page goes to use the variable that I should be
1) checking at the page level that the value is valid not 0 when its not expected to be 0, not a zero-length string when its expected to have a length
2) have code at the page level that sets the values if the values have not been set as when the Session timeout, ideally putting the code in a class derived from Page and then deriving all of my pages from the new class so that the code does not have to be repeated in every page
[Code]....
View 7 Replies
Sep 3, 2010
I have a custom class that pulls user information from a SQL Server table. Now that I'm expanding the site from a single page to others. I want to shift the code to the Session_Start event so that the information is always loaded when the site is accessed. How do I call my custom code from global.asax since its script and not a class.
View 5 Replies
Jul 26, 2010
I want to insitate a class instance in the session start of the application. code below
if (Session["user"] != null)
Session["user"] = new user();
I have created the "user" class as a separte dll and referenced and imported the namespace.But still i get 'are u missing assembly reference' it is not problem in 1.1 but seems has a problem in 2.0
View 2 Replies
Feb 5, 2010
Can I set the connection string for custom session state mode in global.asax file? I cannot hard code the connection string in the webconfig file. ,I will get the connection string at runtime,Can i set the connection string for custom sessionmode/sqlserver session mode in the global.asax file(like in application statrevent, or aquirerequeststate event.If YES How to do that?
View 1 Replies
Nov 11, 2010
i'm using asp.net 2.0.
there's a way to add an handler to manage the session_end event without using the global.asax?
(i can't modify my httpapplication code so i need to add the handler externally to it)
View 2 Replies
Oct 6, 2010
I have a simple aspx Page, which html contains:
[Code]....
and code behind:
[Code]....
This is quite simple. When I press btn1, it sets correctly the Session Key. And this is then the issue arrives: When I press one of these buttons, this is the sequence of what happens:
Global.asax: Session_Start
MyPage.aspx: Page_Load » btnX_Click
So, everytime there is a PostBack, even before the Page loads, the session starts and generates a new Id. This way, I loose everything during the PostBack. My Session State configuration:
[Code]....
This is running on VS 2010 + V3.5, on IIS5.1. The Page header configuration is default.
View 6 Replies
Dec 1, 2010
Suppose my website address is like http://localhost/MyWebsite
I wanted to access this url in Application_start event in global.asax, Can i some how get it?
[I know i can get it via application_beginrequest or other event]
View 17 Replies
May 23, 2010
What is the difference between the 2? Ex:
Private Sub Globals_BeginRequest(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.BeginRequest
vs
Protected Sub Application_BeginRequest(ByVal sender As Object, ByVal e As EventArgs)
View 3 Replies
May 10, 2010
I have a asp.net application where I am saving off into session the user privilege information. From a grid I am bring up a new window by using the window.open. It seems that it is whiping out the values in session. A temporary bandaid I have placed on it is to recall the database if the value is nothing to reset the user object. I have found all over the internet that this is an issue with the window.open in IE 7 and IE 8. Has anyone else run into this and able to actually fix it?
View 4 Replies
Mar 14, 2011
There are a couple of user's experiences session variable loss after they've clicked a confirm button and their information is email via a relay hosting server. Below, I commented exactly where the session variables get lost.
What could be causing the session variable loss? So far, this only happens to a few users.
Part of the email that gets sent out:
[Code]....
Web config file:
[Code]....
View 4 Replies
Oct 25, 2010
This is weird. In my newly developed chat application, when I invoke Response.Redirect, I am losing my session data. What is particualrly odd is that this sometimes seems to occur after a slight delay, so I reach the page, and then the session info gets lost momentarily thereafter. Mostly though it seems to get lost immediately. I have of course googled this issue, but yet to find anything that speaks to my problem. SessionState is in InProc mode. Session state has been working fine for me until this unexpected problem, so everything is configured right. So far the only workaround I can think of is to use a link instead of a button, and use javascript to call a server-side function on onclick to do the work I need to do before the link gets invoked. Messy, and I'd rather not go that way unless there's no alternative.
Just to preempt one red herring, I do use Response.Redirect(<address>, false).
The problem occurs both on the testing and production servers. I'm running ASP.NET 3.5 on IIS7.
View 1 Replies
Sep 21, 2010
I have been trying unsuccessfully to retrieve a Session varaible from within an ASHX file that i'm using to build an XML file.
What I am trying to achieve is quite simple really.My ASHX file is used to dynamically build an XML file so that I can then bind it to a TreeView control later on. However the dynamic part isn't quite working because the ID that I need from the session seems to not be passed into the ASHX file.
I have tried using the following methods to do this:
1) Include interfaces IRequiresSessionState and IReadOnlySessionState
2) Tried accessing the value like this: Session["ID"] or context.Session["ID"] or HttpContext.Current.Session["ID"]
I am setting the Session variable in the MasterPage's code behind.
View 1 Replies
May 11, 2010
I tried to set the session state in my webconfig file and got this error.. <sessionState timeout = "60"/>
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
However if I tried to set it in anther aspx page it seems fine...is there a reason for setting up the virtual directory as an app in IIS ..what are the benefits of doing this, and is it always necessary?
View 5 Replies
May 13, 2010
I have two radio button list:
*1* report views -- 4 options -- NOT in updatepanel
*2* pagination views -- 2 options -- IS in updatepanel
The situation goes as follows: Refresh WORKS in default setting but when I select *2* radio button options and refresh the page renders the state that the (1) was entered in.
Example: () are the radio buttons
Report Viewing: () (x) () () Pagination View: (x) () REFRESH works!
Report Viewing: () (x) () () Pagination View: () (x) REFRESH fails to display Report Viewing: () (x) () () Pagination View: (x) ()
Report Viewing: () (x) () () Pagination View: (x) () REFRESH works!
OR: () are the radio buttons
Report Viewing: () () (x) () Pagination View: () (x) REFRESH works
Report Viewing: () () (x) () Pagination View: (x) () REFRESH fails to display Report Viewing: () (x) () () Pagination View: () (x)
Report Viewing: () () (x) () Pagination View: () (x) REFRESH works
I am using the session variable to hold the Pagination Viewing option but during page states, I've noticed that when a 2nd option is selected of *2* radio buttons (doesn't matter of 1st or 2nd option was initially selected) that during debugging mode the step over corrects the issue but not the right table viewing. Upon entering Page_Init selection selection index of radio button list returns to 1st option.
View 4 Replies
May 21, 2010
I want to use something better thatn using the session to store global values, because it has somw problems
View 4 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Nov 18, 2010
I read the solutioin for this error, at the following link :http://forums.asp.net/p/1046935/1576341.aspxbut I am still not clear what exactly causes the error. I have two doubts :1. Can anyone please elaborate a bit on this issue, with any example ????2. Is there any drawback of this approach ?
View 4 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
