State Management :: Session State In ASHX File?
Sep 21, 2010
I have been trying unsuccessfully to retrieve a Session varaible from within an ASHX file that i'm using to build an XML file.
What I am trying to achieve is quite simple really.My ASHX file is used to dynamically build an XML file so that I can then bind it to a TreeView control later on. However the dynamic part isn't quite working because the ID that I need from the session seems to not be passed into the ASHX file.
I have tried using the following methods to do this:
1) Include interfaces IRequiresSessionState and IReadOnlySessionState
2) Tried accessing the value like this: Session["ID"] or context.Session["ID"] or HttpContext.Current.Session["ID"]
I am setting the Session variable in the MasterPage's code behind.
View 1 Replies
Similar Messages:
Feb 2, 2011
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
View 9 Replies
May 11, 2010
I tried to set the session state in my webconfig file and got this error.. <sessionState timeout = "60"/>
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
However if I tried to set it in anther aspx page it seems fine...is there a reason for setting up the virtual directory as an app in IIS ..what are the benefits of doing this, and is it always necessary?
View 5 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Nov 18, 2010
I read the solutioin for this error, at the following link :http://forums.asp.net/p/1046935/1576341.aspxbut I am still not clear what exactly causes the error. I have two doubts :1. Can anyone please elaborate a bit on this issue, with any example ????2. Is there any drawback of this approach ?
View 4 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
Jan 21, 2011
I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
View 2 Replies
Nov 1, 2010
All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
View 8 Replies
Apr 29, 2010
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
View 7 Replies
Oct 27, 2010
The fix for this error message is to run [Code]..... I have run that uptown, downtown and in my lady's chamber and it does no good, although it never complains. Are there any other possibilities?Details:
IIS Server: v5.1 running on XP. SQLServer 2005 running on a different XP box.Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618 There is an ASPState database on the server, containing only two tables: [Code].... and [Code]..... I did not use [Code].... when I ran [Code]....
.
View 2 Replies
Dec 3, 2010
I am building a web app that is limited to one database, therefore I cannot use the ASP.NET config tool. As a quick means of getting this app online, I tried to use a simple session variable. The login page verifies the user's credentials, and if they pass, it sets the session variable to a certain value. All other pages check in the page_load event whether or not the session variable is equal to that value. The problem is that once being logged in for a short while and sending and recieving some data, the session variable resets, and I'm returned to the login page to repeat the process. Here's the basic code from my webforms:
[code]....
Is there some setting I need to change in the web.config file to adjust the cookie timeout or is that only for the config tool authentication methods?
View 5 Replies
Feb 13, 2011
Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 Replies
Mar 16, 2011
I write a simple web site in asp.net. In one page i want to delete a folder of web root. When i delete it folder, the all session in project is changed to null. I write a post in this forum. Here is the adress of it post: ([URL]) Some pepole answer me to change the session state mode to StateServer. In default the session state mode is Inproc, and i changed the session state mode to stateServer.but when i changed the session to stateserver this error is appear in application eventlog after two day and my web site dont working in iis. This error is like this:
Event Type:
Warning
Event Source:
ASP.NET 2.0.50727.0
Event Category:
Web Event
Event ID:
1310
Date:
3/12/2011
Time:
1:27:55 PM
User:
N/A
Computer:
WIN2003-00A346F
Description:
Event code: 3009
Event message: Unable to make the session state request to the session state server. Details: last phase='Sending request to the state
server', error code=0x80072749, size of outgoing data=0
Event time: 3/12/2011 1:27:55 PM
Event time (UTC): 3/12/2011 8:57:55 AM
Event ID: a5c8bfd16f74429e820989e8ce8082d0
Event sequence: 10
Event occurrence: 1
Event detail code: 50016
Application information:
Application domain: /LM/W3SVC/1547208020/Root-1-129443938731955000
Trust level: Full
Application Virtual Path: /
Application Path: C:InetpubwwwrootClishareClishare
Machine name: WIN2003-00A346F
Process information:
Process ID: 1276
Process name: aspnet_wp.exe
Account name: WIN2003-00A346FASPNET
Exception information:
Exception type: HttpException
Exception message: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
Request information:
Request URL: [URL]
Request path: /main/home.aspx
User host address: 64.79.69.155
User:
Is authenticated: False
Authentication Type:
Thread account name: WIN2003-00A346FASPNET
Thread information:
Thread ID: 1
Thread account name: WIN2003-00A346FASPNET
Is impersonating: False
Stack trace: Custom event details: For more information, see Help and Support Center at [URL]. When i reset ASP.NET State service, the problem is fixed, but after one or two days, this problem apears again. What's the problem and how can i fix it? And how can i delete a folder in asp.net without the session is lost?
View 1 Replies
Sep 1, 2010
We have a web site that implements a custom SiteMapProvider using a User Control added in the master page. I need to be able to limit the sitemap nodes added depending on the logged in user, that is, certain users should not see certain sitemap nodes. Currently, the login processing code determines if users are in the certain category or role and then sets a value in session state, for example, Session["UserInRoleXXX"] = "Yes"; I tried changing the code in the user control to check the session state, but I got the following error: NullReferenceException ... Object reference not set to an instance of an object." Can session state be accessed in a user control?
View 6 Replies
Apr 21, 2010
Our Web Server rebooted due to power failure. Now ASP.Net State service would not start logging the following error on the server:
Unable to make the Session State Request to the session state server. Last known phase=Sending request to the state server
how to bring back the ASP.Net State service.
View 2 Replies
Jan 13, 2011
I am getting this error "The session state information is invalid and might be corrupted " as i hve checked all my session variable initialized with some default value and the existing code works fine in version 1.1 but on conversion it is giving specified error. The error comes when i simply click on a link to redirect to some other page.
View 5 Replies
Oct 30, 2010
I created a form where I put some radio buttons. When User select one of them depending upon the option it will start his / her time counter. StartTime and EndTime and I am couting total time he/she takes. Till here it is OK. But what I want when user clicks on Logout, then he/she will logged out (Temporary). and after the some time when he / she will again login..... here, I want to set his / her EndTiming. I don't understand how to maintain this state?
View 5 Replies
May 3, 2010
I'm not sure if this is an error or is the right work mode for sql sessions.
I'm working now with Windows 2008 R2 Web Ed. and SQL Server 2008 Web Ed.
When I close my browse and open again a new browser window I need to login again in asp.net application and a new session is created in the sessions table in sql server.
It's this normal? I remember that with Windows 2003 and SQL 2005 this doesn't happend. When I closed my browser and open inmediately a new browser window my session was retained and I could continue working without relogin.
View 3 Replies
Mar 28, 2011
I have upgraded our system from .NET 1.1 to .NET 4.0. I also had to update the ASP Session State database to version 2 by running the following command in the command window.
aspnet_regsql.exe -S localhostSQL2005 -d ASPState -ssadd -sstype c -E
Is there any way that I can configure the MSI setup project to check the ASP.NET Session State and install version 2 if needed?
View 1 Replies
Nov 8, 2010
On my development machine, the session state data is retained after a post back to the server. (XP VS 2008) (This is true if running from within VS or if running in browser with localhost.)On the deployed test server, the session state is blank in IE, but works in Firefox. (Svr 2003 IIS 6)Both machines are running the exact same code with the exact same imputs and same web.config. There is no code between the post backs that write to the session state.Newest addition to the server would be the consumption of a WCF web service. Could this be a symptom of something missing on the server(s) when trying to connect with WCF? I could not find any information other than installing the 3.0 framework. I have 3.5 SP1 installed on the test server.
View 2 Replies
Mar 9, 2011
I'm having problems with the sessions states on my application.When I run the application off my c drive all the session variables are there. Everything works perfectly, nothing is wrong.However, when I publish the site to a server test environment, the session variables disappear. Why is this? Is there a way around this?Here is my codes.for retrieving it. Note, the session.count actually is 0.
[Code]....
for setting the session variables.
[Code]....
View 5 Replies
Oct 6, 2010
I've created a whole bunch of rather complex classes and now i'm starting to work on the ASP.net user interface. Basically the user will open 1 page which will be used to load, edit, save an object. The object has many fields and they are often other classes i've created. To create a nice interface i've used popups and used AJAX to reload parts of the page to avoid reloading the whole thing.
My plan was to create the object and save it to the session. Then each time the page is loaded copy the object values to the asp fields and do the reverse when the page has been submitted copying the asp values to the object field then updating the session object.
So the code will go something like:
onload:
if session is not null load from session otherwise create new
this.txtID.text = object.id
this.txtName.text = object.name
etc etc
on submit:
object.id = this.txtID.text
object.name = this.txtName.text
etc etc
update session.
Is this what you guys would do? or am i over thinking this, seems like a lot of code to load all the object fields each time the page is opened and submitted etc.
Just looking to bounce ideas of off other developers :D
View 4 Replies
Mar 16, 2011
Many web applications use sessions to check the logged in status of the users. Is there a better approach to check the logged in status instead of using session state?
I'm looking at a pure ReSTful approach where is no session state at all. This may make more sense in an mvc application rather than an asp.net application.
View 2 Replies
