I am working on a project where one of the requirements is to re-write an ASP.NET application. The old ASP.NET application was based on .NET Framework 1.1. The new ASP.NET application is based on .NET Framework 3.5.
One of the functions in the old web application was the ability to send email. The old code used the System.Web.Mail.SmtpMail class, whereas the new web application uses the System.Net.Mail.SmtpClient class.
In testing this on our development servers, everything worked fine. However, we have two beta clients testing out our software, and they both run into problems sending email in the new web application.
The specific exception is as follows:
"Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it"
Both the old and new ASP.NET application are on the same server (Windows Server 2003). They both are using the same Exchange mail server. Why is it that the old ASP.NET application can successfully send email, but the new one cannot?
I looked at the old code, and it did not use any form of authentication, it just specified the sender's email address, the recipient's email address, the subject, body, and server, and sent the message. I did the same thing in the new code, with the only difference being that I used the SmtpClient class.
Below is a code snippet from the new ASP.NET application:
System.Net.Mail.MailMessage mail = new System.Net.Mail.MailMessage(); mail.To.Add(messageTo); mail.From = new MailAddress(messageFrom); mail.Subject = messageSubject; mail.Body = messageBody; SmtpClient client = new SmtpClient(); client.Host = smtpServer; client.Send(mail);
when I call the web service from the windows service. But I can visit this web service through IE and I also wrote another console application to call the web service and it works fine, too.
The exception infomation is below:
A socket operation was attempted to an unreachable network 127.0.0.1:8888
I try many methods, like turn off the firewall and anti-virus software, set the web services proxy property to null. but still cannot solve this issue.
I tried this code by inputting the ftp address as ftp//: and the correct username and password and I get the following error
"Unable to connect to the remote server" on line :
FtpWebResponse Response = (FtpWebResponse)Request.GetResponse();I tired this on my ftp server provided by a hosting service and an anonymous ftp located at 193.166.120.5 ?
Note: I was able to connect to both of these ftp through filezilla, via a webbrowser, and through windows command line.
My site sends confirmation emails from a purchase. 95% of the time, it works. The other 5% after clicking the 'Confirm' button that runs the payment and should send the email, i get the following exception:
Details: Exception: Failure sending mail.
Inner Exception: Unable to connect to the remote server
Inner Exception(2): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 72.167.234.197:25
The code to send the email is this:
Dim smtpClientPayPalSuccess As System.Net.Mail.SmtpClient = New System.Net.Mail.SmtpClient() smtpClientPayPalSuccess.Host = "relay-hosting.secureserver.net" smtpClientPayPalSuccess.Send(mailMessagePayPalSuccess)
FYI: I have confirmed with the hosting that I don't need any credentials, or a different port number than 25. This is also running over https. why this would be happening only a small percentage of the time?
I have a problem, my database reside on a separate server and my online website need to access that server to get some data. The server is in my office and connected with Internet.
I have configure the SQL server 2005 on the server to allow remote connections. Enabled TCP/IP and named pipeline. The port is 1433.
2. <add name="DatabaseConnectionString" connectionString="Data Source=nt1111;Initial Catalog=testdatabase; User ID=test;Password= "***"; User Instance=False" providerName="System.Data.SqlClient" />
3. The same as 2 but with IP <add name="DatabaseConnectionString" connectionString="Data Source=999.99.9.99;Initial Catalog=testdatabase; User ID=test;Password= "***"; User Instance=False" providerName="System.Data.SqlClient" />
I recently purchased a new computer running Windows 7 Home, and after installing Visual Studio 2005 and SQL Server 2005 Express, I am unable to connect to the database using the "Connect To Database" wizard. I get the following error:
"This server version is not supported. You must have Microsoft SQL Server 2005 Beta 2 or later."
The version of SQL Server 2005 Express I've downloaded is directly from the Microsoft site and I also downloaded the SP3 to be used with Windows 7, x64 (which I presumed was a later version of the database). I am able to connect to the database programatically, but I would like to get the wizard functionality working as well (as I am unable to add a database to my projects, using the "Add New Item" wizard either).
I had this one working a while back i try to upload file to my root folder it works locally but when i try it from my website i get the following error: exception details: system.bet .webexception. unable to connect to the remote server
the code bomb at the following line
requestStream = uploadRequest.GetRequestStream() 'This is where the exception occurs fileStream = File.Open(localFile, FileMode.Open) [code]....
I am not able to debug a Remote web project (Where the project files are located in another server which is in the same network). I am getting the below error message:
Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData) at Excel.Range.get__Default(Object RowIndex, Object ColumnIndex) at InventoryADD.Button1_Click(Object sender, EventArgs e) in \10.38.23.228q1uatassettrackInventoryADD.aspx.cs:line 670
It works fine when i try to access the website through IIS. Shud i do some setting changes on VS 2005?
I have 2 servers. the database server (DB1) which has sqlserver installed and the application server (WEB1) which has my web application. They are both on the same network and both have the same administrator login.
My web application on the application server needs to access the database on the database server. sqlserver is set to mixed mode in security. i created a random sqlserver user login that can only access my database and set it as the db owner. I use the username and password for this in my connection string. when i run my web application i can read information but i cant write to the database. My app is using windows thentication. I have set my NT AUTHORITYNETWORK SERVICE account to db_owner for my database as well... grabbing at straws!
Question 1: When my application talks to sqlserver does it use the administrator login or the NT AUTHORITYNETWORK SERVICE account which i got from using windowsidentity.getcurrent()?
Question 2: If I use ASP.Net impersonation, what does this do exactly? Because if i run the ndowsIdentity.GetCurrent() i get the username that i specified. How does this tie in with my connection string?
Question 3: If I dont use impersonation what and how do i have to configure sqlserver to accept my insert/update requests? Do i need to work with the NT AUTHORITYNETWORK SERVICE? or can i just use my user login? What do i need to add or remove from my connection string? (see below).
how to edit my web.config connection string mentioned above using the details provided above so that it connect to my MSSQl2005 hosting provider .... ?
I don't know how to edit connection string to do that !!
When i run my site www.vbi.volvobusesindia.com then the following error occurs in top of the page ...
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I have created web pages using VS Web Developer that use a local Developer Edition of SQL server database on my PC with LINQ to SQL. When I deploy my website to a remote web host SQL server, I need for my web pages to be able to use the remote database instead of the local database. So, how do I get the Server Explorer to connect with a remote SQL Server database?
I am using Sql Server 2008 to connect to a Remote Server. Everything was working fine for the last couple of months, and i was successfully connecting to the remote server. Today it suddenly stopped connecting to the remote server. note that i did not alter any configuration settings. Did my isp block Sql Server. My ISP is using ISA SERVER? The error details are:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider) I am using Microsoft Firewall Client For ISA Server for opening ports. But today nothing is working.
In my mvc asp.net application,I am getting error in edit function : in given code
[Code]....
I am getting this exception:
Source : System.Data.Entity
Stack Trace : at System.Data.EntityClient.EntityCommandDefinition.ExecuteStoreCommands(EntityCommand entityCommand, CommandBehavior behavior) at System.Data.Objects.Internal.ObjectQueryExecutionPlan.Execute[TResultType](ObjectContext context, ObjectParameterCollection parameterValues) at System.Data.Objects.ObjectQuery
[Code]....
1 forMergeOption) at System.Data.Objects.ObjectQuery
[Code]....
1 source) at System.Data.Objects.ELinq.ObjectQueryProvider.b__0[TResult](IEnumerable
[Code]....
1 query, Expression queryRoot) at System.Data.Objects.ELinq.ObjectQueryProvider.System.Linq.IQueryProvider.Execute[S](Expression expression) at System.Linq.Queryable.First[TSource](IQueryable`1 source) at admin.com.Controllers.DocsGridController.Edit(Int32 id) in c:DataFinalCodeAC015acomMVCSourceCodeadmincomControllersDocsController.cs:line 307
Message : An error occurred while executing the command definition.See the inner exception for details.This error is generated when I connect with remote server.
I have my site in asp.net and my sql server data base. My application is running fine from my local PC. Earlier I was running fine on server also but before some days back, it started showing error "Unable to connect to any of the specified MySQL hosts" on server machine and local is still running fine. I am confused how it is possible when I am using same data base for both local and server. Hope to get any clue.
OLE DB provider "SQLNCLI" for linked server "xx.xxx.xxx.xxx" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
My asp.net 2.0 is deployed in web hosting.. now here in my server i have configure a static ip.. so how to access my ms sql database all over the world.. i need to know is that i need to write directly connection string in a webconfig of my static ip.. or i need to create a instance of my static ip to ms sql server 2005 to access the database..
Is there any way i connnect a Access 2007 database from SQL Server stored procedure using oledb connection so that i can copy some records from that database?I am asked to achieve this through stored procedure only without using DTS or SSIS.
During Installation to Sql server 2008 on windows7i faced this problem and i cant continue without those requirement which i cant understand any thing from them and how to deal .this is screen shootthis is before installing visual studioas i am so busy i installed sql 2005,but when i tried to connect to remote server which is sql server2008,it failed to make connectionhow to connect to sql sever 2008 from sql server 2005
