I had this one working a while back i try to upload file to my root folder it works locally but when i try it from my website i get the following error: exception details: system.bet .webexception. unable to connect to the remote server
the code bomb at the following line
requestStream = uploadRequest.GetRequestStream() 'This is where the exception occurs fileStream = File.Open(localFile, FileMode.Open) [code]....
I am working on a project where one of the requirements is to re-write an ASP.NET application. The old ASP.NET application was based on .NET Framework 1.1. The new ASP.NET application is based on .NET Framework 3.5.
One of the functions in the old web application was the ability to send email. The old code used the System.Web.Mail.SmtpMail class, whereas the new web application uses the System.Net.Mail.SmtpClient class.
In testing this on our development servers, everything worked fine. However, we have two beta clients testing out our software, and they both run into problems sending email in the new web application.
The specific exception is as follows:
"Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it"
Both the old and new ASP.NET application are on the same server (Windows Server 2003). They both are using the same Exchange mail server. Why is it that the old ASP.NET application can successfully send email, but the new one cannot?
I looked at the old code, and it did not use any form of authentication, it just specified the sender's email address, the recipient's email address, the subject, body, and server, and sent the message. I did the same thing in the new code, with the only difference being that I used the SmtpClient class.
Below is a code snippet from the new ASP.NET application:
System.Net.Mail.MailMessage mail = new System.Net.Mail.MailMessage(); mail.To.Add(messageTo); mail.From = new MailAddress(messageFrom); mail.Subject = messageSubject; mail.Body = messageBody; SmtpClient client = new SmtpClient(); client.Host = smtpServer; client.Send(mail);
when I call the web service from the windows service. But I can visit this web service through IE and I also wrote another console application to call the web service and it works fine, too.
The exception infomation is below:
A socket operation was attempted to an unreachable network 127.0.0.1:8888
I try many methods, like turn off the firewall and anti-virus software, set the web services proxy property to null. but still cannot solve this issue.
I tried this code by inputting the ftp address as ftp//: and the correct username and password and I get the following error
"Unable to connect to the remote server" on line :
FtpWebResponse Response = (FtpWebResponse)Request.GetResponse();I tired this on my ftp server provided by a hosting service and an anonymous ftp located at 193.166.120.5 ?
Note: I was able to connect to both of these ftp through filezilla, via a webbrowser, and through windows command line.
My site sends confirmation emails from a purchase. 95% of the time, it works. The other 5% after clicking the 'Confirm' button that runs the payment and should send the email, i get the following exception:
Details: Exception: Failure sending mail.
Inner Exception: Unable to connect to the remote server
Inner Exception(2): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 72.167.234.197:25
The code to send the email is this:
Dim smtpClientPayPalSuccess As System.Net.Mail.SmtpClient = New System.Net.Mail.SmtpClient() smtpClientPayPalSuccess.Host = "relay-hosting.secureserver.net" smtpClientPayPalSuccess.Send(mailMessagePayPalSuccess)
FYI: I have confirmed with the hosting that I don't need any credentials, or a different port number than 25. This is also running over https. why this would be happening only a small percentage of the time?
I have a problem, my database reside on a separate server and my online website need to access that server to get some data. The server is in my office and connected with Internet.
I have configure the SQL server 2005 on the server to allow remote connections. Enabled TCP/IP and named pipeline. The port is 1433.
2. <add name="DatabaseConnectionString" connectionString="Data Source=nt1111;Initial Catalog=testdatabase; User ID=test;Password= "***"; User Instance=False" providerName="System.Data.SqlClient" />
3. The same as 2 but with IP <add name="DatabaseConnectionString" connectionString="Data Source=999.99.9.99;Initial Catalog=testdatabase; User ID=test;Password= "***"; User Instance=False" providerName="System.Data.SqlClient" />
I am using Sql Server 2008 to connect to a Remote Server. Everything was working fine for the last couple of months, and i was successfully connecting to the remote server. Today it suddenly stopped connecting to the remote server. note that i did not alter any configuration settings. Did my isp block Sql Server. My ISP is using ISA SERVER? The error details are:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider) I am using Microsoft Firewall Client For ISA Server for opening ports. But today nothing is working.
When I press f5 to run my website a prompt message appears displaying unable to connect to asp.net development server. I have tried to restart vs 2010 but that did not work...
In my mvc asp.net application,I am getting error in edit function : in given code
[Code]....
I am getting this exception:
Source : System.Data.Entity
Stack Trace : at System.Data.EntityClient.EntityCommandDefinition.ExecuteStoreCommands(EntityCommand entityCommand, CommandBehavior behavior) at System.Data.Objects.Internal.ObjectQueryExecutionPlan.Execute[TResultType](ObjectContext context, ObjectParameterCollection parameterValues) at System.Data.Objects.ObjectQuery
[Code]....
1 forMergeOption) at System.Data.Objects.ObjectQuery
[Code]....
1 source) at System.Data.Objects.ELinq.ObjectQueryProvider.b__0[TResult](IEnumerable
[Code]....
1 query, Expression queryRoot) at System.Data.Objects.ELinq.ObjectQueryProvider.System.Linq.IQueryProvider.Execute[S](Expression expression) at System.Linq.Queryable.First[TSource](IQueryable`1 source) at admin.com.Controllers.DocsGridController.Edit(Int32 id) in c:DataFinalCodeAC015acomMVCSourceCodeadmincomControllersDocsController.cs:line 307
Message : An error occurred while executing the command definition.See the inner exception for details.This error is generated when I connect with remote server.
I have a heavy traffic aspx page calling a web service upon every user`s request as follows.
string uri = "Path.asmx"; string soap = "soap xml string"; HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri); request.Headers.Add("SOAPAction", ""http://xxxxxx""); request.ContentType = "text/xml;charset="utf-8""; request.Accept = "text/xml"; request.Method = "POST"; using (Stream stm = request.GetRequestStream()) { using (StreamWriter stmw = new StreamWriter(stm)) { stmw.Write(soap); } } WebResponse response = request.GetResponse(); response.close();
Everything is working fine but sometimes I am getting the following error. The remote server returned an error: (500) Internal Server Error. at System.Net.HttpWebRequest.GetResponse() Does anybody have any idea about this error or can anybody tell me if I am doing wrong.
I'm a bit of a beginner to ASP.NET and I'm having a trouble connecting to SQL Server Express.
I'm using Windows 7 and have tried connecting to my database using both Windows authentication and a user account I setup in SQL Server.
I've include the code I'm using below (using the account I setup in SQL Server):
[Code]....
The error I get is that it can't login using the login details provided
Just wondering if there's anything I'm not doing something properly? This is the first time I'm trying to connect to a database using Windows 7/SQL Server Express so hoping someone with a bit more experience can give me a hand!
I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio.I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem.
I have now set Named Pipes and TCP/IP back to disabled. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message:
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
My first question here is: why is it returning a Named Pipes error? Why isn't it using Shared Memory? It seems like it is not listening on Shared Memory for some reason?When I set Named Pipes to enabled and try to connect, I get the same error message.My windows account is does not have administrator priviliges on my computer.
i just install the sql server 2008.today i try to open sql server management studio for create database, but once i open, a box say connect to server,when click connect,the error 18456 show.May i know what is the problem?my object explorer also doesn't show anything.my pc is windows 7.
i have sql server 2008 and visual studia 2008 install in my system when i open a new website project and then use the asp.net administration tool in that when i go for security tab under that one.
i want to enable roles but it displaying error that unable to connect to sql server database.
I am using an Visual studio 2010 ultimate edition. And here i have getting an error " unable to connect to the asp.net development server " while i try to run the Web Application by pressing F5 key from Web Application Project. Can any tell me whats the problem and how can i resolve it.
I developed a website project using visual studio 2008 and language used is c#. It was working fine till yesterday[i.e., It compiled and also i could run it using the asp.net development server by pressing ctrl+f5] and today when i tried to run it says "unable to connect to asp.net development server". I tried to reinstall visual studion 2008 and even now its not working. Also when i go to websites n asp.net configuration option it say the same error "unable to connect to asp.net development server". I absolutely no idea about why this error popped up. I got my project demo. day after n how can this be set right.
I just started getting the error message "Unable to Connect to the ASP.net Development Server" when debugging a website with VWD 2008 (everything was fine in the past). My system is Windows Vista with Windows Live OneCare firewall. I have reviewed other postings related to this problem, and they indicate firewall setting problems - settings not allowing VWD internet access. However, my settings on the "Windows Live OneCare Firewall Advanced Settings" tab specifically allow VWD.
When I am trying to invoke a method using a proxy class i get error
"System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.NullReferenceException: Object reference not set to an instance of an object. at ..."
using oAuth.net library for the Gmail Contacts API The request seems well-formed and I have stepped through the requests, and cannot discern anything wrong. Tried checking if the timestamp is an issue - it seems that was a common issue on the gmail forums, tried changing to various time-zones, still no luck.
I have a MySQL data at a web hotel. I can connect to the database from my web application hosted at the hotel . But trying to connect from a client application running on my PC fails using the same ConnetionString. The error is: Unable to connect to any of the specified MySQL hosts
In fact the method below (the method is protected in the web application) fails in my client application but works in my web application.
[code]....
I just tried to download WorkBench 5.2 and HeidiSQL, both connects to the database from my PC when supplying server and password information.