I have an UpdatePanel with ContentTemplate specified. When page loads, user can do some AJAX work in other part of the page. Then, after that work is finished, I would like to update only content inside UpdatePanel, but without pressing any buttons etc. I should be done automatically using JavaScript when previously started AJAX work finishes. How to do it without manual clicking on the trigger button?
EDIT:
Ok, I've followed that _doPostBack rule, and whole page is posted.
i've an UpdatePanel with a LoginView inside, now, inside the AnonymousTemplate i've a Button (btnLogin), the problem is that the Triggers tag don't see the button. here is the code:
I would like to add a button to Update panel's trigger. But am getting an err says "Update panel can not find the button which trigger it".
I am getting "Sys.Webforms.PageRequestmanagerParseErrorException: This message recieved from manager could not be parsed. Common cause for this error are when response is modified by response.write"
I have 3 gridviews in one of my web page. I have simplified the system structure in the image below(further description will be stated below the image): As shown in the image above, the web site(presentation layer) will work closely with the Business Logic layer(BLL) and Data Access Layer(DLL). ObjectDataSource control will be the middle man to select, update, insert and delete the data in the gridviews. During Select, returned data from the database at DAL will be stored in a datatable and return to BLL and then the website itself.
The data in the returned datatable will be filetered by type using RowFilter method and stored into the 3 dataviews. Each dataview will act as the datasource for the 3 GridViews respectively, and therefore I specified the datasource programatically instead of setting the datasourceid for each gridview.
However, the Update(command button) and Delete(template field) doesn't work, the RowUpdating and RowDeleting event wasn't trigger when I click on the button, but it works if I set the gridviews' datasourceid to the objectdatasource. I couldn't figure out why, hope that someone who have come across the same problem couldn't provide some guidance.
I am trying to trigger a update planel when a user clicks on an button on a GridView. Once the button is pressed the id of the record gathered and then more information will be gathered and sent to lbl.Text in updatePanel1.
I have 3 gridviews in one of my web page, each of which will display different data based on the typeid. I have simplified the system structure in the image below(further description will be stated below the image):
As shown in the image above, the web site(presentation layer) will work closely with the Business Logic layer(BLL) and Data Access Layer(DLL). ObjectDataSource control will be the middle man to select, update, insert and delete the data in the gridviews.
During Select, returned data from the database at DAL will be stored in a datatable and return to BLL and then the website itself.
[code]....
However, the Update(command button) and Delete(template field) doesn't work,the RowUpdating and RowDeleting event wasn't trigger when I click on the button, but it works if I set the gridviews' datasourceid to the objectdatasource.
How do I conditionally trigger a full page postback from a link button inside of an update panel?
I have a custom control that contains its own updatepanel with a link button nested inside of it. When the link button is pressed I want its event handler to have the option of either letting the control update as normal or doing a full postback on the page.
Here is the control hierarchy:
Page Custom Control UpdatePanel LinkButton
Event handler Pseudo code:
LinkButton Click Handler Begin If is a partial post back AND a full postback is needed Page.DoFullPostback End If End Handler
Note: I aways need the partial postback to happen. I was considering injecting a __DoPostback in the controls markup but this seems hacky to me.
I have a web user control with one updatepanel (pnlUpdate_2), some controls and one apply button. I display the web user control as a modalpopup in my default page. In my default page i have an updatepanel (pnlUpdate_1) with a gridview and I modify that gridview with the apply button of the web user control. The web user control is for made a custom search of the gridview data. I have a problem with both updatepanels. If I set the updatemode as always in one of them (pnlUpdate_1) and the other as conditional (pnlUpdate_2), the pnlUpdate_1 make a postback in the pnlUpdate_2; I'm not an expert on this but I think that's why the pnlUpdate_2 disappear and reappear after postback of some controls in that updatepanel (not the apply button, it close the modal after postback). I try all the combinations and the problem persists. So I put both updatepanels as conditional and in some way it works; now the problem is that when I click the apply button in pnlUpdate_2 to modify the gridview in pnlUpdate_1 the pnlUpdate_1 not made the postback I get the pnlUpdate_2 postback when I use some control inside the pnlUpdate_1.
How can I postback the pnlUpdate1 from pnlUpdate_2 with the apply button?
i have a website with three UpdatePanel Control and inside of each UpdatePanels has ONE Gridview and a SqlDataSource Control.
all gridviews are connected to its own SqlDataSource Control. so technically when i run my website all gridviews automatically get their data from their respective SqlDataSource Control and display them accordingly.
but what i need to do is instead of letting all the update panels to load each gridview their data upon Onload event, i need the updatepanel to update on queue, (Technically changing the UpdateMode to Conditional does not solve my problem.) there will be an event which will trigger the updatepanel to update later.
In my application I am using ajax updatepannel in which there is a tab container tool having 4 tabs, in the third third tab I used ajax accordian control which has 2 panel each pannel have one gridview control a Remove button. Here what I want to give delete facility to the user upon the selection of checkbox corresponding to the particular record. But when I click the button it doesnot triger the button click event of the remove button.
I have some code that I am working on that uses an UpdatePanel and some dynamically created buttons to perform functions. The problem is that the dynamically created buttons aren't working the same as my test static button, which is behaving exactly as it should be.
So I was wondering if someone would be willing to simply post an example (in VB.NET or C# please) of the following:
An UpdatePanel has a Label and a Placeholder inside of it
The Placeholder has a dynamic button added to it
Clicking on this button will make the Label say "Hi" without performing a full page postback.
If I can just get that much to work, I am sure that the rest of the code will be fine. I just can't seem to get my dynamic buttons to act like my static ones do in an UpdatePanel.
I have a button that is inside of an updatepanel, I want it so that whenever the user clicks on the button it would update items in the updatepanel and after that it would activate the animationextender but I can't do that as of now because on the button I have OnClientClick="return false;".
I am building a system for a school project. I currently have several Update Panels on the page that have many different controls on them. I also have a single Label control that i use to display messages to the user. I would like to have this label within an update panel also but there are literally hundreds of triggers that would require it to be updated and i dont want to type an absurd number of triggers for this one control.Is there a way for me to have this one panel update regardless of what happens?
I have update panel , in update panel i have one button control which exposes onlientClick event ( it dosent have click event to do postback to server).
and i have one updateprogress panel. So my problem is though i'm performing operation on client side , internally the async event is firing and making updateprogress panel to act (having rotation gif image) which i dont want , as it rotates for 10-15 sec more even after the operation at client side is done !
I have a problem and i have been stuck on it for a while now: I have a ListBox generated dinamically on the page at the first init of the page. That part of the page will never make a postback again while being used.
Say i have 10 UpdatePanels in the same page and there will be a maximum of 10 ListItems in my ListBox. How can i make every ListItem in the ListBox be a trigger for my existing UpdatePanels , so that when i doubleclick one ListItem , the apropiate UpdatePanel will be updated ? Or if you have any other close solutions.
I have the following case, all my controls on an update panel on the page.
one of these controls is a grid view , this grid view contains a check box on the header template field( to make a check all) . the autopostback is true but when the check changed no thing is happen , the update panel has a trigger asynchronous post back for the gridview.
I am loading a Usercontrol with another Updatepanel inside of it. Now in this usercontrol, i have a button which is registered as an async postback trigger for the 2nd Updatepanel. However when I click the button, nothing happens. While debugging, it does not even step into the Click event of the Button which sits in the usercontrol of course. The Parent Updatepanel ist set to Updatemode conditional and hildrenAsTriggers="false". The nested UpdatePanel2 is set to Updatemode=Conditional. I just want the Parent Updatepanel to do nothing and the button to fire its event so that I can load some data in the nested updatepanel.
I have a CheckBox that is located inside a SelectItem Template. The CheckBox has Autopostback= true. Located outside the list view is a label. When the CheckBox is checked, I would like to trigger an the Updatepannel that includes the label. Instead I get an error message "'CheckBox1' could not be found for the trigger in UpdatePanel 'UpdatePanel3'. The code snippet is as follows:
I got a aspx page using a master page. In the aspx page, i got multiple Content section: [Code]....
What I was trying to do is to perform a post back on Content Id "Content2" with a event trigger by both of the drop down list. The problem here is the drop down list is inside "Content 1".The error I got is: [Code]....
I have seen this discussed in number of topics, but so far nothing to address my specific issue. I want to display the page the client, and then trigger an updatepanel refresh that will populate with data that takes 3-4 seconds to load (the rest of the page loads very fast). At the same time I want to display "...Loading..." text using UpdateProgress control.
Everything is working below in the sample code. However, UpdateProgress will not display unless the button is actually clicked by the user. In real production scenario I would hide the button. To invoke the immediate UpdatePanel refresh I trigger the click via Javascript. I have also tried "__DoPostBack" without success.
<code> <%@ Page Language="C#" AutoEventWireup="true" CodeFile="TestUpdate.aspx.cs" Inherits="TestUpdate" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> [code]...
