VS 2005 Using IE8 And Breakpoints/debugging?
Mar 3, 2010Yesterday I've installed IE8 but now my debugging and breakpoints does not work in VS 2005! How can I make it work again? Is it a special browser setting?
View 2 Replies
Similar Messages:
Visual Studio :: Breakpoints Stopped Working During Debugging?
Sep 3, 2010I had the strangest bug yesterday while trying to debug in vs.net 2005....
I had an '05 web application. I clicked the "Run" button to start debugging, and the webpage popped up fine. I could run through the pages fine. Everything seemed fine....UNTIL!
Until I tried to start inserting breakpoints into my code. The application ignored them. In addition, I noticed my little green visual studio "Start Debugging" arrow (which is normally greyed out while in debug mode) was green. It was as if visual studio completely detached itself from my website I was trying to debug.
After playing around with it for a while, I realized I also had a vs.net 2008 solution open as well. My '08 solution wasn't in debug mode or anything, it was just sitting there open. I just happened to close it, not thinking anything of it, and presto! My 2005 debugger started working again!
So basically, I can't debug an '05 solution (or at least a web solution, as that's all I tried) while I also have an '08 solution open.
Visual Studio 2008 Debugging Zombie Breakpoints Come Back After Being Deleted?
Jun 30, 2010In Visual Studio 2008 while debugging an ASP.Net website I set a breakpoint in the codebehind page. I refresh the page or submit to call the method, the breakpoint is hit. Then I delete the breakpoint and continue execution. I make a change to the codebehind page and save it. I submit or refresh again and the deleted breakpoint is back! It is hit again, and I delete it again. I have tried delete, disable, nothing works it keeps coming back if I make a change to the page. It is extremely annoying and unproductive. The only way I have found to make the breakpoint permanently go away is to use the Debug menu Delete all breakpoints item, which is obviously less than ideal. I have been able to reproduce this on other developers machines also. What is going on here? Is this by design? Is it a bug in VS? How do I keep these zombie breakpoints from resurrecting?
View 4 RepliesVS 2005 Added Around 3-4 Breakpoints But None Get Hit
Jul 20, 2010I tried to follow sample code to perform db update from this thread but none of them work in my case.
That is 1 sample.
1 Code:
[code]....
Both sample do not return error or anything and the web form just refresh when I hit update button.
One thing strange more the code dont pause in breakpoints. I added around 3-4 breakpoints but none of them get hit.
VS 2005 Debugging Popup Window
Jul 4, 2013i want to ask about Debugging Features of Visual Studio.Net 2005,
Question :
1. can i see the contents of Count = 35 ?
Count = 35 means ref DataTable have 35 rows (records) right ?
2. what is DesignMode = False,
DisplayExpression = "",
ExtendedProperties = Count=0,
etc..
VS 2005 - Unable To Start Debugging On Web Server
Nov 13, 2013I was working away just fine on my ASP.NET 2.0 application (Win7 64 bit, IIS 7.5.76) when all of a sudden I get a pesky error message "Unable to start debugging on web server" when I start the app in Visual Studio. The error message (attached) is HTML text and is so long that I can't even get to the bottom of it to see what the punchline is. It happens with debug switched on and off.
View 3 RepliesVisual Studio :: Debugging Transact Sql Code In 2005?
May 7, 2010I have been using visual studio 2005 Prof. Edition to debug stored procedure using this tool. However I cannot use the comment field as it is grayed out.
Is it possible to comment code in transact sql using visual studio 2005.
Visual Studio :: Unable To Start Debugging On The Web Server At 2005/Window 7?
Jun 16, 2010I used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to
build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
Visual Studio :: Unable To Start Debugging On The Web Server / Debugging Failed Because Integrated Windows
Jun 3, 2010I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesVisual Studio :: How To Turn Off Remote Debugging 2010 / Unable To Start Debugging On Web Server
Mar 7, 2011I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
Visual Studio :: Start Debugging Option Is Shown In The Visual Studio 2005 IDE?
Feb 9, 2011I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 RepliesIis7 - Unable To Start Debugging On The Web Server - Couldn't Start Debugging VS 2010 - II7 - Win 7 X64
Jan 11, 2011I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
Breakpoints Not Being Hit In Webservice Hosted In IIS
Aug 31, 2010I am trying to debug a webservice that is hosted in IIS. When I open it through Visual Studio as a website, put a breakpoint and run it, it is executing as expected but none of the breakpoints are being hit. When I remove the virtual directory from IIS, I am able to hit the break points. One of the suggested solutions was to attach aspnet_wp process during Debug. But the aspnet_wp is not running on the system (I have checked the options 'Show processes from all users' and 'Show processes from all sessions').
View 3 RepliesMVC :: Breakpoints Not Getting Hit In Unit Testing?
Mar 2, 2010I created a new ASP.NET MVC application and the accompanying unit tests that can be generated automatically. I created a new Controller method and tried to wire up a test. The test failed, and I tried to step through the test code to find out the state of certain variables. The breakpoint showed as being set, but it never was hit.
I did a Google search on this, and there are many other people wondering the same thing - why doesn't this work? The answers have been sketchy at best. The most proliferant seems to be that the unit tests are run in the production configuration instead of the debug configuration, and so several steps are required to get breakpoints to work. Seriously? This is something I would expect to be enabled by default. What good is test code you can't step through? Why create a set of unit tests that require you to jump through several hoops to get this very basic feature running? NUnit (and I suppose others) don't have this issue.
how to get the breakpoints to work were completely different than all the others, and I'd like to know if anyone has an idea of how to enable debugging of the unit tests that are included in Visual Studio 2008.
Visual Studio :: Unable To Use Breakpoints?
Mar 17, 2010I have my project in VS2005, its is working fine last few years, But now durning development i face problem regarding breakpoints, here Im unable to get stoppage at breakpoints, I have change setting of security in Internet options add localhost as trusted site, but still its remain the same.
I also try Attach to process.... option from the debug, here webDev.WebServer process of running site is disable. Now Im totally unable to debug my project.
C# - Set Javascript Breakpoints In Vs2008 Or Vs2010
Feb 12, 2010im itrying to debug javascript using vs2010
but i can't set breakpoints?
how can i do this?
edit:
i just noticed something, every time i try to call a function, no matter what function, in javascript, somehow jquery and ms ajax framework javascript captures it and checks if the document is ready (document.onready or other) and never returns the control back to the function im calling! why on earth is it doing this? i've never asked for it to!
all i have is references to these libraries, script/link references as you do on the top of your master page.
Web Forms :: Breakpoints Are Not Executing When Run In Debug Mode?
Jan 5, 2011I dragged-and-dropped a few image buttons on my VB.net page. I put a break point on the AddButton Sub routine.
When I run debug and click the button it never picks up on the break point. What's up? Is there something about image buttons that I'm not aware of?
Example of one image button and click button sub:
[Code]....
[Code]....
Update: I've just now noticed that whenever I put a breakpoint anywhere in this project and run debug, it never executes the breakpoint at all. Do I need reinstall Visual Studio?
Visual Studio :: Can't Insert Breakpoints In JavaScript
Aug 5, 2010When I try to set breakpoints in a JavaScript code file, I get the warning, "The breakpoint will not currently be hit. No symbols have been loaded for this document."
This is a fairly large project that was working normally under VS 2008. I just installed VS 2010 Pro Academic, and this is one of the new problems that have appeared. It's running under Win 7 64-bit, IE 8, and both of the IE "disable script debugging" options are turned off. Debugging is enabled in the web.config file. The JavaScript code in question is being executed normally, and inserting "debugger" in the code works as expected. While running under debugging, you can open the corresponding script document from the Solution Explorer, Script Documents, and insert breakpoints just fine. Attaching to the IE process (from the Debug menu) doesn't seem to make any difference.
Basically, everything I can think of looks normal, and yet I can't insert breakpoints into the original source code with VS 2010. The problem is reproducible on more than one JavaScript source file. I rebooted and consults The Great Google, all to no avail.
This is a real headache for development. Has anyone else discovered a fix for this?
(UPDATE: I spent a few hours and created a new project, and copied all of the files from the original to the new one. Now, I can set breakpoints n the new project, but still can't in the original. Something's different between the two, but it isn't clear what it could be.)
Visual Studio :: Mapped Breakpoints In Mvc Views Not Working?
Jul 12, 2010I have a asp.net mvc project in VS2010. In it I have a view called main.aspx that contains alot of javascript that frequently needs to be debugged. I can set the break point in the aspx page's javascript at edit time in VS2010. It appears as a mapped breakpoint. When I launch the debugger/IE browser, the javascript break point never gets hit. If I add a debugger; statement to my javascript I can launch a new visual studio instance and debug javascript. Unforunately, this requires a second visual studio instance and I have to set breakpoints all over again when I do it this way. Also, I have to remember to remove the debugger; statement when I am finished debugging. Is there a better way to get client side breakpoints working in Visual Studio 2010/IE?
View 3 RepliesAJAX :: Unable To Hit Any Breakpoints In VS 2010 With Control Toolkit
Mar 31, 2011I had a dropshadow extender attached to a gridview. I was getting an error: Microsoft JScript runtime error: Sys.ArgumentException: Value must not be null for Controls and Behaviors. Parameter name: element So I removed the extender and I have a break point on: If Not Page.IsPostBack Then And it never stops there anymore. Page comes up though. I have restarted VS and rebooted. The app consists of a WebSite and WCF.
View 4 RepliesVisual Studio :: Encountered:No Syntax HighlightingNo Breakpoints?
Sep 1, 2010We've currently migrated our Classic ASP web to ASP.NET. Our greatest hope lies in using the Visual Studio for debugging. But this hope was destroyed devastatingly.There are lot of issues we encountered:No syntax highlightingNo breakpoints (message: "This is not a valid location for a breakpoint.")No Intellisense
We cannot find the reasons. But we think VS can't resolve our include links correctly. (In our case we remove all inludes and the page was highlighted again.)That's why we have a lot of questions:Can VS2008 handle includes (<!-- #include file="myinclude.inc" -->) at all?Are there any constraints we need to know? Maximal lines to include? Including<% .. %> or <script language="vb" runat="server"> .. </script>?
What settings have to be made?
C# - Visual Studio 2010: Breakpoints Don't Work After Rebuild
Jan 25, 2011I'm working on a VS2010 Solution containing an ASP.NET Website Project and 8 c# class libraries. All projects are set to compile under .NET 3.5
When I set a breakpoint somewhere in the class libraries, the debugger breaks correctly and everything is fine. If I then stop debugging, modify code in the class library, and start debugging again (which of course rebuilds the libraries which were modified) the debugger ignores the breakpoints.
Has anyone else experienced anything like this? I'm lost and it's extremely frustrating to not be able to debug after making even a single line change and rebuilding.
Visual Studio 2010 Ultimate Windows 7 Professional 64-bit
MVC :: RedirectToAction Params And Breakpoints / Value Of 'projectID_DDL' Is Null When The Redirect Occurs?
Jul 12, 2010I have an ActionResult method that loads a user-selected project. When the user makes a selection from a select html element, the id is passed in and loads the project. This works fine. The user can also submit the form, which saves certain information and then calls a RedirectToAction that passes the project id back into the load method. This is where the problem occurs. Here's the relevant code:
[Code]....
The problem is that the value of 'projectID_DDL' is null when the redirect occurs. I'm aware that during a form post that variable is automatically mapped to the name of the html element, so my first question is if that precludes referring to the parameter name as anything else, even in code. In regular methods, it doesn't matter what you call the variable, provided it's the correct type for the parameter it corresponds to, but ActionResult methods might differ. My second question is about break points. In order to test that the value of 'projectID_DDL' is what I passed in, I set a break point. It was never hit. I even tried adding a line before the return View statement, thinking perhaps that the return View statement threw the exception, and so its breakpoint wasn't being hit. This didn't work, either.
Visual Studio :: Unable To Put Breakpoints On Client Side JavaScript Code
Mar 20, 2010I am using VS2008, SP1. I am unable to put breakpoints in my client side javascript code. Wherever I try to put the breakpoint, I am getting the message: "This is not a valid location to put the breakpoint". I have the js intellisense working fine. I also unchecked the two "Disable Debugging" checkboxes on IE. Due to this problem, I am unable to debug the js in VS 2008.
View 3 RepliesVisual Studio :: Breakpoints Not Working In 2008: "No Symbols Have Been Loaded For This Document?
Oct 13, 2010nfortunately, I can't get my breakpoints to work when in debug mode in Visual Studio 2008 (ASP.NET 3.5, Windows 7, IIS7). The website compiles and opens in debug mode, but the breakpoints themselves generate the following error message:"The breakpoint will not currently be hit. No symbols have been loaded for this document."There are some recommended solutions online, but for various reasons, either they haven't applied or I haven't been able to make them work. I've been trying to find the solution for about 12 hours now, and I'm getting desperate.(Note 1: This problem is specific to this website. I do have other websites that I open in VS2008 where the breakpoints work fine.)(Note 2: There is only one website/project associated with this problem. This website does not have multiple projects.)
View 1 Replies