I just finished getting my application working, this is an Ajax Web Enabled program using Ajax AutoCompletExtende and a Web Service. asmx within the same project.
To my big surprise I am not able to debug, I am setting break points but program does not stop. Example, I have added a TextBox control moving "Hello World" into it. The page shows the value of the TextBox but does not stop at the break point.
I have debug=true both in the web.config and in the requested file but it still won't stop.
View 1 RepliesI'm going crazy and wasting a lot of time. I am running in DEBUG, checked the web.config to ensure debug=true is there, checked the code to ensure I am reaching it, cleared all temp files and pdb's. The only thing that works is to continually kill the solution, create a new solution and add all the projects again.I shouldn't have to do this every day.
View 4 RepliesI have an application in Visual Studio 2008. I have been working with it for some time. Today, suddenly, it will not debug, or more specifically it does not stop at the breakpoints I created in Visual Studio. It just ignores them. I tested the break points by adding one at the opening of the Page_Load event and nothing. If I put in a mistake on purpose the application will build, the internet explorer opens, and gives me an error report. It has never done this before. Usually it stops IE from opening and gives me a list of errors at the bottom of the VS screen. I want my old VS back. I don't see how this could have changed it but I'll mention the things I've worked on recently. I've been trying to configure the session states in the web.config page, and then recently I started a new web page with a conection to a database and gridview. I have restarted VS and nothing has changed.
View 2 RepliesI have an aspx page that is getting an Object Expected javascript error on submit, but when you break into the error the breakpoint is somewhere in the middle of the __VIEWSTATE input html element.A javascript stack dump shows just "{anonymous}(null)".What does this mean and how does one go about debugging further?
View 3 RepliesI'm running ASP.NET on Visual Studio 2005, and I am not able to step through my break points when I run my application in "Debug" mode. I set the break points, run the application, and Visual Studio simply ignores them.I have gone through all of the configuration settings and project properties to see if their is something obvious that needs to be turned "on" - but I don't see anything.What would be the most logical settings or references to look at?
View 7 RepliesI need to show an image and then 4 pointer small images. The user then has the facility to grab each of the pointer images and drop them on the large image.
Is this possible and if so how do I go about getting started or is there and third party controls out there that will do the job.
I have an puzzling problem. I have a new ASP.NET web application in VS2005 that runs fairly well, but I am having a problem and would like to set a break point to see what is going on. I have compiled the project in Debug mode. I have debug=true set in the web.config. But it appears that the IDE is not attaching to the process at all. Have I overlooked something? I am using the development server and not IIS. This has never been a problem in the past, but is this time.
View 3 RepliesI am trying to set history points for a form that posts to a second page. Both the first page and second page are content pages in a master page.The form is in an update panel and consists of several textboxes, one radiobutton group of two radiobuttons and one ajax calendar control. The last two textboxes are a zipcode box and a county box. The county box is populated from a database table when the user fills in the zipcode in a textbox and tabs out or clicks in the next textbox.
View 3 RepliesI am currently using the new asp.net chart control.In this control i am not setting the maximum, minimum and the interval value because they are dynamic.ow once the graph is populated from database, the asp.net is only generating 4-5 points on the y -axis, i want it to show at least 10 values.But i am not sure how to increase the number of points on Y & X Axis.
View 1 RepliesI just recently installed VS 2008 on my workstation. I tried creating a simple web site just to check if the installation was fine. The project compiled without error but when I tried running it, the Macromedia Dreamweaver software is being launch. It tried it several time and it's all the same.I remember during the installation there was an option that was displayed asking me to select Designer or Coder. Since the default is Designer i just click next.
Is there a way to stop launching dreamweaver from VS 2008 every time i try running the web project? Is because I selected "Designer" during the installation?
I have 2 questions
1)Can I stop VS2008,VS2010 creating automatic style in the VS2008 .aspx source view.e.g .style1{ width=100%"
2) All aligned source view code changes and after certain amount of time,If you could tell me any setting which could stop VS creating automatic styling also fixing the alignment just once.
One of my apps is to document aircraft inspection at mil sites. The discrepancy report for any one tail number can be many pages long. The description of the discrepancy in a gridview cell can be several lines. Therefore when the gridview hits the bottom of the physical page, the print spooler frequently splits the gridview row leaving part on one page and the rest at the top of the following page. I have done my due-diligence in research before posting but maybe I'm using the wrong words. I found something on CodeProject but it is too complicated for me. Does anyone have a simple solution? I use C# and am not very sharp with Java script.
View 6 Repliesusing vb.net/asp.net 2005 after the user clicks on a button in the buttonClick event I am trying to set the focus at the end of the function simply as follows:
[Code]....
However the focus is instead going to another button. The tabIndex property is not set on any controls on the page.
I have problems setting the font for Button:
Code:
If e.Row.RowType = DataControlRowType.Footer Then
Dim myButton As New Button
myButton.Text = "New"
[code]....
I am working on reporting services 2005. I have a problem setting table cell(textbox) borderstyle.Some cells are for 'Amount' summary, so I want to set those cells' top border as 'Solid' and It works, but at the same time, the table's top border is set 'Solid' as well, that is what I don't want. I only want to set the cell' border. So how should I do?
View 1 RepliesI have a VS2010 project that I want to move back and forth between an x86 and an x64 machine. On the x86 machine, several assemblies are located in Program Files, and the path of the assemblies are shown as c:Program Files...... When I move this project to the x64 machine, the same assemblies are located in C:Program Files (x86).... Is there a way that I can confugure VS2010 so I don't have to manually change the path when I move the project from one machine to another?
View 1 RepliesHow do I setup a default setting so that if I do not set an OnClick (i.e the asp.net OnClick attribute) explicitly for an asp:LinkButton tag, it will not render an onclick(html attribute for javascript) attribute client side? By default, asp.net adds an onclick='doPostBack....' for the LinkButton.
Case for use:
There is a LinkButton tag on the page. For this page, if the user has one friend, I only want to run client side code if the button is clicked and would not for any reason want to make a post back. If the user has more than one friend I would want a click to trigger a postback.
Using any asp.net Ajaxtoolkit
Dynamically switching the control type (i.e. if friends == 1 use a asp:Hyperlink)
-I want to avoid this because it is not scalable. There might be many cases where I want an asp:Link tag to do a postback or to not do a postback depending on the user context or user attributes Using OnClientClick (I am using jQuery would like to avoid this)
How to validate if user enters more than one decimal points(dots) in fields such as Cost. ie; 250.45.66
View 7 RepliesI have data in data table like below.
I am trying to make graph like below using asp.net chart control (made graph in excel with some test data)
points are X and Y values. lines are linear, exponential, logarithmic and power values.
how can I make this chart in asp.net (vb.net or c#)? I am newbie to chart control.
I am using below link to get direction:[URL] wheb i hit above url in browser then i get xml response, can anyone tell me how to fetch shortest distance from that response(XML). i need distance only, not direction.
View 1 RepliesI have followed this tutorial [URL] to get a google map displayed but now I want do the next step and read the long/lat and text out of my ADO.NET Entity Data Model and put it on the map (preferably the text should appear when clicking on the red spot in a white text box - as you know it from google). Has someone done this already and could let me know how I get the points on the google map? THis is how the function in my controller looks right now:
Function Map() As ActionResult
ViewData.Model = (From m In _db.ahn_mappoints Select m.LONG, m.LAT, BLOG = m.Text.Substring(0, 81) & "...").Take(2).ToList()
Return View()
End Function
I'm using asp.net AJAX and history points with the ScriptManager and it works great. My only problem is that when I make non AJAX pages I have come to love url-rewriting with nice "hackable" urls. Without SecureHistoryState my url will look like for example [URL] where "/Home/Frontpage" is the page to show. I have seen on other web-pages with AJAX (maybe not asp.net) that the url will change into for example [URL] which is a lot nicer. Or if I could have[URL]I would be very happy. I don't need the history url to contain anything else than the page path. Is this at all possible with asp.net AJAX?
View 1 RepliesI used this brilliant solution to convert a linq query to a datatable. But I'm getting a strange error when running it. Build succeeds though.
Compiler Error Message: CS0121: The call is ambiguous between the following methods or properties:
'Gruppkoll.App_Code.ConvertToDataTableFromLinqResult.ToADOTable<Gruppkoll.MessageSet
(System.Collections.Generic.IEnumerable<Gruppkoll.MessageSet>)' and
'Gruppkoll.App_Code.ConvertToDataTableFromLinqResult.ToADOTable<Gruppkoll.MessageSet (System.Collections.Generic.IEnumerable<Gruppkoll.MessageSet>)'
I've tried re-building it and restarting the IIS. It seems as there are two classes with the same method but I've checked this and that's not the case. I'm using .NET 4.0 ASP.NET Webforms.
I have line chart which has values :
[code]...
when we set IsValueShownAsLabel=true on y-axis it shows value 0.
but graph showing values below zero at last 0.00 before 327.78.
Because I m new user cannot upoad image have a look Chart image from below url: [URL]
