VS 2008 - Viewing ASPX Page In IFrame With IE Fails

Oct 31, 2011

A client of ours uses a home owners association website as a service. They can add pages to the site. We added a page and used an iframe in the html code to display another website which is needed. It works fine in all browsers except some copies of Internet Explorer. For example, it does not work at my home IE8 but may for others.

But here is where it gets wierd! When I try to view it in IE, it fails by just keep trying and eventually fails. Then if I past the URL it is trying in the browser by itself, it loads. Then I go back to the association website and try and it will work by loading the website in the iframe page. It does this only after I view the website url by itself in the browser.

View 3 Replies


Similar Messages:

Trying To Add Iframe To Aspx Page

Feb 12, 2011

I'm trying to add iframe to Aspx page and I'm trying to set the "src" attribute to the page I want with few url parameters.

<iframe
src='<%# "FileUpload.aspx?FolderLevel1=a1&FolderLevel2=" + Session["level2"] %>'
visible="true" scrolling="no" height="100px" width="400px" frameborder="0"
id="I1" name="I1">
</iframe>

View 2 Replies

Is It Possible To Use Iframe To Point To An .aspx Page

Feb 22, 2010

I'm trying to use an to point to an .aspx file, but when I load it I keep getting an empty frame, no matter what is in the target aspx nothing gets displayed. Here the html:

<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title></title>
</head>.....

So my question is, Am I missing something when defining the iframe or is completely impossible to point to an aspx with an iframe?

In case it is impossibe is it another way to show aspx pages withing another html page?

View 4 Replies

Javascript - Resize IFRAME Onload In .aspx Page

Feb 8, 2011

In an .aspx page with the vb.net codebehind i am using IFRAME , which would be created inside the repeater control. Since i want to resize the IFRAME based on the content within the page i have been using the resize function Obtained from here on the IFRAME onload as shown below.

<iframe id="IframeSubsectionArea" scrolling="auto" width="100%" onload="resizeIframeToFitContent(this)" runat="server">

However it is throwing the error as the method could not be found in the form. Is there any client side script variant for the onload event? May i know,What might be the reason for the error and its solution?

View 1 Replies

Uploading Aspx Page With Iframe HTML Switch Links

Apr 28, 2010

I have an aspx project running in a html Iframe. When I upload I have to switch all links from html manually.

Can I use a switch mechanism to avoid making mistakes manually?

View 3 Replies

C# - Call Child Iframe Method From Parent Aspx Page?

Jul 26, 2010

I've created one aspx page Default.aspx. It contains iframe with child.aspx. File Child.cs contains web methods which should be called by parent page.

As I understand I need to receive the instance of Child class so then I'll be able to them call. How can I make this?

Default.aspx (Parent page)

<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="Parent_Child_Iframe._Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>.....

So How I can call getResultData () from Child.aspx.cs by clicking Button on the parent page.

The main difficulty is that I can't use Javascript to collect the information from TextBoxes because the task is more complicated and I can use only server methods.

View 1 Replies

Web Forms :: Opening A .aspx Page In A HTML Iframe Error / A Name Was Started With An Invalid Character

Aug 15, 2010

having trouble with opening a .aspx page inside of an iframe

currently have the following code

<body>

This is the PARENT FORM

<iframe id="childFrame" name="childFrame" src="TestDefault.aspx" width="100%" height="300" frameborder="0">
<p>Your browser does not support iframes.</p>
</iframe>
</body>
</html>

A name was started with an invalid character. Error processing resource 'file:///C:/Users/Alk/Desktop/IFrame/Test/Default.a...

<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
-^ which loads in to the iframe....

View 3 Replies

VS 2008 Concurrent Viewing And Logon ID?

Jun 7, 2010

I am a windows application developer doing a web application with VB.net and SQL 2008 for the first time.

I have developed a web application where users are supposed to view a file after selecting from a listbox. I then pick the users logon ID from windows then store in database and produce statistical reports later. It was working fine on my local machine till i deployed it on server to make it accessible on the intranet. The server OS is Windows 2008 Server and runs IIS. My issues are as follows,

1. The application is unable to store the user logon id from the client.
2. When more than one user uses the application, then there are errors but one user does not produce errors.

View 7 Replies

VS 2008 - PDF File Is Locked When Viewing Through Website

Sep 2, 2011

I have a web page in my project that views a selected pdf file. The problem is the file stays locked with the process w3wp.exe which I assume is the adobe file reader or something. How I can release this process after viewing it? Or another way of viewing it without locking the file?

Here is how I am doing it:

Code:

Dim File1 As String = System.Configuration.ConfigurationManager.AppSettings("Report")
Dim R1 As String = Page.Request.QueryString("r")
If R1 <> "" Then
Dim path As String = File1 & R1

[Code]..

View 1 Replies

MochaUI Window Loading ASPX Page In Iframe And Communicating With Window

Dec 17, 2010

I am hoping someone has experience with this, but I am loading a window from a link on my main page. The window loads an ASPX page via the window's loadmethod of iFrame. The aspx page has its own update panel on it and I was wondering how I can call the window's "spinner" / process indicator while the page is processing. I have looked at the documentation on some online information about it but I am not sure how to implement it.

View 1 Replies

Web Forms :: Iframe From Code Behind / Load A Dynamic iframe But It Cannot Visualize The Page?

Nov 30, 2010

i am trying to load a dynamic iframe but it cannot visualize the page.

this is my html code:

[Code]....

and this is my codebehind:

[Code]....

i am using a content update panel on the page but the div of the iframe is out of the content panel.

View 1 Replies

Session Expired Error When Viewing Reports Using ReportViewer Web Control In SSRS 2008?

Jan 13, 2011

I am getting "ASP.NET Session Expired" error when viewing SQL Server 2008 reports using the Microsoft ReportViewer web control. I found this article http://balanagaraj.wordpress.com/2009/09/25/session-has-expired-in-asp-net/ which suggests to use one worker process in IIS application pool, but that may affect performance, is there any other solution for this? I tried setting "AsyncRendering" to false already and that didn't work.

View 2 Replies

Print PDF From Page .aspx C# VS-2008?

Sep 13, 2010

I have a aspx page with Charts and DataGrips and I want to print all my page in a pdf just like it look in my page.

View 9 Replies

VS 2008 - Using JavaScript On ASPX Page

Oct 4, 2011

I'm not conversant with JavaScript, however I need to refresh the page in few seconds so I want to use this code-

<script type="text/JavaScript">
<!--
function timedRefresh(timeoutPeriod) {
setTimeout("location.reload(true);", timeoutPeriod);
}
// -->
</script>

<body onload="JavaScript:timedRefresh(10000);">
<p>

This page will refresh every 10 seconds. This is because we're using the 'onload' event to call our function. We are passing in the value '5000', which equals 5 seconds.

</p>
</body>

Now my aspx page is using Content and referencing masterpage, Page Language="VB"

When I try to add this code to a new page it works fine and page refreshes as desired, but on existing page it gives error-ErrorValidation (XHTML 1.0 Transitional): Element 'body' cannot be nested within element 'td' ....

View 7 Replies

VS 2008 - How To Make ASPX Page With Textboxes

Sep 21, 2010

I want to make ASPX page with textboxes and dropdown to insert the data into the database and Gridview to display all the data. I wnat some good designs, how can I make the page more attractive with just textboxes,dropdown ,buttons and gridview.

Do somebody have good aspx page, paste just the design here.

View 5 Replies

VS 2008 - ASPX Page Looses Viewstate

Jun 6, 2012

I have a web site with some aspx pages. There are occasions when a button on a page is clicked and instead of executing the code written on button click, the page simply reloads and losses values that was entered in various controls on the page.

This does not happen everytime, but randomly. This erratic behaviour is not restricted to any one page , but happens throughout the site. What could be the reason ?

View 2 Replies

VS 2008 - JavaScript Datepicker Won't Work Well In ASPX Page

Sep 14, 2013

code behind:

$("input:text.inputTypeDate").datepicker({
dateFormat: "dd/mm/yy",
changeMonth: true,
changeYear: true
});
});

ASP :

<asp:TextBox ID="txtDate" runat="server" Width="120px" class="inputTypeDate">
</asp:TextBox>

It works fine on page load, but when I click on clear button to empty textbox, it stops working.

View 3 Replies

VS 2008 - How To Copy ASPX Page In A Solution And Not Compile Errors

Oct 31, 2011

I have a VS 2008 solution. I need to copy an existing .aspx page and re-name it to something else (need to make modifications to that newly copied page). But I keep getting compilation errors saying that duplicate text boxes exist. Can't I have control on different .aspx pages with the same name? How can I do this elegantly?

View 4 Replies

Restricting Certain Pages -- Redirect On Every Page? Or On Master Page By Viewing Current Page In Url?

Feb 6, 2011

Per different user mode, some pages should not be accessible by users unless they have a valid session key.In your opinions -- would it be better to have a list of acceptable pages in the master page, and check if the current page is valid for the current user? Or handle this on every child page?I'm thinking master page, just want to hear what your input would be.

View 2 Replies

VS 2008 Updating Table Fails

Feb 12, 2010

why this update is failing? The table is connected to OK and there are appropriate values in the parameters to the subroutine, and yet the record in the table remains unchanged. I am using exactly the same code (with different parameters, obviously) to update another table and this continues to work fine.

Public Shared Sub SaveMathsSettingOptions(ByVal ID As Integer, ByVal Auto As String, ByVal Repeats As Integer, ByVal Weekly As String, ByVal ClassSheets As Integer, ByVal HomeSheets As Integer)
Dim con As New MySqlConnection(_connectionString)
Dim ret As String
Dim sql As String
sql = "UPDATE centres SET maths_auto = @maths_auto, maths_auto_reps = @maths_auto_reps, maths_weekly = @maths_weekly, maths_class_sheets = @maths_class_sheets, maths_home_sheets = @maths_home_sheets WHERE centreID = @centreID"
Dim cmd As New MySqlCommand(sql, con)
cmd.Parameters.AddWithValue("@maths_auto", Auto)
cmd.Parameters.AddWithValue("@maths_auto_reps", Repeats)
cmd.Parameters.AddWithValue("@maths_weekly", Weekly)
cmd.Parameters.AddWithValue("@maths_class_sheets", ClassSheets)
cmd.Parameters.AddWithValue("@maths_home_sheets", HomeSheets)
cmd.Parameters.AddWithValue("@centreID", ID)
Try
con.Open()
Catch myerror As MySqlException
'MessageBox.Show("Error Connecting to Database: " & myerror.Message)
ret = myerror.Message
con.Close()
Finally
con.Dispose()
End Try
End Sub

View 11 Replies

VS 2008 Login Fails After More Than 3 Or 5 Attempts

May 7, 2010

Language-Asp.net(c#) 2008 Sql Server 2005 well i designed a simple login form which checks the user and password with sql server but now i want to make it a little bit more secured basically i want if a user attempts wrong password with more then 3 /5 times. his id or username should be locked(which i will be running a update procedure) or he must be redirect to denied.htm and one more thing he should be able to get only n only 3/5 attempts whether he opens firefox browser,internet explorer ,safari,google chrome or any other browser

View 6 Replies

Web Forms :: CodeBehind Method From Aspx Fails?

Mar 1, 2011

I have the following javascript tag inside my aspx head

[Code]....

GetWithCdn is a public method inside the codebehind file. but this is not getting called when i run the page? can anyone tell me why this is happening. because same method worked on a different page.

View 1 Replies

Visual Studio :: Why Changes Made To A .aspx Page In The Designer Are Not Saved By 2008

Aug 18, 2010

im developing an asp.net website application but suddenly all changes i make to the page in the visual studio designer are not being saved for some reason. Every thing i do in the code behind file is saved with out any problem, also if i edit the .aspx file but in sourceview, the changes are saved, but if i drag a control from the toolbox onto the page designer and set some properties and then save, nothing will have been saved when i close and re-open the page, all changes are lost.

View 1 Replies

Why Changes Made To A .aspx Page In The Designer Are Not Saved By Visual Studio 2008

Aug 18, 2010

im developing an asp.net website application but suddenly all changes i make to the page in the visual studio designer are not being saved for some reason. Every thing i do in the code behind file is saved with out any problem, also if i edit the .aspx file but in sourceview, the changes are saved, but if i drag a control from the toolbox onto the page designer and set some properties and then save, nothing will have been saved when i close and re-open the page, all changes are lost. Its confusing and i have no idea why.Edit: also this happens on only one aspx file. All the other files edits are saved.[URL]

View 2 Replies

Is It Possible To Call Aspx Page Via HTTP Endpoint In SQL Server 2008/2005

Nov 22, 2010

Is it possible to call (Post to) a Method in a ASPX (Code behind) page via HTTP endpoint in Sql server 2008/2005.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved