VS 2008 Pass Parameter Value To The Report?
Apr 30, 2010I have reportviewer control on my page, i manged to add a parameter to my report, but i don't know how i can pass parameter value to the report.
View 3 Replies
Similar Messages:
C# - How To Pass A Parameter From SSRS Report
Jul 1, 2010I need to pass a value as a parameter from ASP.Net application to SSRS Report.How can i do this? .
View 3 RepliesSQL Reporting :: Pass A Parameter Into Report?
Aug 27, 2010I looked all over the forums, spent about a day on it, found numerous people having similar problems passing a parameter, but all the solutions I found so far were partially incomplete or incompatible to my project. I tried using a few of the "solutions" and they generated exceptions. I'm using straight ASP.NET so far with no c#. Is there a way to do it without code behind? I'm certain that if you provide a complete working example that others in the future will be very grateful as well. Here is what I have thus far:
I used studio to create an .ASPX web form, and I used the report wizard to create a .RLDC file on the .ASPX page. When I execute it, it works! Beautiful... Now how do I pass it a parameter? So this is what I have below (which works), but I want to pass in a single int32 parameter to the stored procedure usprptGetData in which it is based.
[Code]....
I tried adding this code below and it generates exceptions:
[Code]....
SQL Reporting :: How To Pass In A Parameter To Rdlc Report
Mar 17, 2010I'm having a very difficult time figuring out how to pass in a parameter to my rdlc report.
1) On the report, I went into Report > Report Parameters and added a parameter.
2) I tried writing some code (vb) on the page_load event to pass information to this parameter. I have the following:
[Code]....
When I run the report, I receive the following error: "The 'MuniID' parameter is missing a value"
Am I on the right track? give me some direction on what else needs to be done?
SQL Reporting :: Report Viewer - Show To Pass The Parameter Value Subreport Filter
Jul 21, 2010Am using northwind sql server database to do a test. Using customer, order table to show master detail report. Customerid is the reference. After Create a Parameter to run the subreport. Some how i cant able to refernce the master, detail. so it will show all the records in the detail section instead of showing relevant customer id details from the orders table. pls see the picture belowMainreport - > call the subreport parameter. but i miss with one more step to finish the report "Filter Expression", i guess. how to pass the parameter value subreport filter.
Customer.aspx
[Code]....
customer.aspx.cs
[Code]....
Crystal Reports :: Pass Parameter From QueryString To Report Viewer Control
May 7, 2015protected void btn_showReport_Click(object sender, EventArgs e) {
try {
ReportParameter Comp_Name = new ReportParameter();
Comp_Name.Name = "Comp_Name";
ReportViewer1.ProcessingMode = ProcessingMode.Remote;
ReportViewer1.ServerReport.ReportServerUrl = new Uri("http://dell-pc/ReportServer");
ReportViewer1.ServerReport.ReportPath = "/Companies Report/Companies";
[CODE]..
the above code is in "reportpage.aspx" when I click on it the company report is shown according to the parameter "Comp_Name"
I want to show report in "reportpage.aspx" according to parameter name passed from another .aspx page, how to do that?
SQL Reporting :: Pass Report Parameter From Aspx Page To Another Aspx Page With Rdl Report?
Feb 8, 2010have a page called: TagUpdateReportPalletDeadSurplus1.aspx. On this page I have a link to a second page calledptPalletSurplusAndDeadDirectFromURL.aspx with a ms reportviewer report.I pass a parameter called ConfirmationID to the second page with a query string.Here is an example of the query string:http://localhost:4132/StateTag/rptPalletSurplusAndDeadDirectFromURL.aspx&rs:Command=Render&ConfirmationID=2010-02-08-12:27:37Do I have the correct syntax in the query string?How do I get the second page (rptPalletSurplusAndDeadDirectFromURL.aspx) to accept the parameter and pass it to the rdl report?
View 4 RepliesDataSource Controls :: Using Visual Studio 2008 Query Builder And Am Trying To Pass A Value To A Parameter That Uses The IN OPERATOR?
Jun 3, 2010I'm using Visual Studio 2008 Query Builder and am trying to pass a value to a parameter that uses the IN OPERATOR.Here is my sql from qb:
SELECT COURSE_TITLE, INSTR_NAME, ADMIN_UNIT
FROM vwHRIC_EC_ContractSummary
WHERE (ADMIN_UNIT IN (@ADMIN_UNIT))
The trouble I am having is that if the parameter @ADMIN_UNIT contains more than one value such as (8X, CV) that the query doesn't return any data. If I run the same query with only one value such as (8X) it works fine.I have tried different formats like (8X, CV), ('8X', 'CV'), (8X; CV) but none have worked.I ran this same query in SQL Server Management Studio and and it returns data no problem but can't get it to work in Query Builder for my aspx application.Does anyone have any experience with this problem and how did you correct it?
Set Value In Report Parameter (report Viewer In Remote Mode)?
Dec 14, 2010I have already created a report in SSRS 2008. I'm using the Report Viewer to view it. I have one Report Parameter which is a list of usernames. I'd like to programatically select a particular value from that list.
So for instance, user: sdsmith goes to the page. The webpage will grab that username, check it against the list in ReportParameter1, then set the value of ReportParameter1 to sdsmith if it's found in the list.
SQL Reporting :: Opening SSRS 2008 Report In VS 2010 With Report Viewer
Jul 30, 2010[Code]....
C# CODE :
[Code].... Opening SSRS 2008 report in VS 2010 with Report Viewer?
Report Viewer From SQL Reporting Services In VS 2008 Report Control?
Jan 8, 2010Report viewer from SQL reporting services in VS 2008 report control If I create a new report in VS 2008 they have a .rdlc extension and work correctly.
I have some reports that I was using in SQL reporting services. Extensions are .rdl and want to get them to work with VS 2008.
I copied the rdl files and the .rdl.data files over to VS 2008 (SP1) project but when I go to select the report in the control it does not see the file (I assume it is looking for a .rdlc file)
I tried rename the file to .rdlc and loaded the file up and got
The report definition has an invalid target namespace [URL] which cannot be upgraded.
I see this
[URL]
[URL]
It says
"RDL files are fully compatible with the ReportViewer control runtime. However, RDL files do not contain some information that the design-time of the ReportViewer control depends on for automatically generating data-binding code. By manually binding data, RDL files can be used in the ReportViewer control."
But the link for how to manual bind the data is broken.
Vwd 2008 Express Sp1 Tool Box Disappeared After Installing Report View 2008 Add
Jan 6, 2010I am new to vwd. I installed vwd express edition 2008 with sql express 2008 in xp sp2. After this i installed report view 2008 addon for vwd express. After the installation i noticed that there is no toolbox in my vwd. Before it was there.
View 1 RepliesSet Parameter In Crystal Report?
Mar 25, 2011I have create a web page where user enter two date and the report will all required data in the report which are in between two date. It works properly. I want to show two dates entered by the user in report header. How can I do it?
View 1 RepliesHow To Set Parameter In Crystal Report
Jan 10, 2011[URL]
asp .net will automatically have a textbox or datetimepicker to input However, after input and refresh report, the textbox and submit button disappear
How to show the textbox and button again? And the function in the post not work after passing datetime value toshortdatestring() from calendar control
How Can Pass Parameter In C#
Feb 9, 2010[Code]....
View 3 RepliesC# - How To Pass Parameter In CSS
Feb 1, 2011i have a grid with an image column, i want to change images based on data source. if data field for a row is 2 then image will be *.gif and if it is 3 then will be different so it is not fixed that which type of images we will have so i want to do "if..else" on css because in that case we can easily change images on css. i don't want code on code behind file.
View 2 RepliesHow To Pass A Url As A Parameter
Apr 3, 2010'm constructing a url which in itself has a url, and both are parameterised.E.g. string postUrl = "target_page.aspx?url=post_page.aspx?p1=9&p1=9&post_type=1he url and parameters in bold are the inner url so when i refer to querystring parameter 'url' I want it to bring backurl=post_page.aspx?p1=9&p1=9 and not url=post_page.aspx.hat should I encode and to ensure this comes out correctly
View 1 RepliesCan Pass Parameter In Tag's Src
Mar 26, 2011i want to pass parameter in image tag's src.
i send an image in email, for email tracking but i want to pass parameter in image tag's src.
message.Body = "<img src='http://test.com/test1.aspx?imageID=defaultimg.jpg&custID= + System.DateTime.Now + &campID='32434'/>";
C# - Passing Multiple Parameter To Crystal Report?
Feb 28, 2011I'm working on Visual Studio 2008 and SQL Server 2008, language C#
Multiple parameter passing in crystal report in asp.net. I have two parameter @accountnumber and @customerid at time. I can only pass one parameter to my.
[Code]....
SQL Reporting :: Set RDLC Report Dates As Parameter
Jan 3, 2011Can i set dates [From date and To date] as parameter in my RDLC report. Report generating using sql datasource .. But i want to pass dates as a parameters.
View 1 RepliesSQL Reporting :: Set Report Parameter Value From The UI Page & Generate?
Feb 25, 2010How to set report parameter value from the UI page to My Report.
I can able to launch the report list in my ui page. I can open the reports which are there in my report server. I am generating Report by clicking the button am storing report server URl in string & Redirecting that URL by clicking button in below way,
strcompleteUrl = "My ReportServer Name" + Server.UrlEncode(strFolder) +"/"+ "Availble+files" + "&" + strcompleteUrl + "rs:Format=PDF" ;
Response.Redirect(strcompleteUrl);
When I am launching the report from UI page I need to pass report parameter value .. I am generating my report based on Fileyear.
How to pass the fileyear to my report url. ??
My report parameter values are coming from my stored proc. How to assign that stored proc value to my CompleteURL.
Php - Pass Dynamic Value Via Parameter?
Feb 2, 2011I am using this plugin [URL] I am using this code:
var uploader = new qq.FileUploader({
// pass the dom node (ex. $(selector)[0] for jQuery users)
element: document.getElementById('file-uploader'),
// path to server-side upload script
action: '/server/upload',
params: {item1:$('#txtName').val() }
});
Now when the request is made to server always the blank value goes to server instead of what the actual value is (I changed the value of textbox after the page has been loaded). I think the first default value of textbox is passed in this case. My question how can I pass the dynamic value of textbox to server?
How To Pass Parameter To Javascript
Mar 20, 2010I need to pass an url from asp.net load_page to flowplayer javascript function here:[URL]
View 2 RepliesC# - How To Pass In A Method Name As A Parameter
Dec 10, 2010I've just noticed I'm repeating a lot of C# code in my ASP.NET application so want to create a generic method. I have a series of private methods like this:
[Code]....
So, I want to replace DB.MyRepeatedCall, chtMyRepeatedChart and pass them in as parameters to a generic function. Is that possible? I have many charts on my form that take the same number of parameters.
UPDATE
Following Frederik's solution I have done this:
[Code]....
I am calling the function with this command:
PopulateControl (chtEquityCurve, DB.GetAccountBalances());
I get this error in the intellisense:
No overload for method 'GetAccountBalances' takes 0 arguments.
How To Pass Dropdownlist As Parameter
Feb 13, 2010i wants to pass table, two fields and dropdownlist as parameter to
to construct a user defined function in class module, to retrive keycode,keyname from a table
iam wokring in csharp code
