VS 2010 - Theme / CSS Not Being Recognized Properly?

Jul 27, 2011

I've just started a new website, downloaded a free theme from some website and I'm trying to implement that into an ASP.NET web application.

I simply copy/pasted the CSS and I'm now bringing in parts of the webpage bit by bit, starting with the header and title, then a menu bar, a ContentContainer and finally the footer.

When in the VS designer the page looks fine. The background image for the header shows up, the menu bar has its own designated space and separate background image, and the content is separated from the rest by a wide margin.

When I run the web application however, it looks nowhere like that in my browser. The header and menu background images are gone; the margin around the content is gone, etc. It seems about half the style elements are intact while the other half is somehow missing.

Things I've done and tried:

Confirmed that the correct CSS file is used for the master pageRefreshed the page a couple times, even cleared the cache and used different browsers to make sure that it's not using an old cached version or somethingClean solution / Rebuild / Build, etc...Restart VSShout at it

This problem seems to pop up from time to time, I've never been able to figure out what causes it and it usually resolves itself... This time it seems persistent though, nothing fixes it.

What could cause this? I am hesitant to say there's errors in the CSS file for two reasons:

- I have ReSharper 6 installed which checks CSS files for errors, warnings, etc, it does not find any
- It works in the VS designer!!!

I suppose I could post the source but the CSS is quite large so that would be like searching a needle in a haystack. Also, because it works in the designer I feel there must be something else going on...

View 6 Replies


Similar Messages:

VS 2010 - String Was Not Recognized As Valid DateTime (Error With Tt)

Sep 1, 2011

Why I get an error when my time is PM? The MSDN doc says tt works with AM/PM.

Error I get is: String was not recognized as a valid DateTime

Code:
sDeadlineDtTm = "9/3/2011 1:30PM"
Try
dtDeadlineDtTm = DateTime.ParseExact(sDeadlineDtTm, "M/d/yyyy H:mmtt", System.Globalization.CultureInfo.CreateSpecificCulture("en-US"))

[Code] ....

View 2 Replies

Can Use Custom Theme In Share Point Server 2010

Jun 8, 2010

I wanted to change the look and feel of my share point server 2010 site. I have use office Power font to create my custom theme. .Thmx file. I am just wanted to know how to use the custom style to use in share Point server 2010. Like earlier we did in share point serve 2007 to create a theme folder. I want a fix solution. Like if i wanted to deploy my theme into server 2010. I will not get trouble.

View 1 Replies

VS 2010 Templates And Update Panel - Incorporate Jquerry - Not Functioning Properly

Mar 21, 2011

It was recommended to us jQuery to resolve some of the issues that I am having. I have been trying to incorporate jQuery but it is not functioning properly. First I have a template:

Code:
<html xmlns="[URL]
<head id="head1" runat="server">
<title>Inventory Management</title>
<link href="Inventory.css" rel="stylesheet" type="text/css" />
<script type="text/javascript" src="jquery.js"></script>
<asp:contentplaceholder id="phjQuery" runat="server" />
</head>
<body id="masterbody">
<form id="form1" runat="server">
<asp:ScriptManager ID="smInventory" runat="server"></asp:ScriptManager>
<div style="text-align:center;">
<table style="width:100%" border="0" cellpadding="2" cellspacing="0">
<tr>
<td class="xxlargeBold" colspan="3">
Inventory & Order Management<br />
<hr />
</td>
</tr>.............

View 6 Replies

VS 2010 - Ajaz HTML Editor Won't Work Properly When Deploying On Server

Jul 19, 2011

I am having a little problem with AJAX htmleditor, it works fine when testing on localhost, but after deploying it on server it wont work properly.

I have 3 different txt source for the htmleditor, and sometimes the texteditor just gets blank and even the toolbar of the editr disappear and after that doesn't matter which source i select the editor stays blank unless i reload the page.

Code:

'======================================= LOAD xxxxxDATA =====================================
                'Open a file for reading
                FILENAME = Server.MapPath("~adminexxxxxxexxxxxTemp1.txt")
                 'Get a StreamReader class that can be used to read the file
                 objStreamReader = File.OpenText(FILENAME)
                 'Now, read the entire file into a string
     
Code].....

View 5 Replies

DateTime.Parse("07/23/2010")Gives "String Was Not Recognized As A Valid DateTime."?

Jul 23, 2010

DateTime.Parse("07/23/2010")Gives "String was not recognized as a valid DateTime."

View 10 Replies

.net - Changes To Xml File Not Being Recognized?

Apr 8, 2010

I read a xml file (myConfig.config) and provide it as an input to a CLR method. When I make changes to this xml file, it doesn't seem to be recognizing it. When this line throws an error, I always see the first version of the file as a part of the error message.In the config file properties, I have set Copy to Output Directory as Copy always, but it still doesn't seem to work.

View 2 Replies

HtmlHelper Not Recognized In Runtime?

Aug 24, 2010

I am developing a Web app that is based on ASP.NET 3.5, and i added some page from ASP.NET MVC, everything is ok, until i use the "HTML" helper class, then the page is not being able be render, because this is not recognized.

For Example : Html.BeginForm() => this is not recognize as a method

But if i used "System.Web.Mvc.Html.FormExtensions.BeginForm", which is a extension method itself, it work fine.

Environment : ASP.NET MVC 2 and ASP.NET 3.5

View 1 Replies

MVC :: Viewbag Is Not Being Recognized In Project?

Mar 10, 2011

I am trying to use ViewBag and in my Controller I am having the code [Code]....

View 3 Replies

MVC :: Application Not Recognized By Web Server?

Sep 7, 2010

I uploaded my MVC2 application to my web hoster, but the web site does not run. When I request www.mysite.com, I just see the directory listing page of the root directory, and the web app does not execute. I don't see any error message, though. A normal Web Forms page works fine. Why is this?

The web server is running ASP.NET 3.5 SP1. It does not have the MVC assembly installed in GAC, so I followed these instructions to upload the MVC assembly with my page: http://haacked.com/archive/2008/11/03/bin-deploy-aspnetmvc.aspx , but to no avail.

View 9 Replies

String Was Not Recognized As A Valid DateTime - How To Fix It

Apr 30, 2010

i have an error is follows..

String was not recognized as a valid DateTime.

i am using three controll for getting date..

dropdownlist1 for getting day..

dropdownlist2 for getting month..

textboxx for year..

the code is..but i cant defined solution..

DateTime dt1 = DateTime.ParseExact(fromString, "MM/dd/yyyy ", fculture, DateTimeStyles.NoCurrentDateDefault);

View 9 Replies

String Was Not Recognized As The Valid Boolean?

May 15, 2010

FeatureEvents.bit_Activate = Convert.ToBoolean(collection["bit_Activate"]);

bit_Activate is checkbox ,how would i convert it to boolean above,collection is coming from the formcollection variable

View 4 Replies

HTML Element Not Recognized In Code-Behind?

Mar 12, 2010

I just wrote this into my WebForms .aspx:

<span id="GenerateChartButton" runat="server"></span>

I went to the code-behind, and typed this:

this.GenerateChartButton

and it's not recognising that I added the span to the page. Is there something I need to do to make this happen? I have been working in MVC lately, so I haven't had to worry about the relationship between the page & code-behind in a while, but I can't remember any tricks that I had to perform to reference a HTML element in my code.

View 1 Replies

Visual Studio - ASP Controls Not Recognized

Jun 12, 2010

I just installed the release version of Visual Studio 2010, and it looks like there's something wrong with the standard ASP.NET server controls. When I create a basic server control, such as a TextBox, the editor underlines it in green and says (I also get no intellisense for ASP.NET controls): Element 'TextBox' is not a known element. This can occur if there is a compilation error in the Web site, or the Web.config file is missing. The web site builds fine, and the Web.config file is not missing:

<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.0" />
</system.web>
</configuration>

The controls work just fine in the code-behind, and they function correctly when I run the site. Is there some configuration problem here?

View 1 Replies

Web Forms :: Controls Not Being Recognized At Runtime?

Jan 14, 2011

I created a new page in an existing project. The existing pages are still good, but the new page is having problems at runtime. The problem is that controls are not recognized and throw a "object reference not found" error. I even tried Page.FindControl and that didn't work either. This is only happening with this page. The controls are recognized at design time, and are not recognized only at runtime.

The controls were copied from a regular Web form into a content form with a master page. They worked fine when in the regular web form. Could that be the issue?

I tried creating a new page and moving the controls over, but that didn't fix the problem. I also tried deleting the designer file and recreating it (using convert to web application) but that didn't resolve it either. I'm out of ideas here. Here is the page directive and the first control that is not recognized.

<%@ Page Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="default_grid.aspx.cs" Inherits="TestItemDevelopment.default_grid" %>
<asp:Content ID="Content4" ContentPlaceHolderID="mainContentHolder" runat="server">

View 2 Replies

IsAuthenticated Not Recognized On Rewritten Pages?

Jan 2, 2010

I'm using the UrlRewriting module on my site and I can't seem to get HttpContext.Current.Request.IsAuthenticated to return "true" on any rewritten pages.

If I go to my home page (http://localhost/default.aspx) I get "true", but if I go to something like (http://localhost/contactus) I am always getting "false".

also, for a direct example, I have an edit bar that is supposed to appear to anyone who is authenticated. The if statement fires in the Page_Load method

If HttpContext.Current.Request.IsAuthenticated Then _
Me.FindControl("EditBar").Visible = True

I have also tried putting this in the page load event

Response.Write(HttpContext.Current.Request.IsAuthenticated.ToString)

Every page that is rewritten says "False" where pages that are not rewritten say "True".

View 3 Replies

String Was Not Recognized As A Valid DateTime?

Oct 27, 2010

The error points to this line: DateTime tmpDate = Convert.ToDateTime(lblCalendarDate.Text).AddDays(-7);

I know it will be something to do with I have the date as a string in one method and the date as date in another method but I don't know how to rectify this seeing as I'm knew to ASP.Net & C#. Here is the code:

[Code]....

View 6 Replies

Web Forms :: Attribute Not Recognized 'setProcedure' ?

Aug 6, 2010

[Code]....

Attribute not recognized 'setProcedure' ?

View 2 Replies

OO Issue - Class Objects Not Recognized?

Apr 9, 2010

I have an assembly that i have built with a linq to SQL item, a web reference and a class that brings it all together.I build the project and it all seems fine but when i reference the object from another project the web reference and linq objects are available but the class isnt.

View 2 Replies

Nested Repeater Not Being Recognized In Code Behind?

Dec 17, 2010

I have a nested repeater set up but the child repeater control is not being recognised in the code behind. It's not even being added to the designer file. I've tried this on an aspx and an ascx page but both gives the same problem.

<asp:Repeater ID="RepeaterParent" runat="server">
<ItemTemplate>
<asp:Repeater ID="RepeaterChild" runat="server">
</asp:Repeater>
</ItemTemplate>
</asp:Repeater>

with this on the page the code behind only recognises the RepeaterParent but not RepeaterChild.

View 2 Replies

Commas Not Recognized In File Exists?

Jul 21, 2012

I have a .net aspx project done with VS 2008 using the .Net 2.xxxx framework. This ASPX application is deployed on and 4 different 2003 Server boxes. 3 are running in total beautifully. In the 4th box is my issue. I do a FILE.EXISTS conditional test looking for case file pdf's. These case numbers are structured as such 2012-C-0421,001,0008.PDF

Please note the comma's used in the path. 3 of the 4 servers in court houses recognize the path to the pdf WITH the commas in them perfectly and the FILE.EXISTS works 100%. On the fourth box (same config we THINK) the exact same FILE.EXISTS does not return a hit even though we see the document sitting in the folder via explorer. IF we remove the commas and make it 2012-C-0421001008.pdf all is fine and document is indeed discovered with the EXISTS.

WHY on this one server does the original ducument path not function. We can not ask the court houses to change the way they store their documents so I need to make this work like the other 3. Again... same version..same .net framework... same OS (2003 server)

View 4 Replies

Web Forms :: Web Controls In Code Behind File Not Recognized?

Aug 3, 2010

I downloaded iTracker to get started doing some web development with ASP.NET. I don't understand why in the code behind file, the standard web controls are not recognized.

For example:

This is the ASPX File ...............

<%@ Page Language="vb" AutoEventWireup="false" MasterPageFile="~/ITracker.Master" CodeBehind="Details.aspx.vb" Inherits="dfs.ITracker.Details"
title="Untitled Page" %>
<asp:Content ID="Content2" ContentPlaceHolderID="cphTitle" runat="server">
<asp:label ID="lblPageHeader" runat="server" CssClass="PageHeader"></asp:label>...

View 6 Replies

C# - Some Aspx Controls Are Not Recognized In The Code-behind Files

Jul 19, 2010

I noticed that some aspx controls were not being recognized by intellisense, and when I tried to compile, I got errors stating that the controls basically didn't exist.

After a lot of tinkering, I realized that the .aspx.designer.cs file was missing for several .aspx files.

What is the best way to re-create the files?

View 2 Replies

Web Forms :: Variable Declard In Webform Not Recognized?

Aug 13, 2010

I'm new in ASP I was watching a video which explains how to add a webform and declar a variable

[Code]....

but it says <%var1%> it's not declard when I run it without debugging .

View 2 Replies

MVC :: Post Actions Not Recognized On Production Server?

Mar 9, 2011

I recently deployed a MVC app to our production server for some testing and it doesn't seem to recognize any of the posts. For example, I may have the following method:

[Code]....

However, nothing happens. Everything works on my local machine when testing. I've even tried placing a simple Response.Write("Anything happening?") inside the method, removing all other code, and nothing is printed to the screen.

View 10 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved