I work on an asp.net web application (3.5) with Visual Studio 2008. There are a lot of files in this project (approximately 500 aspx files) and I think I can remove some of them.
My question is: Is there a way to identify the useless files, I mean, the files that are no longer used in the project (like an image, aspx, etc.); by using Visual Studio or an external tool?
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work).
In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
VWD 2010 Express.
We have shared CSharp classes put into a shared folders for re-use. Now I want to add those classes into my project by creating a new folder:
1) Right click the solution,
Add -> New Folder
Give it a new, eg. SharedClasses
2) Right click the new folder "SharedClasses"
Add- > Existing Item...
Browse to the "Shared Folder", include those shared classes. But those files are added physically into the folder "SharedClasses" rather than a reference. How do I just add a link to those shared files? Since these files might be modified from time to time, I don't want to delete and add those file frequently.
I am using VS2010. When I am building a release for a WinForms Applicaiton, I can see some .xml files relevant to project in the bin elease folder. The .dll (third party component) has been referenced in the References folder of the project for eg. Rebex.Net.Ftp and in the properties window the Source Path is
C:Program FilesRebexFile Transfer Pack for .NET 4.0FTP SSL for .NET 4.0inRebex.Net.Ftp.dll In the above mentioned source path directory there is an Rebex.Net.Ftp.xml which gets pulled across to the release folder as well. I couldn't really get my head around where this can be referenced so that it puts this .xml file in the release folder of the project when I do a build?
My main problem is, when I created a setup project for this application, I can't get this file included in the installation pack (after installing the .msi file). I get the Rebex.Net.Ftp.dll but not Rebex.Net.Ftp.xml file. I tried all the options in the Project Output except including the "Source files" which I dont want to. how to include the .xml files in the setup installation pack, ie., if there are properties I am forgetting to set or something like that?
I have been asked to do some work on a website. I downloaded all of the files and chose "open website" in Visual Studio. In the picture below you can see the file structure. When I run the project I get some errors such as "could not load type 'AdminSite.Partner.Listing" or "file project/adminmaster.master does not exist'. Now, those files are indeed there. I have noticed that within the Admin folder and the Home folder there are compiled DLLs in the bin folders. Also, there are project files within each of those folders. I've tried opening the project files and the projects only encompass the files within each of the Admin and Home directories respectively. I'm just wondering what the best way is to set up this solution. As I've done so far, by opening it as a web site, why is it not seeing the DLLs in the bin folders when I run it? Do I need to reference them somehow?
View 5 Replieshow I can enable .asp files in a simple VS2010 Website project? For example: Start VS2010 Click "File/New Web Site..." Accept defaults Add an html file called "Test.asp" Attempt to open Test.asp (debug project with that file active) and you get the following error: "This type of page is not served. ... is not server because it has been explicitly forbidden. The extension '.asp' may be incorrect " SO, HOW DO I EXPLICITLY ALLOW IT? VS2010 is using the ASP.NET Development Server....
View 2 RepliesThis is one thing that's long driven me nuts. Sometimes I want to search the entire project for some string, and about a billion matches occur in JavaScript files, making the search unusable. Is there a way to specify file types to include in the search?
View 2 Repliesim facing problem to access classes out side my project folders. for example if i want to use some methods from store.vb file inside my project i get error : Name Space is not defiend, i have tried all ways such as import sdf.ITracjer.Data
[Code]....
i can't fetch the Store Class Methods or Function because its out of project directory, as its showin in image.
can't find the Clean project under VWD2010, however, my project still works fine using the Build only, is this an upgrade?
View 2 Repliesis it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
I have installed SQL Server 2008 express, reinstall it with advanced services, uninstall TFS 2010 and tries to reinstall it but fails. It doesn't want to completely uninstall.
So I'd like to clean everything by hand (deleting registries, folders) but can't find any info. I have deleted install directory but installer still memorized that TFS is installed.
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Replieswhen i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
View 13 Repliesi install url rewrite iis module to my computer i want when i press f5 in visual studio my project work with url rewrite how can i this?my web sites is not seeming in iis.
module=http://www.iis.net/expand/URLRewrite
is it possible to open aspx files directly by clicking on them like html files without from within visual studio or visual web dev?
View 2 RepliesJust as the subject says, my VS'05 installation hangs when trying to create a new website. I even installed a fresh version of VS08 along side '05 and '08 is doing the same.
View 9 RepliesI have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
I have a Sitecore/ASP.NET projects that I'm developing. Today at some point I inadvertently hit the "Clean" option in the solution context menu. It took me a while to figure out why my site was hopelessly broken. Turns out Visual Studio went ahead and deleted several required assemblies from the in dir which are not part of my project.How can I prevent this from happening again?The odd thing is that it did NOT delete everything... just a small handful. It left many that are not directly referenced by my project. This makes me wonder exactly what this feature is supposed to do? Is there some sort of file flag I can set? None of the files are set to read-only. If you're interested in details, the following got deleted:
Sitecore.Analytics.dll
Sitecore.Client.XML
Stimulsoft.Base.dll
Stimulsoft.Report.dll
Stimulsoft.Report.Web.dll
Stimulsoft.Report.WebDesign.dll
Telerik.Web.UI.dll
UPDATE: You know what... I guess what I'm really more interested in here is WHY Visual Studio is leaving most of the files and only deleting these specific ones.
Can i run a project in Visual Studio 2005 that is created in Visual Studio Team Edition 2005
View 1 RepliesI recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
Class file Conflicts in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files is preventing me from building the solution. Even though I try emptying out the folder, each time Visual Studio starts the build process, it brings in the class file in to the temp folder with the same folder name. If I restart the machine or leave it overnight, project build without error. Is there anyway to tell Visual studio to delete/ignore/clean any lingering class files that could be in the temp folder?
Clean solution option in VS doesn't work either. Class file in conflict are from the App_Code folder.
I don't see Empty Project option in Visual Studion 2008 under NEW > Project?
View 1 RepliesI basically want to do a reverse 'search in all files', so it returns files that don't contain "keyword".Does anyone know how to do this, or the regex used, etc?
View 1 RepliesI've inherited a bunch of code that has server script inside of .htm files.
On IIS, a handler mapping pumps.Htm pages though the asp.net engine.
Unfortunately, visual studio doesn't notice that they should be treated as code.
Is there any way to make VS treat .Htm files as code/aspx files?
My Visual Studio 2005 program doesn't open CSS files properly - when I open them in VS, it opens them as a text file. It is annoying because if I do something wrong, it doesn't show up the error and I have to sift through it all to try and find out what is wrong. Plus it doesn't show up the hints for the attributes.
View 5 Replies
