I have upgraded to VS2010 recently. Now VS2010 is not opening i get an messg box displaying. Microsoft Visual Studio has encountered a problem and needs to close. We are sorry for the inconvenience. It automatically gets restarted and displays the same message. I have re-installed VS more than 3 times.
View 1 RepliesAnyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 RepliesI have first installed VS2005 and then installed VS2008. After installing, whenever i create a solution in VS2008, i am able to create it properly. if i double-click the solution file, i am able to open the project. Recently i had a problem in my IIS 5.1 and i uninstalled it and the installed it again. After doing that whenever i try to open a VS2008 solution file, i am getting the following error The selected file is a solution file, but was created by a newer version of this application and cannot be opened.". I even tried creating a blank solution using
File->New->Project->Other Project Types-> Visual Studio Solutions-> Blank Solution.
I then added a new project to this solution. I closed the solution and again when i double-click on the newly created solution file i am getting the same error as previous one. I found some solution in the net, tried that and didn't work at all.
Can I install Microsoft Visual Studio 2010 Service Pack 1 in Microsoft Visual Web Developer 2010 Express?
View 1 RepliesI need to write a paper on the comparison between (Microsoft Visual studio 2005 to develop web applications using asp.net) and (visual basic and Netbeans to develop j2ee applications using java).I need suggestions for good webpages,journals or documents which can help me out here. I have to write at least 1500 words
View 1 RepliesMicrosoft Visual Web Developer 2008 Express Edition not possible to open Visual Studio?
[Code]....
I currently doing a website that require to have a report for higher management, but i cant seem to have the crystal report tool in my MS Visual Web Developer.
View 2 RepliesI am a student of HLC, I am learning Visual Basic, they sended me lots of books and a CD with Microsoft Visual Studio 2008 Professional Edition. I have problem with installing it. There is the error;: "Setup Failed. Use the following links to research the source of the failure: There were errors during setup. Although the components were installed successfully, some setup errors were detected. View error log
For information on known setup issues, see the Microsoft Visual Studio readme file, readme.htm, located at the root of the installation source. For Knowledge Base articles on Visual Studio setup issues and solutions, see KB article 319714, HOW TO: Troubleshoot Visual Studio .NET Installation, at [URL]. To find help from other Visual Studio users, try the following newsgroups:
Visual Studio Setup
Microsoft Product Support
For details about this setup failure, see the setup
log files."
and
"The following component failed to installl: Microsoft Document Explorer 2008. The following components were not attempted: Microsoft Visual Studio Web Framework 3.0 Framework 3.5" and many other componetns. I have got Windows Vista Home Basic SP2 with 1.00 gb RAM and 2.00GHz. I all ready asked my tutor but he don't know how to make it work. There is no information on the web about this problem.
I just migrated myDocuments folder to a new laptop (windows 7, 64 bit). The visual studio project WAS working on my desktop computer (windows XP pro).
Runtime error is:
ASP.NET runtime error: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f
It references the config file, so I am looking to see if I need to add something in there or what?
When i was building my project in my local machine it was giving me the below error...."Error 1706:An installation package for the product Microsoft Visual Studio 2008 Shell(integrated mode)ENU cannot be found!!!Try the installation again using a valid copy of the installation package 'vs_shell.msi'"
View 1 RepliesWe have developed apllication in Microsoft VS 2008 and when we opening this same application with Microsoft VS 2010. Then it's asking to convert.
So can anybody tell me what it is converting exactly. Means it's open application in Microsoft VS 2010 and running properly also. But i am understanding whats happning while converting.
In Microsoft Visual Web Developer 2010 Express, Edit->Quick Find mean item, the "Quick Find" item, everytime I have to select "Find In Files" again, how can I set "Find In Files" as default?
View 3 RepliesI am building master page in visual studio 2005 and I have placed contentplaceholder into between <head> and </head> tag of master page, but in source view of visual studio 2005, I am getting error that says "unrecognized tag prefix or device filter" how do i get rid of this error or is this bug in visual studio 2005
View 2 RepliesI am having an issue in VS 2010 trying to get even the default ASP.NET Web Application to run in Debug mode. I get the error:
"Unable to start program 'http://localhost:1443/Default.aspx'.
The system cannot find the file specified."
I am stumped here and cannot find anything out there with this error.
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
When I open up a web application project, VS attemps to configure IIS to open the project. This is fine, but typically there is already an application in that place. For example, we have apps that run at the root, and various feature branches would map to the same virtual application. Even though VS can *create* the application, it won't modify an existing one.
For example, lets say IIS has:
/MyApp
During my day I mightwant to work on MyApp from:
c:ranchesfeature1MyApp
c:ranchesfeature2MyApp
c:archive
elease102MyApp
c:production
elease204MyApp
If I delete /MyApp, then VS will create it when I open any of these projects, but it will never modify /MyApp to point to my current project. So first thing is: Is there any way to change this behavior?
Second question is, is there no way to open a web application project w/o having a properly backed IIS application setup? I know you can have the projects run off the casini webserver, but all of our applications target IIS and rely on inherited web.config settings. /MyApp is expecting to find config values that exist at /Web.Config and a login page for the entire system at /Login.aspx. Trying to run /MyApp in casini fails immediately because of these dependencies.
But what if I am just doing a code review. I don't care to browse the site, I just want to open the project. Is there no way to tell VS to just open the project and ignore the fact that IIS isn't setup right?
I have a project in VS2008.Net3.5 with a Module1, form1 and form2.
[CODE]
Imports Microsoft.VisualBasic
Module Module1
Public frm1 As form1
Public frm2 As form2
Sub Main()
frm1 = New form1
frm2 = New form2
Application.run(frm1)
End Sub
'A menu sub
Private Sub menuGotoSpecification_Click(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles menuGotoSpecification.Click
frm2.Show()
End Sub
End Module
Public Class form1
Private Overrides Sub Show()
LoadData()
MyBase.Show()
End Sub
End Class
Public Class form2
Private Overrides Sub Show()
LoadData()
MyBase.Show()
End Sub
Private Sub btnDone_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDone.Click
frm1.show()
frm1.refresh()
Me.Hide()
End Sub
End Class[/CODE]
Question:
At the beginning I am opening form1 from sub Main(). Now from the menu I am openning form2. In form2 I am clicking Done button to hide form2 and go back to form1. It works fine in the 1st trial. Keeping form1 open for the 2nd time, I opened form2 from the menu. Now when I Click the Done button 2nd time it just hides up everything. Form1 does not show UP. It just exits the whole application. But in my btnDone event, I have frm1.show().
When clicking on design view button - Received error "Microsoft.VisualStudio.Xaml" has failed to load properly(GUID = {E58C2A8B-BCC4-4559-AD59-D62EB6D58A22}). Possible environment corruption.
View 2 RepliesI am getting the following error when I try to establish ftp remote connection using the 'copy web site' feature on visual studio 2005.
unable to open the web 'ftp://209.*.*.*/httpdocs'. The computer is disconnected from the network.
Why can't I connect to the remote site on visual studio 2005? I can do the same thing on Dreamweaver with no problem. I can ping the IP successfully. I can open the ftp URL on a web browser with no problem.
In both VS 2008 and VS 2010 when we open websites using FILE > OPEN WEBSITE we get a prompt asking us if we want to convert the website to .Net 3.5 or .Net 4.0.
I know once you answer it wont ask again for that site, but it gets annoying when we have alot of websites. We cannot convert the sites because the servers they run on are too old.
Is there a way to disable this prompt permanently?
where to find/download visual source safe plug in or visual source safe client for visual studio 2005 IDE?
I do not want to install visual source safe 2005 server.
I am developing a intranet for our company and right now have a problem on loading my report. I developed my report with Visual Studio 2005 and try to load it with Visual Web Developer. I downloaded ReportViewer as well. My database connection is Windows Authentication also. Here is my code in Visual Web Developer:
Imports Microsoft.Reporting.WebForms
Imports System.Net
Imports System.Security.Principal
Partial Public Class ShowReport
Inherits System.Web.UI.Page
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
End Sub
Private Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
Dim strReportURL As Uri
strReportURL = New Uri("http://SERVERNAME/reportserver")...........................
The problem is I have a laptop that I take to University with me to all my lessons and lectures and it has Visual Studio 2008 installed on it and I work on my assignments in Visual Studio just fine. However when I get home I would like to use my desktop PC which has the exact same copy even from the very same disk of Visual Studio 2008 that is installed on my laptop. The problem is no matter what I do I can't open and work with any projects that I have created on my laptop.
Now if I create the project on my desktop PC it will open just fine on my laptop and I can continue to work with the project but the minute I save and take that project over to my desktop I get the self same error message shown below. [URL] I did do a little research and I found what looked like a solution for some people and that was to change the "SQL Server Instance Name" to SQL2008. As shown below it was set to SQLEXPRESS which is the same as what it says on my laptop copy. [URL] But all this did was present me with a new message as shown below. [URL] Uploaded with [URL] I'm completely at a loss as to what the issue is. Both my laptop and desktop run a fully updated copy of Windows 7 64Bit and have the same copy from the same CD of Microsoft Visual Studio 2008.
I want to use a source control in VS2010, I know my best bet is TFS, but at the moment TFS(can't afford ). As i understand TFS is the new VSS_2005(can afford)Can VSS 2005 be use as a source control for VS 2010 solutions/projects?
View 2 RepliesI've a problem with my Visual Studio.On the 13th of August 2010 i installed a Windows update on my vista sp2 pc. For this date my Visual Studio 2008 sp 1 always has closed itself by opening an aspx-page in designer view. There is no error message just closing the window. I restored a backup of my windows from the time before updating it and it helped, i could open aspx pages in the design view till the update has been installed again automatically after rebooting the pc. I can't disable windows updates, cause it's my pc at work and safety is very important.
View 8 Replies