In both VS 2008 and VS 2010 when we open websites using FILE > OPEN WEBSITE we get a prompt asking us if we want to convert the website to .Net 3.5 or .Net 4.0.
I know once you answer it wont ask again for that site, but it gets annoying when we have alot of websites. We cannot convert the sites because the servers they run on are too old.
Is there a way to disable this prompt permanently?
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Repliesinstalling visual studio 2010 pro RC in windows Xp SP3 and getting a message prompt : invalid windows installer package contact vendorlog file says
Error Message:
[02/22/10,17:09:07] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/22/10,17:09:07] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/22/10,17:09:08] VS70pgui: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 RepliesI have built visual basic windows forms application with Visual Studio 2010. I want to be able to create a report with a yes/no parameter that show either a detail list or a summary only.I built such a report with a windows form and reportviewer.I used View Report Data in the report design mde to create a "ShowAll" parameter but I am now unable to provide this parameter at runtime because the reportviewer does not prompt for a parameter. I found no visual basic code to set "ShowAll" parameter from a report form checkbox placed on the report form to the reportviewer.
View 2 RepliesI have upgraded to VS2010 recently. Now VS2010 is not opening i get an messg box displaying. Microsoft Visual Studio has encountered a problem and needs to close. We are sorry for the inconvenience. It automatically gets restarted and displays the same message. I have re-installed VS more than 3 times.
View 1 RepliesI have this following problem in Visual studio 2005, VB and sql server 2005.
when i am trying to read the data from the database getting this error ("I have this following problem in Visual studio 2005, VB dot net application")
[code]....
' we run this application in around 10 braches. Its getting failed only in 1-2 braches. Rest of the Breches code is running well. ( all System configurations are same in all the braches )
I have created webset using the below link, now i need to install using command prompt so that the virtual directory gets stored in c:/inet pub/ wwwroot/ finish where finish is the name of virtual directory. how can i do it. need command line.
View 1 RepliesWhen I open up a web application project, VS attemps to configure IIS to open the project. This is fine, but typically there is already an application in that place. For example, we have apps that run at the root, and various feature branches would map to the same virtual application. Even though VS can *create* the application, it won't modify an existing one.
For example, lets say IIS has:
/MyApp
During my day I mightwant to work on MyApp from:
c:ranchesfeature1MyApp
c:ranchesfeature2MyApp
c:archive
elease102MyApp
c:production
elease204MyApp
If I delete /MyApp, then VS will create it when I open any of these projects, but it will never modify /MyApp to point to my current project. So first thing is: Is there any way to change this behavior?
Second question is, is there no way to open a web application project w/o having a properly backed IIS application setup? I know you can have the projects run off the casini webserver, but all of our applications target IIS and rely on inherited web.config settings. /MyApp is expecting to find config values that exist at /Web.Config and a login page for the entire system at /Login.aspx. Trying to run /MyApp in casini fails immediately because of these dependencies.
But what if I am just doing a code review. I don't care to browse the site, I just want to open the project. Is there no way to tell VS to just open the project and ignore the fact that IIS isn't setup right?
I have a project in VS2008.Net3.5 with a Module1, form1 and form2.
[CODE]
Imports Microsoft.VisualBasic
Module Module1
Public frm1 As form1
Public frm2 As form2
Sub Main()
frm1 = New form1
frm2 = New form2
Application.run(frm1)
End Sub
'A menu sub
Private Sub menuGotoSpecification_Click(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles menuGotoSpecification.Click
frm2.Show()
End Sub
End Module
Public Class form1
Private Overrides Sub Show()
LoadData()
MyBase.Show()
End Sub
End Class
Public Class form2
Private Overrides Sub Show()
LoadData()
MyBase.Show()
End Sub
Private Sub btnDone_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDone.Click
frm1.show()
frm1.refresh()
Me.Hide()
End Sub
End Class[/CODE]
Question:
At the beginning I am opening form1 from sub Main(). Now from the menu I am openning form2. In form2 I am clicking Done button to hide form2 and go back to form1. It works fine in the 1st trial. Keeping form1 open for the 2nd time, I opened form2 from the menu. Now when I Click the Done button 2nd time it just hides up everything. Form1 does not show UP. It just exits the whole application. But in my btnDone event, I have frm1.show().
I have first installed VS2005 and then installed VS2008. After installing, whenever i create a solution in VS2008, i am able to create it properly. if i double-click the solution file, i am able to open the project. Recently i had a problem in my IIS 5.1 and i uninstalled it and the installed it again. After doing that whenever i try to open a VS2008 solution file, i am getting the following error The selected file is a solution file, but was created by a newer version of this application and cannot be opened.". I even tried creating a blank solution using
File->New->Project->Other Project Types-> Visual Studio Solutions-> Blank Solution.
I then added a new project to this solution. I closed the solution and again when i double-click on the newly created solution file i am getting the same error as previous one. I found some solution in the net, tried that and didn't work at all.
I am developing a intranet for our company and right now have a problem on loading my report. I developed my report with Visual Studio 2005 and try to load it with Visual Web Developer. I downloaded ReportViewer as well. My database connection is Windows Authentication also. Here is my code in Visual Web Developer:
Imports Microsoft.Reporting.WebForms
Imports System.Net
Imports System.Security.Principal
Partial Public Class ShowReport
Inherits System.Web.UI.Page
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
End Sub
Private Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
Dim strReportURL As Uri
strReportURL = New Uri("http://SERVERNAME/reportserver")...........................
The problem is I have a laptop that I take to University with me to all my lessons and lectures and it has Visual Studio 2008 installed on it and I work on my assignments in Visual Studio just fine. However when I get home I would like to use my desktop PC which has the exact same copy even from the very same disk of Visual Studio 2008 that is installed on my laptop. The problem is no matter what I do I can't open and work with any projects that I have created on my laptop.
Now if I create the project on my desktop PC it will open just fine on my laptop and I can continue to work with the project but the minute I save and take that project over to my desktop I get the self same error message shown below. [URL] I did do a little research and I found what looked like a solution for some people and that was to change the "SQL Server Instance Name" to SQL2008. As shown below it was set to SQLEXPRESS which is the same as what it says on my laptop copy. [URL] But all this did was present me with a new message as shown below. [URL] Uploaded with [URL] I'm completely at a loss as to what the issue is. Both my laptop and desktop run a fully updated copy of Windows 7 64Bit and have the same copy from the same CD of Microsoft Visual Studio 2008.
Just as the subject says, my VS'05 installation hangs when trying to create a new website. I even installed a fresh version of VS08 along side '05 and '08 is doing the same.
View 9 RepliesI've a problem with my Visual Studio.On the 13th of August 2010 i installed a Windows update on my vista sp2 pc. For this date my Visual Studio 2008 sp 1 always has closed itself by opening an aspx-page in designer view. There is no error message just closing the window. I restored a backup of my windows from the time before updating it and it helped, i could open aspx pages in the design view till the update has been installed again automatically after rebooting the pc. I can't disable windows updates, cause it's my pc at work and safety is very important.
View 8 RepliesVisual Studio (SP1) runs fine until I try and view .aspx source files with the lines
<style type="text/css">
</stlye>
anywhere in them, upon which it freezes (i.e is totally unresponsive) and I have to use the task manager to shut it down.
I have read a lot of questions about Visual Studio 2008 crashing on viewing some source files. However, I still can't fix this problem.
I have systematically deleted and re-included all other code and it comes down to these two lines, which is very confusing. Sometimes it happens as soon as the lines are added, sometimes it doesn't freeze until I build the solution with any of the problem pages open. I can add external style sheets, and it only started recently.
I had Resharper 4.5 installed and have since uninstalled it, and do not have anything else installed.
Also, it happens to other people with the same source code, and re-installing Visual Studio does not fix the problem. So I have several questions:
Is there any way I can find out what's happening? I don't understand how the code (the css tag itself) could crash Visual Studio, and am thinking that this is unlikely and it must be something else within my solution, would this be a safe assumption? Could this have anything to do with installing Office 2010?
How do I turn off the feature where closing tags are automatically inserted when an opening tag is typed? I want all auto text turned off.
View 1 RepliesAfter opening an existing proyect in visual studio 2010, the web form in design view doens't work. All server control puts a gray box with the following message : Error Creating Control - imgTransportistaSession state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
View 4 RepliesI know I've seen this in one of the video tutorials but I have no idea which one and I have reinstalled VS since then. I think it was Chris Pels that showed how to set up VS so that you had IntelliSense for XML files. The reason I ask is because I'm going through the Security tutorials series and working on the web.config file and the editor doesn't highlight the closing or opening tag when you click on one or the other like it does for HTML or C#.
Not sure if I'm explaining this clearly or not. When working with HTML or C# I can click on the opening tag for an element, say a div tag and VS will bold the type of the closing div tag. This makes it easy to be sure that I'm not messing up my tags. Well this doesn't happen with an XML document. I saw in one of the videos where the author configured the settings in VS so that IntelliSense would work in an XML document. I just don't remember the path to those settings or what changes were made.
everytime i debug the application i get the disassembly tab window i tried tools/option & unchecked show disaasembly if not is not avaliable & sourec file to exce;ty open the original file
but still i get after making the chnages i restarted my system but still i get it
how do i disable teh disassembly tab
Is it possible to disable Visual Studio (2010) query renaming feature? For example, when I "SELECT * FROM table_name" VS will rename my query to SELECT id, name, type, inspectedBy, inspectedDate FROM table_name"
View 1 RepliesHow do i disable the creation of .bak files in visual studio 2008 for my asp.net application?
View 2 RepliesI just want to disable "return" word. is it possible??
View 2 RepliesTMVC 2.6.13
VS2010
MVC 1.0
Target .Net 3.5
How can I disable warning message?
My client gave me this web solution, in it various projects, and the problematic project (for me) is the Web Site.
I've copied the code to test web server (2008) and installed VS 2008 so I could step through the code on the server due to some weirdness.
Anyhow, when I open the solution locally on my personal computer, it runs on Cassini [URL] because I'm not on a server OS. However, when I run the app on the web server, when I hit F5, it runs oh [URL].
When I'm running the code on the server, how do I point the web site to use Cassini?
