Visual Studio :: Providing Linenumbers In Aspx Or Codebehind Page?

May 7, 2010

how can I ensure linenumbers in aspx or vb page when opened in visual studio

View 2 Replies


Similar Messages:

Visual Studio :: How To Set In Visual Studio Startup Page Other Than Default.aspx

Nov 29, 2010

Is there any opportunity to change it in Visual Studio - not in IIS?

View 2 Replies

Visual Studio :: Drag Table Into Any Page Inside The Visual Web Developer Aspx Page?

Jan 11, 2010

When i drag my table into any asp page inside the Visual Web Developer aspx page, Nothing happen, Even there is no datasource or gridView it just the blank page i created.

I tried to create new web forms and all same results i got.

View 6 Replies

Visual Studio :: Adding A Server Control On Aspx Page Does Not Add Events In Aspx.designer.vb File?

Oct 5, 2010

I work in VS 2008. Whenver I add a server control(Label) and set it properties in aspx.vb and build the solution, I get the error "Label1 not declared". While analyzing this issue I noticed that the event handler statements for the Label1 where not added in the designer.asp.vb file. These statement would actually be added automatically when I drag and drop a control to my webpage.

I would also like to inform the scenario after which this problem came to me. I was working in VS 2008 , VS 2005 and VS 2003 in the same machine.Could this have caused the issue ?

Now each and everytime when I add a control, I am adding the "With Events" code in the designer page to make my build succesfull which makes me to spend more efforts.

View 2 Replies

Visual Studio :: Snippets In Aspx Page?

Dec 29, 2010

I use DevExpress and have a lot of templates which I use in my Web Application - popup windows with certain styles, menus, rounded panels so on. Of course, I don't want to type the same markup hundred times but also don't want to find this markup in whole application in order to paste it again. I use snippets in code-behind for these purposes. But what about markup?I downloaded it but I see only code-behind refactoring and still can't find how can I use something like snippets in aspx page.

View 7 Replies

Visual Studio :: Only HTML Toolbox When Switching From Master Page To Aspx Page?

Mar 24, 2011

Editing a web site project with master page in VS2010Ultimate with SP1 and Win7Ultimate 64 bit. Former everything was working fine - all toolbox windows were available when editing master page or aspx page. Now with the master page all toolbox relevant tab were enabled and show - when switching to a aspx page only the HTML tab is shown and enabled. When checking all "Show all" all expected tabs are disabled.

Even the <asp:> namespace is a unrecognized namespace in the aspx file.

When compiling or debugging/running everything is ok.

How can I solve this problem? I'm using Win7 Ultimate 64 Bit, VS2010 Ultimate and IExplorer 9 and the latest updates from Microsoft.

View 1 Replies

Visual Studio :: Navigation To New Page Causes Change The Size Of Aspx Page?

Jan 6, 2011

Do you have any idea about the problem causes change the size of my nested aspx pages which are included in master page... When I click on my menu items, it navigates to new aspx pages which is in the content-placeholder .but new pages are getting smaller so my page contents, images, tables, text are moving. And my internet explorer is shutting down.

View 2 Replies

Visual Studio :: Cannot Add The Tab Control Or Page Controls To Webpage (aspx)?

Feb 13, 2011

I am university student and i am not fully familiar with MS visual web developer. wat I need to learn is that i am developing a web application for my project and i am stopped at how to add tab control to my web page. i am using MS visual web developer 2010 express edition. in my toolbox there is no tab control or page control option exist.

View 1 Replies

Visual Studio Auto Formatting Not Working On The Aspx Page?

Oct 14, 2010

I am running Visual Studio 2008. I cannot get the auto format to work on the source code of my aspx page. I have tried it from the edit menu and the ctrl K, D. Nothing works. If I manually fix everything, the next time I open the file the formatting is gone. Here is a sample of what it looks like:

[Code]....

View 2 Replies

Visual Studio :: In Visual Studio 2010 Not Finding Default.aspx Error?

Apr 29, 2010

I am having an issue in VS 2010 trying to get even the default ASP.NET Web Application to run in Debug mode. I get the error:

"Unable to start program 'http://localhost:1443/Default.aspx'.

The system cannot find the file specified."

I am stumped here and cannot find anything out there with this error.

View 4 Replies

Visual Studio :: Why Changes Made To A .aspx Page In The Designer Are Not Saved By 2008

Aug 18, 2010

im developing an asp.net website application but suddenly all changes i make to the page in the visual studio designer are not being saved for some reason. Every thing i do in the code behind file is saved with out any problem, also if i edit the .aspx file but in sourceview, the changes are saved, but if i drag a control from the toolbox onto the page designer and set some properties and then save, nothing will have been saved when i close and re-open the page, all changes are lost.

View 1 Replies

Why Changes Made To A .aspx Page In The Designer Are Not Saved By Visual Studio 2008

Aug 18, 2010

im developing an asp.net website application but suddenly all changes i make to the page in the visual studio designer are not being saved for some reason. Every thing i do in the code behind file is saved with out any problem, also if i edit the .aspx file but in sourceview, the changes are saved, but if i drag a control from the toolbox onto the page designer and set some properties and then save, nothing will have been saved when i close and re-open the page, all changes are lost. Its confusing and i have no idea why.Edit: also this happens on only one aspx file. All the other files edits are saved.[URL]

View 2 Replies

Visual Studio :: Closes Itself By Opening Aspx-Page Designer After Windows Update?

Aug 17, 2010

I've a problem with my Visual Studio.On the 13th of August 2010 i installed a Windows update on my vista sp2 pc. For this date my Visual Studio 2008 sp 1 always has closed itself by opening an aspx-page in designer view. There is no error message just closing the window. I restored a backup of my windows from the time before updating it and it helped, i could open aspx pages in the design view till the update has been installed again automatically after rebooting the pc. I can't disable windows updates, cause it's my pc at work and safety is very important.

View 8 Replies

View .aspx Page In Separate Design And Source Tabs In Visual Studio?

Jan 31, 2010

We have three options to view any .aspx page in a tab

Design
Source
Split

How can we view Design and Source in separate tabs for a any aspx page ?

Or if this is impossible!! can we use split option by Vertically splitting the Design and Source ? if later one is possible, I could stretch the view onto two monitors like here as suggested by Nick Craver.

View 2 Replies

Write In .aspx Page Or .aspx.vb(Codebehind) / Which Is Best

Jun 8, 2010

i want to know, if is better to make an entire page in the aspx file or in the aspx.vb file...

if you have to decide, which one do you choose?

ie in aspx:

HTML Code:

[code]....

View 5 Replies

Write .aspx Page Or .aspx.vb (Codebehind)?

Jun 8, 2010

i want to know, if is better to make an entire page in the aspx file or in the aspx.vb file. If you have to decide, which one do you choose? ie in aspx:

Code:
<asp:Table ID="Table1" runat="server" Width="980">
<asp:TableRow>
<asp:TableCell>
SOME TEXT
</asp:TableCell>
</asp:TableRow>
</asp:Table>
ie in aspx.vb:
Code:
dim tabla as new table
tabla.id = "Table1"
tabla.width = 980
dim fila as new tablerow
dim celda as new tablecell
celda.text = "SOME TEXT"
fila.cells.add(celda)
tabla.rows.add(fila)
form1.controls.add(tabla)

View 9 Replies

Visual Studio :: Accessing Controls Of .aspx File In .aspx.cs Withtout Any Declaration?

Feb 10, 2010

I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System.

Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically

[code]...

How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button?

View 3 Replies

Visual Studio :: .aspx Page When Browsed With Chrome Browser Works Fine But With IE8 It Displays "Internet Explore?

Sep 5, 2010

I have VS 2008 installed and have IE8 browser as well as google chrome browser.However wheneever i try to run a .aspx page in solution explorer of VS with the browse with.. options,the page runs fine with chrome browser but not with IE8.The IE browser shows the error "Ineternet explorer cannot display the page".I have set the IE as the default browser in the browse with ... option of the VS 2008.

View 6 Replies

Visual Studio 2008 - Finding Tools For Visual Studio 2008 Which Can Reformat ASPX Code

Jan 6, 2010

Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?

View 5 Replies

Visual Studio :: HTML View Not Recognising Public Vars In Codebehind?

Feb 7, 2010

I'm using VS 2008 and can't seem to get intellisense to reconise Public variables declared in my codebehind.I start a new ASP.NET Web Application project, named something other than "WebApplication1". In my default.aspx.vb codebehind, I declare, say, "Public MyValue As Integer = 10", at the class level of course.Then, in my default.aspx page, within the body tag, I type "<%= myvalue %>"No mater what I try, it refuses to recognise "myvalue" as a valid variable name, however the code DOES compile and runs perfectly. Everything else seems to work fine.

View 3 Replies

How To Call Codebehind From An Aspx Page

Aug 2, 2010

I need to have something similar to onclick for a <asp:menuitem, is there an easy way to do this?

View 1 Replies

Visual Studio :: When Open An Aspx Page In Design View The Layout Is "scrunched" Up?

Jul 2, 2010

We have two installs of VS 2008. One on a machine that previously had 2005 installed and one on a new [clean] machine with no previous Visual Studio install.The clean machine install went fine, however when we open an aspx page in design view the layout is "scrunched" up. In source view the text matches the text in source view [of a copy of the same aspx page].In design view on the 2005/2008 VS installed machine, the layout is fine.Layout on the page is done in a "Table", with various text boxes, buttons, gridviews.

And just to reiterate, the aspx file in design view [using VS 2008 SP1] on the machine that has VS 2005/2008 installedlooks fine, no problem.The same page loaded in design view on the clean machine with VS 2008 SP1 installed is "scrunched" up.For example the gridview that should be at the top right of the page is in left-center of the page and the gridview that should be at the bottom-center of the page is also at the left-center, directly on top of the gridview that should be at the top right sideof the page.Have compared the config of VS 2008 on both machines and can't find a problem!

View 1 Replies

Mvc Return Data From Codebehind Of Aspx Page?

Jun 3, 2010

there I have a situation where I need to make to call to a normal .aspx page from asp.net mvc web application. How can I make this request and get data back from the page. the data will be returned on on the page_load event of the .aspx page

View 2 Replies

C# - Access Object In Codebehind From Aspx Page?

Sep 24, 2010

C# or VB.NET are welcome.

I have an <%#Eval("FirstName")%> in the aspx page, I want to replace "FirstName" to <%#Eval(employee.FirstName)%> but "employee" object
is instantiated in the codebehind like this:

Public employee As New Employee

How can I call this object in the aspx page? Should I can create an "employee" in the aspx? if so, how to do that.

View 2 Replies

C# - Calling A Codebehind Method From Aspx Page From Gridview?

Nov 23, 2010

How do you call a codebehind/class method from a gridview in an aspx page? Also, I need to pass the value of databound column to that method. Is this possible?

Something like this:

<asp:BoundField DataField="Precision" />
<asp:BoundField DataField="MyNumber" DataFormatString="FormatHelper.Format(MyNumber, Precision)" />

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved