Visual Studio :: Unable To Debug In Asp Page
Mar 23, 2010
I am a new in asp.net world (and in asp). I have a problem in asp.net page.... i wish to debug this page to try the error but I don't I can not debug I have downloaded all proj from "Team Fondation" and then I have took all page in check-out. The server, where I develop is the WEB serve test.
View 5 Replies
Similar Messages:
Jan 7, 2011
I am developping an MVC3 RC2 application and just after hitting F5 on my asp web application, I am getting this error message program '[7780] w3wp.exe: Managed (v4.0.30319)' has exited with code -2 (0xfffffffe).So I am totally unable to debug my application
View 10 Replies
Jan 26, 2010
I'm developing a large application in C# Visual Studio. It's reached the point where it takes about a minute to build the entire thing. In order to speed the debugging process, I want to be able to run the program with a debugger without building the entire thing. This seems like a very basic thing one should be able to do, but I've been unable to figure out how to accomplish it.
I have found the area in Options under "Projects and Solutions/Build and Run" where you can specify what VS should do "On Run, when projects are out of date:". I've tried changing it to both "Prompt to build" and "Never build," but it still always builds my entire project whenever I start debugging.
At the moment, I'm circumventing this by starting the program from its executable and attaching the debugger to it, but this is a bit of a hassle and it feels like I should be able to get VS to understand I don't want it to build when it debugs.
View 7 Replies
Mar 15, 2010
I used to be able to attach to my w3wp process and Debug my web application, but this is not working anymore. I have no idea what changed to break this. I'm using Visual Studio 2008 SP1. And I'm debugging in IIS, not using ASP.NET's own server (i.e. I don't Run my project, I simply attach to a running process (w3wp).
My breakpoints simply have the "breakpoint will currently not be hit. The source code is different from the original version."
What I have tried:
Did a solution Clean.
Did a solution Rebuild.
Made sure that compilation debug=true in my web.config file.
Deleted the bin folder
Restarted Visual Studio
Restarted IIS
Restarted my Computer
Added a simple Response.Write to ensure that the latest DLL is being used. It is.
Made sure that Debug ASP.NET is checked in my project properties. It is.
Made sure that all my projects are compiled in my build configuration. They are.
View 5 Replies
May 18, 2010
I moved my site to a Windows 2008 server, reinstalled VS2005 and now I am unable to debug my application. When I click start debugging, the button is greyed out until the browser launches and then it returns to normal. In other words VS is just launching the app without attaching to it. I have tried running as administrator and played around with the authentication settings to no avail. I am running with Forms authentication.
View 4 Replies
Aug 13, 2010
I am unable to debug a WSS 3.0 web part using VS2008. I tried debug=true in web.config.
View 5 Replies
Jun 1, 2010
I am using VS 2008 for development of a web application and IE 7.
The website as usually has some java script and some server side code files (different layers).
For some reason when I start the application in the debug mode (by hitting F5), the break points in the JS are not hit. I get the usual error as no symbols are loaded. But the break points in the CS files in the layers are hit.
If I use (CTLR + F5) and then attach the IE process to debug, then I am able to hit the break points in the JS file. But in this scenario I cant debug the CS files (I presume this is the expected bahaviour).
EDIT: In the IE (properties dialog), 'disable debugging' are unchecked.
why in the F5 mode I am not able to hit the debug points. The same used to work in the different machine not sure what is wrong in this one.
View 9 Replies
Mar 1, 2011
How I am able to debug an .ascx (ASP control), I have placed couple of break point in my asp control but it does not stop. how you start debugging that goes to controls?
View 1 Replies
May 25, 2010
I just upgraded to Windows 7. On Win XP, I could set breakpoints in an ASP.Net project and those breakpoints would hit from any browser/tab on my machine. Using Windows 7, that doesn't work. The browser that launches when I hit F5 does, but no other instances/tabs
do. If I try to explicitly attach to process to attach to another browser instance, it still doesn't hit.I need to debug this way because an error is occuring only when I enter the application by following an external link.
View 2 Replies
Jan 14, 2011
I am not able to debug a Remote web project (Where the project files are located in another server which is in the same network). I am getting the below error message:
Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder,
Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Excel.Range.get__Default(Object RowIndex, Object ColumnIndex) at InventoryADD.Button1_Click(Object sender, EventArgs e) in
\10.38.23.228q1uatassettrackInventoryADD.aspx.cs:line 670
It works fine when i try to access the website through IIS. Shud i do some setting changes on VS 2005?
I've tried with
<trust
level="Full"
originUrl="" />
View 1 Replies
Dec 21, 2010
Basically what I am trying to do is have my webpage project folder located directly on my local machine (ex. Local #1). Our database is located on a server (ex. Server #1) . I am building my web applications on my local machine and then trying to debug them in Visual Studio 2008. Only every single time I click to debug my project I get a "Security Exception" error that looks something like the following...
"Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
I'm somewhat leaning towards the fact that I need to connect to the database to pull information from it and I don't have the proper permissions is the reason why this is happening but I've also read that it can be something that deals with improper configuration of my Web.Config file (i.e. I do not have something enabled).
Note #1: A co-worker of mine is having the same problem if he tries to put the project locally and then debug it. He has full administrative access to the DB and everything else.
View 6 Replies
Jul 13, 2010
I have tried attaching the debugger to the IIS worker process and have a break point on the asp page. But it never hits the breakpoint.
I am able to debug the aspx pages in the same site using the above process.
View 2 Replies
Jun 9, 2010
I need to debug a page which loads up by redirection from another page. Here's my chain of events:
Page 1 loads, options are set in a form
Page 1 options saved into Session variable
Page 2 loads and reads Session variable
Page 2 processes <-- it is at this point that I need to debug
Page 2 won't actually load without the session variables, so when I hit the Start Debug button in VS2010 I just end up at a blank page.
Is it possible to 'fake' session values before loading page so I can then observe the logic flow, or is there a better way?
View 2 Replies
Jan 3, 2010
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 Replies
Jun 9, 2010
I have an asp.net project in visual studio 2008I press F5 and the "test page" does not launch and I don't understand why.Looked at the properties for the site and "start action" is correctly set to "use current page"Similar question. assuming it automatically launched above, how does one open a 2nd instance of the current debug site (seems like their ought to be a "launch site" button?edit: I went back and launched VS as admin and it did launch the site. Maybe this is a security issue?
View 1 Replies
Apr 13, 2010
I want to debug EditPanel.debug.js file of HTML Editor, but it never shows in VS 08 and Im sure it executes to that line.What I did to enable debuggingUnchecked both 2 checkboxes for disabling the debugging
Set ScriptMode="Debug"
Change following line
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.js")]
to
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.debug.js")]
View 3 Replies
Aug 8, 2010
I downloaded Visual Studio 2008 Professional Edition via torrent.
It was working fine for months & i formatted my comp & when i tried to reinstall it is not getting installed !
It shows the following error !
and the error log file seems to be like this...
BUT.,
I'm able to use Visual Studio & i'm able to work in it....
I'm re-installing since 2 days for more than 4 times...
View 1 Replies
Mar 3, 2010
How can i debug my deployed web service?
I have deployed a web service on my development machine and i am connecting it through my asp.net application, both web service and asp.net application are on same machine but web service is hosted on IIS.
View 1 Replies
Apr 14, 2010
I have 2 sollutions (1 CMS, 1 Customer specific with controls). The customer controls are coppied (with xcopy) to the CMS location. In the web.config of the CMS the specific controls are registered.The controls are useing functions from the CMS dll as well.How can I debug those two solutions as it where only one? I tried to start the CMS in debug mode with breakpoints in de CMS and customer controls, in this case only the breakpoints in the CMS are used. If I run the customer controls in debug mode only the braekpoint in this solution are used.The CMS is running on my local IIS 7.
View 1 Replies
Jun 1, 2010
I am using VS2010 and am working on an ASP.NET web application for .net 4.0.
I have created a file called StringUtilities.js and placed it in a subfolder of my application called Scripts.
The entire content of the file is listed here:
[Code]....
In one of my .aspx pages I have the following code:
[Code]....
On a button's "OnClientClick" (for example) I call the method encodeText() and everything works fine.
Today I added the method updateImage() which calls StringUtilities.js - updateAttribute() method, also added today.
If I open that unit in VS2010 and place a break point in the source code for the new method it turns white and says:
"The breakpoint will not currently be hit. No symbols have been loaded for this document.".
What gets even stranger (this is so hard to exaplain)....
Before today I did not have the method updateAttribute() in that .js file. So even though my source editor is showing all of my new source code changes, if I trace the previous method that did exists - htmlEncode(), the trace lines in the editor are highlighting where the lines "used" to be. which is near the top of that file as if my new code was not there.
It just sounds like there must be a different way of tracing javascript and the way I am doing it must not be it. I would have assumed it worked the same way I would trace my c# code.
View 8 Replies
May 27, 2010
When I ran Vista (x64) Prem with IIS7 and VS2008 sp1, I could press F5 and start debugging a web application and the debugge would run as long as I needed. I got a new PC that has Win 7 (x64). Now, the debugger will run 30-60 seconds and then quits. The web application still runs but the debugger shows that it is not in debug mode and the breakpoints are no longer hit. I know you can attach to the w3wp process and debug that way, but has anyone found a way to keep the debugger running for as long as you need when you press F5??
View 1 Replies
Oct 12, 2010
I have VWD Express and I can't debug lower layer methods in the application the debugger doesn't step into breakpoints that are set in these layers. what do I do? I need to debug lower layer assemblies most of the time.
View 10 Replies
Feb 23, 2011
I have vs 2003 & 2010 on same machine. But my application is in asp.net 1.1 so I have to work on VS 2003. (I dont have to migrate to 4.0).
I have followed this link http://msdn.microsoft.com/en-us/library/aa239576(v=vs.60).aspx but still it is not working.I put a break point on page load of my first login page. when I hit F5, the control comes to visual studio and make that line yellow but stays for few seconds only and then leave the contol and visual studio automatically.I'm not able to debug it. Don't know what the problem is.
View 4 Replies
Feb 25, 2011
I'm not sure if this is the correct forum for this but I was just wondering, I'm very new to Javascript programming and was wondering if their is a way to debug embedded JavaScript from Visual Studio, current and old versions?
View 7 Replies
Aug 13, 2010
The default ASP.NET web server that launches from within Visual Studio (Casini) is a little buggy on my development machine, so I like to publish to a local IIS instance on my dev machine and look at the web application there. However, I'm not automatically in "Debug Mode" when I launch the application this way.
I know that VS 2010 has an "Attach to Process" debug feature, but I'm not sure exactly how to use it. What do I need to do to be able to debug a local IIS ASP.NET web application from within Visual Studio? Specifically:
What settings do I need to change in the configuration of my web application?
What "Package/Publish Settings" do I need to change?
Is there anything I need to change in IIS?
Is there anything special I need to do in the "Attach to Process" screen?
Background Information: I'm running Visual Studio 2010 on Windows XP SP3 with IIS 5.1 and .NET 4.0.
Additional Information:
I should add that I've tried attaching to aspnet_wp.exe, but when I go to a page that I know has a breakpoint in it, I get the following message when I hover over the "open circle" breakpoint:
The breakpoint will not currently be hit. No symbols have been loaded for this document.
View 5 Replies