Unable To Debug On Browser/tab Other Than One Launched By Visual Studio?
May 25, 2010
I just upgraded to Windows 7. On Win XP, I could set breakpoints in an ASP.Net project and those breakpoints would hit from any browser/tab on my machine. Using Windows 7, that doesn't work. The browser that launches when I hit F5 does, but no other instances/tabs
do. If I try to explicitly attach to process to attach to another browser instance, it still doesn't hit.I need to debug this way because an error is occuring only when I enter the application by following an external link.
View 2 Replies
Similar Messages:
Jul 19, 2010
Unable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)
View 2 Replies
Jan 7, 2011
I am developping an MVC3 RC2 application and just after hitting F5 on my asp web application, I am getting this error message program '[7780] w3wp.exe: Managed (v4.0.30319)' has exited with code -2 (0xfffffffe).So I am totally unable to debug my application
View 10 Replies
Mar 23, 2010
I am a new in asp.net world (and in asp). I have a problem in asp.net page.... i wish to debug this page to try the error but I don't I can not debug I have downloaded all proj from "Team Fondation" and then I have took all page in check-out. The server, where I develop is the WEB serve test.
View 5 Replies
Jan 26, 2010
I'm developing a large application in C# Visual Studio. It's reached the point where it takes about a minute to build the entire thing. In order to speed the debugging process, I want to be able to run the program with a debugger without building the entire thing. This seems like a very basic thing one should be able to do, but I've been unable to figure out how to accomplish it.
I have found the area in Options under "Projects and Solutions/Build and Run" where you can specify what VS should do "On Run, when projects are out of date:". I've tried changing it to both "Prompt to build" and "Never build," but it still always builds my entire project whenever I start debugging.
At the moment, I'm circumventing this by starting the program from its executable and attaching the debugger to it, but this is a bit of a hassle and it feels like I should be able to get VS to understand I don't want it to build when it debugs.
View 7 Replies
Mar 15, 2010
I used to be able to attach to my w3wp process and Debug my web application, but this is not working anymore. I have no idea what changed to break this. I'm using Visual Studio 2008 SP1. And I'm debugging in IIS, not using ASP.NET's own server (i.e. I don't Run my project, I simply attach to a running process (w3wp).
My breakpoints simply have the "breakpoint will currently not be hit. The source code is different from the original version."
What I have tried:
Did a solution Clean.
Did a solution Rebuild.
Made sure that compilation debug=true in my web.config file.
Deleted the bin folder
Restarted Visual Studio
Restarted IIS
Restarted my Computer
Added a simple Response.Write to ensure that the latest DLL is being used. It is.
Made sure that Debug ASP.NET is checked in my project properties. It is.
Made sure that all my projects are compiled in my build configuration. They are.
View 5 Replies
May 18, 2010
I moved my site to a Windows 2008 server, reinstalled VS2005 and now I am unable to debug my application. When I click start debugging, the button is greyed out until the browser launches and then it returns to normal. In other words VS is just launching the app without attaching to it. I have tried running as administrator and played around with the authentication settings to no avail. I am running with Forms authentication.
View 4 Replies
Aug 13, 2010
I am unable to debug a WSS 3.0 web part using VS2008. I tried debug=true in web.config.
View 5 Replies
Jun 1, 2010
I am using VS 2008 for development of a web application and IE 7.
The website as usually has some java script and some server side code files (different layers).
For some reason when I start the application in the debug mode (by hitting F5), the break points in the JS are not hit. I get the usual error as no symbols are loaded. But the break points in the CS files in the layers are hit.
If I use (CTLR + F5) and then attach the IE process to debug, then I am able to hit the break points in the JS file. But in this scenario I cant debug the CS files (I presume this is the expected bahaviour).
EDIT: In the IE (properties dialog), 'disable debugging' are unchecked.
why in the F5 mode I am not able to hit the debug points. The same used to work in the different machine not sure what is wrong in this one.
View 9 Replies
Mar 1, 2011
How I am able to debug an .ascx (ASP control), I have placed couple of break point in my asp control but it does not stop. how you start debugging that goes to controls?
View 1 Replies
Nov 29, 2010
F5 builds the web project and the opens the web site but the project is not in debug.
This has happened over the last week but I was not aware of making any relavent configuration changes or updates.
View 2 Replies
Jan 14, 2011
I am not able to debug a Remote web project (Where the project files are located in another server which is in the same network). I am getting the below error message:
Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder,
Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Excel.Range.get__Default(Object RowIndex, Object ColumnIndex) at InventoryADD.Button1_Click(Object sender, EventArgs e) in
\10.38.23.228q1uatassettrackInventoryADD.aspx.cs:line 670
It works fine when i try to access the website through IIS. Shud i do some setting changes on VS 2005?
I've tried with
<trust
level="Full"
originUrl="" />
View 1 Replies
Dec 21, 2010
Basically what I am trying to do is have my webpage project folder located directly on my local machine (ex. Local #1). Our database is located on a server (ex. Server #1) . I am building my web applications on my local machine and then trying to debug them in Visual Studio 2008. Only every single time I click to debug my project I get a "Security Exception" error that looks something like the following...
"Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
I'm somewhat leaning towards the fact that I need to connect to the database to pull information from it and I don't have the proper permissions is the reason why this is happening but I've also read that it can be something that deals with improper configuration of my Web.Config file (i.e. I do not have something enabled).
Note #1: A co-worker of mine is having the same problem if he tries to put the project locally and then debug it. He has full administrative access to the DB and everything else.
View 6 Replies
Jul 14, 2010
I have a solution with about 10 web services and one web site that calls them. All the services have to launch when I click "start debugging", which is necessary and good. When I stop debugging the services are still running. I can right click on each of them in the system tray to shut them down, or I can shut down Visual Studio and they get shut down automatically. Is there a better way?
I found this SO post which says how to not start the services in the first place, but I want the services to launch (and even want them to stay running more often than not.)
View 1 Replies
Aug 3, 2010
When I press F5 (debug) in Visual Studio 2010 Express, I get the following error message:
Unable to start debugging on the web server. IIS does not list a web site that matches the launched URL.
This happens only when I am trying to make use of the option "Use custom server".
I got both the host file and the IIS bindings set up. The server that I specified is working in the browser.
View 3 Replies
Aug 17, 2010
While I am running a webpage by doing a right click on it and selecting 'View in Browser' in Visual Studio 2008; it popping up the following error:-
ERROR
The requested URL could not be retrieved While trying to retrieve the URL: /TestADO2/Default.aspx
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect. Possible problems:
Missing or incorrect access protocol (should be `http://'' or similar) Missing hostname Illegal double-escape in the URL-Path Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster.
Generated Tue, 17 Aug 2010 06:23:46 GMT by linux.site (squid/2.5.STABLE5)
Preconditions:-
1. My system is connected to a LAN which is accessing the internet through a webserver.
2. When we first time open a web browser it asks us to login to access the internet.
View 1 Replies
Jan 7, 2010
I just finished upgrading my vista to 7 and with some problems and one of them is every time I open my file and tried to debug it or run in browser, I always get a warning saying = Unable to connect to the ASP.NET Development Server I thought some problems when I upgrade so I reinstall the software but no luck
View 3 Replies
Jan 3, 2010
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 Replies
Apr 13, 2010
I want to debug EditPanel.debug.js file of HTML Editor, but it never shows in VS 08 and Im sure it executes to that line.What I did to enable debuggingUnchecked both 2 checkboxes for disabling the debugging
Set ScriptMode="Debug"
Change following line
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.js")]
to
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.debug.js")]
View 3 Replies
Feb 14, 2011
Every time I press F1 to view the online Help it launches in the Opera browser. I really dislike Opera and only have it installed on my PC for testing purposes. How do I change it to IE?
View 1 Replies
May 28, 2010
I have come across some ASP.NET sites that rather than displaying a page, it launches a console-based application similar to how LiveMeeting kicks-off. I am interested in building an app that uses that feature so that I could take advantage of richer features of a console-based app, but for the life of me, I can't seem to find any info on the internet as to what type of project this would be in VS. I have tried WPF Browse Application, but thats not what I am looking for since the app type I am talking about does not run in the browser at all. The image below shows what happens when reaching the web site, which would therefore then launch the console-application (which is not even installed on the client's machine)
View 1 Replies
Aug 8, 2010
I downloaded Visual Studio 2008 Professional Edition via torrent.
It was working fine for months & i formatted my comp & when i tried to reinstall it is not getting installed !
It shows the following error !
and the error log file seems to be like this...
BUT.,
I'm able to use Visual Studio & i'm able to work in it....
I'm re-installing since 2 days for more than 4 times...
View 1 Replies
Mar 3, 2010
How can i debug my deployed web service?
I have deployed a web service on my development machine and i am connecting it through my asp.net application, both web service and asp.net application are on same machine but web service is hosted on IIS.
View 1 Replies
Apr 14, 2010
I have 2 sollutions (1 CMS, 1 Customer specific with controls). The customer controls are coppied (with xcopy) to the CMS location. In the web.config of the CMS the specific controls are registered.The controls are useing functions from the CMS dll as well.How can I debug those two solutions as it where only one? I tried to start the CMS in debug mode with breakpoints in de CMS and customer controls, in this case only the breakpoints in the CMS are used. If I run the customer controls in debug mode only the braekpoint in this solution are used.The CMS is running on my local IIS 7.
View 1 Replies
Jun 1, 2010
I am using VS2010 and am working on an ASP.NET web application for .net 4.0.
I have created a file called StringUtilities.js and placed it in a subfolder of my application called Scripts.
The entire content of the file is listed here:
[Code]....
In one of my .aspx pages I have the following code:
[Code]....
On a button's "OnClientClick" (for example) I call the method encodeText() and everything works fine.
Today I added the method updateImage() which calls StringUtilities.js - updateAttribute() method, also added today.
If I open that unit in VS2010 and place a break point in the source code for the new method it turns white and says:
"The breakpoint will not currently be hit. No symbols have been loaded for this document.".
What gets even stranger (this is so hard to exaplain)....
Before today I did not have the method updateAttribute() in that .js file. So even though my source editor is showing all of my new source code changes, if I trace the previous method that did exists - htmlEncode(), the trace lines in the editor are highlighting where the lines "used" to be. which is near the top of that file as if my new code was not there.
It just sounds like there must be a different way of tracing javascript and the way I am doing it must not be it. I would have assumed it worked the same way I would trace my c# code.
View 8 Replies