Visual Studio :: Web Test Option Missing - Need To Reinstall?
Sep 15, 2010
I initially installed Visual Studio 2008 Developer edition. I then installed Visual Studio 2008 Suite edition, with 2008 Developer edition still on the PC. When attempting to create a new Web Test, this option is not available to select when adding a new test in the solution.
The steps I followed:
1) Create new Project: Test Project
2) Add "New Test"
3) At this point I would expect "Web Test" to be an option, I only have Ordered Test, Unit Test, and Unit Test Wizard.
Do I need to uninstall Visual Studio 2008 and start with a clean Visual Studio 2008 Suite to get the "Web Test" option to show?
I removed mvc3 tools for visual studio, and now it seems no matter how much reinstalling, or un-installing i do i cant get razor project templates or intellisence for razor.I have even removed the visual studio folder and visual studio hives in the registry but still the same. I seem to remember a simular problem with mvc2 tools, that the installer doers not reconize it as un-installed and therefore does not re-install it.how can i re-install mvc tools so VS reconises razor, or remove all trace of visual studio and mvc3 so that i can start again?
I recently "inadvertantly" installed VWD 2010. I still have my Visual Studio 2008 (full version) installed and want to remove VWD 2010. I want to recompile my active projects under VS 2008. Here are the steps I am planning to undertake. Am I missing anything?
1. Save all active projects 2. Remove VWD 2010 using "Uninstall Programs" from the control panel.3. remove ASP 4.0 via the same route.4. Reinstall VS 2008 5. Reinstall all service packs.Will this bring me back to a fully functional VS 2008? Need I make any additional registry changes?For the record, I do like VWD 2010 and would like to upgrade to the professional version but I cannot afford to do so at this time. I need to build some console applications and this is not possible under VWD. I am also unable to install C# Express.
I lately installed vwd express, and including this installation I installed (automatically) also the sql express 2008.I had a problem with my vwd, and I got an advice of removing it and install again. I removed it, and removed also the sql express. Now I understand that I probably shouldn't have done it, but I did.I also removed manually some folders that relate to the sql server (after I unistalled the sqlserver thru "add remove programs").I reinstalled the vs 2008 express, but this time it didn't install again the sql express.I entered to this page: [URL] and tried to install it by myself. It opened the installation
and after a few seconds it said that the sql was installed. Maybe it still recognizes something that was left...I entered the registry and deleted the relate files to sqlserver. I tried to install again, but still the same phenomena.I need an advice what to do. I have no problem with uninstall the vs 2008 express, and install it all over again, but I knowthat again - the sql won't be installed.I hope I gave here all the required details.
I have installed SQL Server 2008 express, reinstall it with advanced services, uninstall TFS 2010 and tries to reinstall it but fails. It doesn't want to completely uninstall.
So I'd like to clean everything by hand (deleting registries, folders) but can't find any info. I have deleted install directory but installer still memorized that TFS is installed.
I installed a VS2010 Trial and have since downloaded a copy from the company MSDN account. I uninstalled everything that said VS2010 in the Programs area and am now attempting to reinstall the MSDN copy. It does not work. The install ends up through all kinds of errors and ends with an unsuccessful install message.
What do I have to do to completely clean off the old versio, or may the new one overwrite everything?
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
i have to do some message exchange with a 3rd party (in a website).When the client posts a page, i start the message exchange. When that doesn't succeed for some reason, i report this to the client by rendering the page with a message.On the background, in a separate thread, i start a process to send abort messages to the 3rd party. I can't do this while the user is waiting for the page to come back, because it might take a few minutes.But in a test project, the test ends when the message to the 3rd party is sent, and after the new thread is started. But it seems that the new thread also ends, when the test is done.
Is that normal behaviour?I do start the thread in a new class with a reference to 2 objects from the class which tries to send the message in the first place, may that be a problem?EDIT: it keeps running when the whole process is started in IIS
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work). In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
when i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
I have VS 2008 Professional Edition.....I want to test a function like this:
public int getIdByName(string name) { var item=from x in DATAB where x.name=name select x.id; . . return idValue; }
now I test end I have:
[TestMethod()] public getIdByNameTest() { string name="Bob" int expected = 1; int actual; actual = ClassGET.getIdByName(name); Assert.AreEqual(expected, actual); Assert.Inconclusive("Verify the correctness of this test method."); }
The error in "test run" is:
Failed ......[Class]....... Test method threw exception: System.ArgumentException: The specified named connection is either not found in the configuration that is not for use with the EntityClient provider or thought is invalid
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
I would like to know how to run a MbUnit test in Visual Studio 2008 Professional. In the binDebug folder of my test project I have placed MbUnit.dll & Gallio.ddl.I have also installed ReSharper 5 plugin in Visual Studio I have made a MvcApplication1.Tests test project which is a Class Library.My test is just testing the Index() action of the HomeController in a default VS 2008 MVC project, it looks like this:
[Code]....
My question is very simple: HOW DO I RUN THIS TEST?
I am doing Automated coded ui testing in asp.net 2010 for web application. I am testing site and i need to know how can i create the test which will work with all browsers. Right now i created test in IE 8 but its not working in Firefox. So is there any way i can create one test and will work in all browser.
I'm trying to create a MVC project inside of VS 2010 using Asp.Net MVC 2 RC2, using all the default settings and the default "Visual Studio Unit Test" framework and am getting 6 Namespace errors upon compile (without touching ANYTHING). Pretty standard setup. I removed the prior MVC versions before installing RC2 for VS2010 etc. These are the errors:
[Code]....
The namespace "AWWOAMVC" is empty (or so says Intellisense). Both of these reside in the same solution explorer, as it is brand new project.
use visual web developer 2008 express eddition IDE but this IDE have new web site and new file only from the file menu and dont have new project option what is the problem of my IDE and what is deffrent between new web site and new project choice
When I click on New Project-> Visual Basic (or C#)-> Web, the only options i get is AjaxControlExtender, AjaxServerControl and ASP.Net Server Control. How do i get the ASP.Net WebApplication option to show up?
my visual studio 2010 has the following problem, can't see the missing characters. Everything is fine, if I do a copy to notepad, it will show up. The intellisense is fine. (I manually removed the characters after copying here). My beta2 started to have the problem a month ago. Now I installed RC, same problem. My windows is XP SP3.
using ystem; using ystem. ollections. eneric; using ystem. inq; using ystem. eb; using ystem. eb. vc;
namespace vcApplication3. ontrollers { public class ccount ontroller : ontroller { // // : /Account/ public Action esult ndex() { return iew(); } } }
I am using the ASP Web Application template from Visual Studio for my website. I created an images folder in the directory directly, and not in visual studio. I cannot get visual studio to show this directory. How do you add directories in visual studio or get it to recognize it. I know most of you are thinking of responding with "Why don't you just create the image directory through visual studio".
I'm trying to learn ASP.NET MVC, but have discovered that I don't even have the ASP.NET MVC 2 Web Application template installed. I'm using VS 2010 Ultimate (10.0.30319.1 RTMRel). How do I get this installed so I can begin?
I have a couple files that are missing after a I publish a web application project in VS 2008. I know that the files need to be included in the solution and they are. I have tried excluding them and including them to hopefully reset whatever is missing these files in the first plac but that had no effect.
Ultimately, I need this to work on the command line with msbuild.exe, but I get the same results when I publish through VS.
Knowing that the files are already included in the project, what else do I need to do to get these to files to be copied over in the publish/build?
