Visual Studio :: Attempting To Debug Remote Outside Network?
Feb 1, 2011
I am attemting to remote debug my application in a outside server I have the IP and the the user. I am using in my server msvsmom.exe 64bit version 10.3.30319.1. In my computer I have visual studio 2010. I had opened all the port required in the MSDN docimentation in the server and host. I copied my web application in the server.
When I am trying to connect from my VS2010 in "Attach to Process" using in qualifiers this format with the real information : Administrator@xxx.xxx.xxx.xxx
I have this error: "Unable to connect to the Microsoft Visual Studio Remote Debugging Monitor named Administrator@xxx.xxx.xxx.xxx" The visual Studio Remote Debugger does not support this edition of windows"
View 2 Replies
Similar Messages:
Jul 10, 2010
Debugging running remote web application
View 1 Replies
Jan 14, 2011
I am not able to debug a Remote web project (Where the project files are located in another server which is in the same network). I am getting the below error message:
Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder,
Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Excel.Range.get__Default(Object RowIndex, Object ColumnIndex) at InventoryADD.Button1_Click(Object sender, EventArgs e) in
\10.38.23.228q1uatassettrackInventoryADD.aspx.cs:line 670
It works fine when i try to access the website through IIS. Shud i do some setting changes on VS 2005?
I've tried with
<trust
level="Full"
originUrl="" />
View 1 Replies
Apr 3, 2010
First time i am going to work on (maintenance project) application that is already in production.The application was developed in ASP.net 3.5/C# 3.0(web forms) with jQuery,Ajax,Sql server 2005 and microsoft enterprise library 4.0.,WCF services. Questions (bear with me if my question is wrong)
1) Is it possible to use Visual Studio (2008 with SP1) to debug the remote application (i.e already in production)?.What are the tools do i need to use in order to keep track the things in case something went wrong?
2) Simply looking into Log file ,will solve the issues?
3) After having done with enhancements,is it possible to directly deploy the DLLs into production server.Won't it affect the running application?
what are the procedures i need to follow.Client is ready to provide any tools for my support.(What are the area do i need to aware to handle production system
View 2 Replies
Jan 22, 2010
i m using VSS 2005 and VS 2005. on one machine i installed VSS 2005 and create project. on second machine i opended my project using project source safe, it ask me for user detail and i enter details. i got the complete project. problem is that when i try to run project i got following error. "An editor or project is attempting to check out a file that is modified in memory, which will result in saving it. Saving files during the build process is dangerous and can result in incorrect build outputs in future. Do you want to continue with the check out?"
View 1 Replies
Jan 3, 2010
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 Replies
Jan 21, 2011
So, i am running SQL Server 2008 R2 Express and VWD 2010 Express on Windows 7. I am logged in as admin on my machine. I have created a new web app project (VB Linq to SQL) and I have attempted to add an existing .mdf to my project's App_Data folder. I right-click, choose "add existing...", navigate to the .mdf file in the C:Program FilesMicrosoft SQL ServerMSSQL10.SQLEXPRESSMSSQLDATA folder, and then i get an "Access is denied" error box with no further details.
View 2 Replies
Feb 3, 2010
I have a NEW company issued Dell laptop just installed VS 2008 Pro. When I am at work logged into the network all is well. When I go home and try to work is when I have issues (on or off of VPN does not mater; I get the same issue.). I open VS 2008 and try to open any aspx file in the IDE it freezse and will stay that way. I can open the ebCongif file if I try it first. Just cannot open aspx files....I have to open the task manager to kill the process. If any one has had this issue ...Also because we only have dot net framework 2.0 on our servers I am working with 2.0 in VS 2008.
View 6 Replies
Mar 3, 2010
How can i debug my deployed web service?
I have deployed a web service on my development machine and i am connecting it through my asp.net application, both web service and asp.net application are on same machine but web service is hosted on IIS.
View 1 Replies
Apr 14, 2010
I have 2 sollutions (1 CMS, 1 Customer specific with controls). The customer controls are coppied (with xcopy) to the CMS location. In the web.config of the CMS the specific controls are registered.The controls are useing functions from the CMS dll as well.How can I debug those two solutions as it where only one? I tried to start the CMS in debug mode with breakpoints in de CMS and customer controls, in this case only the breakpoints in the CMS are used. If I run the customer controls in debug mode only the braekpoint in this solution are used.The CMS is running on my local IIS 7.
View 1 Replies
Jun 1, 2010
I am using VS2010 and am working on an ASP.NET web application for .net 4.0.
I have created a file called StringUtilities.js and placed it in a subfolder of my application called Scripts.
The entire content of the file is listed here:
[Code]....
In one of my .aspx pages I have the following code:
[Code]....
On a button's "OnClientClick" (for example) I call the method encodeText() and everything works fine.
Today I added the method updateImage() which calls StringUtilities.js - updateAttribute() method, also added today.
If I open that unit in VS2010 and place a break point in the source code for the new method it turns white and says:
"The breakpoint will not currently be hit. No symbols have been loaded for this document.".
What gets even stranger (this is so hard to exaplain)....
Before today I did not have the method updateAttribute() in that .js file. So even though my source editor is showing all of my new source code changes, if I trace the previous method that did exists - htmlEncode(), the trace lines in the editor are highlighting where the lines "used" to be. which is near the top of that file as if my new code was not there.
It just sounds like there must be a different way of tracing javascript and the way I am doing it must not be it. I would have assumed it worked the same way I would trace my c# code.
View 8 Replies
May 27, 2010
When I ran Vista (x64) Prem with IIS7 and VS2008 sp1, I could press F5 and start debugging a web application and the debugge would run as long as I needed. I got a new PC that has Win 7 (x64). Now, the debugger will run 30-60 seconds and then quits. The web application still runs but the debugger shows that it is not in debug mode and the breakpoints are no longer hit. I know you can attach to the w3wp process and debug that way, but has anyone found a way to keep the debugger running for as long as you need when you press F5??
View 1 Replies
Oct 12, 2010
I have VWD Express and I can't debug lower layer methods in the application the debugger doesn't step into breakpoints that are set in these layers. what do I do? I need to debug lower layer assemblies most of the time.
View 10 Replies
Feb 23, 2011
I have vs 2003 & 2010 on same machine. But my application is in asp.net 1.1 so I have to work on VS 2003. (I dont have to migrate to 4.0).
I have followed this link http://msdn.microsoft.com/en-us/library/aa239576(v=vs.60).aspx but still it is not working.I put a break point on page load of my first login page. when I hit F5, the control comes to visual studio and make that line yellow but stays for few seconds only and then leave the contol and visual studio automatically.I'm not able to debug it. Don't know what the problem is.
View 4 Replies
Feb 25, 2011
I'm not sure if this is the correct forum for this but I was just wondering, I'm very new to Javascript programming and was wondering if their is a way to debug embedded JavaScript from Visual Studio, current and old versions?
View 7 Replies
Jan 7, 2011
I am developping an MVC3 RC2 application and just after hitting F5 on my asp web application, I am getting this error message program '[7780] w3wp.exe: Managed (v4.0.30319)' has exited with code -2 (0xfffffffe).So I am totally unable to debug my application
View 10 Replies
Aug 13, 2010
The default ASP.NET web server that launches from within Visual Studio (Casini) is a little buggy on my development machine, so I like to publish to a local IIS instance on my dev machine and look at the web application there. However, I'm not automatically in "Debug Mode" when I launch the application this way.
I know that VS 2010 has an "Attach to Process" debug feature, but I'm not sure exactly how to use it. What do I need to do to be able to debug a local IIS ASP.NET web application from within Visual Studio? Specifically:
What settings do I need to change in the configuration of my web application?
What "Package/Publish Settings" do I need to change?
Is there anything I need to change in IIS?
Is there anything special I need to do in the "Attach to Process" screen?
Background Information: I'm running Visual Studio 2010 on Windows XP SP3 with IIS 5.1 and .NET 4.0.
Additional Information:
I should add that I've tried attaching to aspnet_wp.exe, but when I go to a page that I know has a breakpoint in it, I get the following message when I hover over the "open circle" breakpoint:
The breakpoint will not currently be hit. No symbols have been loaded for this document.
View 5 Replies
Jul 12, 2010
I had everything up and running fine, was able to debug and everything.
I could attach to process and run a SP in the database and it would fire over to VS stopping on the breakpoint.
I can't remember what I did to mess it up but I ended up uninstalling my DB and reinstalling it; SQL Server 2005.
Now when I try to attach nothing happens. The SP runs and that is it I never go back into VS.
I'm thinking I have to reinsatll VS now.
View 2 Replies
Feb 6, 2011
I have solution with several projects, while debugging it gives me this message.
I tired to change it's properties to enable debug but didn't work.
View 1 Replies
Apr 15, 2010
In my Visual Studio 2005, I am getting Hexadecimal numbers when I do a quick watch at all the integers in debug mode.
I am using VB.NET. What settings need to be changed in order to view integer values in decimal number system?
View 1 Replies
Mar 14, 2011
I have a solution with some projects. There are several break-points in different projects. I want to trace the first thread hit one of these break-points and continue tracing that single thread despite of other threads entering the same code-blocks.
I know this is possible through defining a condition on the break-point i.e, thread name = ... or thread Id = ... but my case is a heavy loaded asp.net application and as soon as I attach to w3wp.exe many threads will hit the break-points. I need some thing like a ThreadLocal<break-point>.
View 2 Replies
Apr 19, 2010
Im using Visual Studio 2010 in Windows 7.
I got a problem regarding CSS in my pages. I managed to apply styles to my page using css and everything looks fine in the Design view. I ran it on IE8 and everything is working fine. Now after I returned to Visual Studio, added some rules to my CSS, and noticing that everything is working fine in the Design view, I ran it again in IE8 and nothing has changed. The rules I added was ignored and it looks the same. I ran it on Firefox and Google Chrome and it's working fine.
But if I ran my project in IE8 through IIS7.5, everything is working fine so it means, the problem is within visual studio 2010.
View 1 Replies
Jul 13, 2010
I have tried attaching the debugger to the IIS worker process and have a break point on the asp page. But it never hits the breakpoint.
I am able to debug the aspx pages in the same site using the above process.
View 2 Replies
Apr 22, 2010
I was trying to debug the applicatioons but after certain amount of minutes (say 3 minutes), the step into (F11) will act as F5.
View 6 Replies
Sep 16, 2010
I want to know, is this possible to Debug Asp.net pages with Stroed procuder. Means may we can debug Stored procuder in .net framwork with application.
View 4 Replies
