Anyone have this problem. When you write a ex. label name or label text in the properties window, it look like its updating the text before you actually are finish. This make you type over what you allready wrote. Its not a big problem,
View 2 RepliesHow can I convert text that I type manually into the VS ASP.NET Designer into a Label control?
View 1 RepliesI'm using VWD 2010 Express and have found that when I change a property like AutoPostBack from within the property window the corresponding tag (<asp:TextBox...>) was not updated with the property change to the tag.
Is there a setting that I can change in the VWD properties that will enable changes through the property window for a control to automatically update the HTML tag for that control?
I want to display the text entered in a textbox on a label character by character. I.e, if I enter a character in textbox, I need to display that character in the label. Up to the length of the textbox, this procedure has to done for the label also.
View 3 RepliesI have Template fields configured for Gridview. The gridview is using an objectdatabsource to bind itself. I have the gridview configured to use Templatefields which then contain tables to display the information. This works fine.
My question is, is it possible to change the text of the label if certain criteria is reached. If "NumberOfDwellings" is 1 then change the label to read, "1 Dwelling". Where-as if NumberOfDwellings has more than one then it's "3 Dwellings".
<asp:Label ID="lbl_NumberOfDwellings" runat="server" Text='<%# Eval("NumberOfDwellings") & " Dwelling(s)" %> '></asp:Label>
I have been messing about with this for hours surely this should be an easy task ....... I have a stored procedured that creates a invoice on a Quotetable one of the parameters is a output parameter Invoice Number this is passed to a label. (Label1) This works great.
I then need to add items to the invoice on a item table so my next stored procedure should take the value of Label1 and update the foreign key quotenumber on the itemtable with the value from label1.
On the aspx page I have a small section for a gridview which shows the current quote with however many items on it using the control
[Code]....
On the ASP page the control for @Quotenumber = Label1 but I get the following error
'Conversion failed when converting the nvarchar value 'Label' to data type int.'
Is it possible to display or hide a label based on the text rendered in it?
I have a label that will display the value of a control on the previous page. If the value rendered is "0" then I want to hide the label or hide the label and one more label associated with it. (or if the value is more than "0" make it visible.
My problem is when a label's text property has a value without space and bigger than it's width property. -Mostly when i enter a link url- The text of label exceeds the width of label!
View 9 RepliesI'm trying to change a Label's text property and colour properties depending if an event occurs on the page behind file.
Does anyone have a similar issue?
if (((Label)FindControl("Label1")).Text != null) - //getting Object reference not set to an instance of an object.
{
Label Labelmerchantid = (Label)FindControl("Label1");
Labelmerchantid.Visible = true;
Labelmerchantid.ForeColor = System.Drawing.Color.Red;
}
I have an asp page with a textboxes, labels and other controls. I cannot get the .text to change in any of these controls. I click on button which I execute code that I expect to update the text but it doesn't work. Something like Textbox1.text = "Hello" Are there page level properties/settings I should look at? I am perplexed an looking for a place to start. I will provide more information as needed. I just don't know where to start.
View 3 RepliesI am unable to get it done as i have huge data in my table which is spoiling the standard look and feel of grid view..
if (row.RowType == DataControlRowType.DataRow) {
ViewState["description"] = e.Row.Cells[10].Text;
if (e.Row.Cells[10].Text.Length >= 25){
e.Row.Cells[10].Text = e.Row.Cells[10].Text.Substring(0, 30) + "...";
e.Row.Cells[10].ToolTip = ViewState["description"].ToString();} }
I have a form where users enter information in a multi-line text box. This could be anything, such as bullets, carriage return line feeds, etc. Think of anything that you might copy and paste into a multi-line text box from Word Pad, or Word. I then store this information into a SQL Server NText field.When I retreive this information, I need to display it as the user entered it into the text box field into a Literal or Label control (or something else if there is a better alternative) to display it. Problem is that when I display this text into the Text
property of a Literal control everything is jumbled and all characters (bullets) are lost, no carriage returns, etc. One big mush of stuff. If I display this information in the Text property of Label control, I get the bullet characters, but no carriage returns
How to make Label Text Underlined with dots not Text
View 2 Replies I just installed Visual studio 2010 ultimate RC on my windows 7 server. It doe snot show line number. So I went to Tool->Option->Editor, however, there is no where I cna find line number choice.
I used to have Visual Studio 2010 professional beta, it has the same problem, no line number to show up. However, it has a check box: line number. Even if I check the box, still no line number to show up.
if i have a label with text initially and i would like to update the label's text with a textbox.text.. how should i do that?
View 2 RepliesI would like to get the text out of a label. But the label text is set with Javascript.On the page I can see that there is text in the label, but when I debug it shows this: "".
So how do I get the text out of a label that is set with Javascript, at least that is what I think is the problem.
My code:
<asp:TextBox ID="txtCount" runat="server" Width="50px" Font-Names="Georgia, Arial, sans-Serif" ForeColor="#444444"></asp:TextBox>
<ajaxToolkit:NumericUpDownExtender ID="NumericUpDownExtender1" runat="server" Minimum="1"[code]......
I am fairly new to Visual Web Developer and am trying something out. I have an ASPX page done with a button (using VB). I have already been able to get the username variable to write to the page using Response.write(Environment.UserName). I want to go a little farther with this and extract the field [Program] from a table tblUserInfo in the sql database where the Env.UserName = tblUserInfo.username.
Now I have started to code the button but can't figure out how to use an SQL statement to extract that data...
[Code]....
My end result will be once I can see what program a user is linked to in the table, the question form they are going to will be different based on that program value... but one step at a time eh.
how can i make text in my label arranged to make each line end with the same point
I mean to be like in this form
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
not in this form
---------------------------
--------------------
-------------------
--------------
---------------------------
----------------------
---------------------------
------------------
it always appear in this form :
<asp:TextBox ID="TextBox1" runat="server" Text='<%# DateTime.Now.ToLongDateString() %>'></asp:TextBox>
ı need textbox text set DateTime.Now.ToLongDateString() how to make ? must inline
Can any one advise how to formate lable text in to kgs (1,122,222.000)
View 7 RepliesI am using an Ajax ReorderList in my content page and I would like to get the value of text box or a label in code behind(C#).
However I always receive a null value,
I have the following snippet to offer a filter on a Leads screen:-
Code:
@using (Html.BeginForm())
{
<p> Surname: @Html.TextBox("SurnameSearch")
Forename: @Html.TextBox("ForenameSearch")
Address: @Html.TextBox("AddressSearch")
Postcode: @Html.TextBox("PostcodeSearch")
[Code] ....
The problem is that, depending on the width of the screen, the labels (e.g. "Postcode") do not always appear on the same line as the text box/dropdown they refer to. Is there a way of ensuring that, when it needs to "flow" an element down to the next line, it flows the label and the input control together?
Why doesnt this work:
Code:
<asp:Label ID="lblName" runat="server" Text='<%# Eval("Title")%> <%# Eval("Forename")%> <%# Eval("Surname")%>' ></asp:Label>
And what is the best way to achive this?
I use Visual Web Developer 2008 Express.I have Label1 in a DataList ItemTemplate. I wish to use a button to get the text from that label and add it to text in TextBox1 which is elsewhere on the page.I know how to do this from a standard label on a ASP.NET web page but cannot work out how to get the text from a label inside a DataList ItemTemplate.
HTML Code:
Protected Sub submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit.Click
TextBox1.Text = TextBox1.Text & " " & DataList1.ItemTemplates.ItemTemplate.Label2.Text
End Sub
I thought that because “ DataList1.ItemTemplates.ItemTemplate.Label2 - System.Web.UI.WebControls.Label “ - is what is written in the properties window header when I select the label in the DataList template.
I have a label in aspx page. I am trying to assign text to that label according to my search criteria. My problem is if i put that label (lblMsge) inside I am unable to assign the text from code behind. if i put that label outside the tr its working fine but the display is not proper. I tried by putting that label in div tags also.Here is my code.
[Code]....