How can I turn off the loading and downloading of Microsoft symbols?
I downloaded the Microsoft debug symbols for some other tasks but now I no longer want them for current debugging.
I'd like to keep them in the temp directory in case I want to turn them back on.
It's slowing down my debugging.
Some days ago all of my projects started working crazily - I'm using VS 2010, .NET 4.0, Silverlight 4 SDK, WP7 SDK. The previously compiled code parts can be debugged as they should be, but as soon as I make any change to the observed .cs file all symbols are ignored.
"The breakpoint will not currently be hit. The source code is different from the original version."
However, the compile is successful, moreover the changes in the code can be seen in the debug mode as well (e.g. if i add messagebox.show(...) it works as expected), but I'm unable to debug the project.
This happens to my Silverlight, WPF, WP7 solutions, Web Applications, so everything important. The most annoying thing is that I even reinstalled Visual Studio, the whole .NET Framework 4 Client Profile, but nothing changed.
I don't want to reinstall the whole OS, but this way i'm unable to work:/
I'm developing an ASP page and I noticed odd behaviour when I'm trying to step through server side call backs. Specifically some of the time, when I press F10 to execute the next statement the debugger acts like I pressed F5 to continue and takes off. Some of the time stepping works and some of the time it doens't. In addition, testing the same call back I can sometime step several times before it takes off and other times as soon as I click F10 it takes off. If I set explicit breakpoints it will always hit them but as I said, stepping often results in the debugger not stoping on the next statement.
I feel like I didn't have this earlier but I'm mystified as to why it is doing this
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
View 4 RepliesCan I install Microsoft Visual Studio 2010 Service Pack 1 in Microsoft Visual Web Developer 2010 Express?
View 1 RepliesWe have developed apllication in Microsoft VS 2008 and when we opening this same application with Microsoft VS 2010. Then it's asking to convert.
So can anybody tell me what it is converting exactly. Means it's open application in Microsoft VS 2010 and running properly also. But i am understanding whats happning while converting.
nfortunately, I can't get my breakpoints to work when in debug mode in Visual Studio 2008 (ASP.NET 3.5, Windows 7, IIS7). The website compiles and opens in debug mode, but the breakpoints themselves generate the following error message:"The breakpoint will not currently be hit. No symbols have been loaded for this document."There are some recommended solutions online, but for various reasons, either they haven't applied or I haven't been able to make them work. I've been trying to find the solution for about 12 hours now, and I'm getting desperate.(Note 1: This problem is specific to this website. I do have other websites that I open in VS2008 where the breakpoints work fine.)(Note 2: There is only one website/project associated with this problem. This website does not have multiple projects.)
View 1 RepliesI had an issue when I began working on my project, see this thread where I couldn't debug my DLL's. All I had to do to solve it, though it took me forevever to find this, was to hit F5. This doesn't make much sense since they are DLLs and I get a message that I can't run them directly, but whatever, it works. The output is generated as debuggable and I can copy it to my deployment directory and run and hit BPs (I attach to aspnet_wp).
My VS solution is four projects, all are DLLs, and one is called directly by my web application and it calls the others. There are two I am interested in debugging as I am enhancing them.
Maybe I jinxed myself, but I was actually musing recently that if I never figured out why I couldn't debug I'd never have progressed as much as I had in my task. Yesterday I backed up my project to a zip file - source and DLL's - because I was starting on a new piece. The only thing I did to the solution after that was move a module from App_LocalResources to App_Code, then I moved it back. And I added some code. When I tried to set BP's the next time I ran, I got "symbols not loaded". I haven't been able to debug since. I tried restoring the zip file since yesterday I could debug, but I didn't hit BPs there either. I will be researching this the rest of the day, I am sure, but I thought I would ask for specific since maybe I can tell you something that will you to know what I did wrong or you can throw out a question that will trigger to me what I am doing wrong. This is really not how I wanted to be spending a Friday.
I am a student of HLC, I am learning Visual Basic, they sended me lots of books and a CD with Microsoft Visual Studio 2008 Professional Edition. I have problem with installing it. There is the error;: "Setup Failed. Use the following links to research the source of the failure: There were errors during setup. Although the components were installed successfully, some setup errors were detected. View error log
For information on known setup issues, see the Microsoft Visual Studio readme file, readme.htm, located at the root of the installation source. For Knowledge Base articles on Visual Studio setup issues and solutions, see KB article 319714, HOW TO: Troubleshoot Visual Studio .NET Installation, at [URL]. To find help from other Visual Studio users, try the following newsgroups:
Visual Studio Setup
Microsoft Product Support
For details about this setup failure, see the setup
log files."
and
"The following component failed to installl: Microsoft Document Explorer 2008. The following components were not attempted: Microsoft Visual Studio Web Framework 3.0 Framework 3.5" and many other componetns. I have got Windows Vista Home Basic SP2 with 1.00 gb RAM and 2.00GHz. I all ready asked my tutor but he don't know how to make it work. There is no information on the web about this problem.
I need to write a paper on the comparison between (Microsoft Visual studio 2005 to develop web applications using asp.net) and (visual basic and Netbeans to develop j2ee applications using java).I need suggestions for good webpages,journals or documents which can help me out here. I have to write at least 1500 words
View 1 RepliesMicrosoft Visual Web Developer 2008 Express Edition not possible to open Visual Studio?
[Code]....
I currently doing a website that require to have a report for higher management, but i cant seem to have the crystal report tool in my MS Visual Web Developer.
View 2 RepliesI have upgraded to VS2010 recently. Now VS2010 is not opening i get an messg box displaying. Microsoft Visual Studio has encountered a problem and needs to close. We are sorry for the inconvenience. It automatically gets restarted and displays the same message. I have re-installed VS more than 3 times.
View 1 RepliesHow can i debug my deployed web service?
I have deployed a web service on my development machine and i am connecting it through my asp.net application, both web service and asp.net application are on same machine but web service is hosted on IIS.
I have 2 sollutions (1 CMS, 1 Customer specific with controls). The customer controls are coppied (with xcopy) to the CMS location. In the web.config of the CMS the specific controls are registered.The controls are useing functions from the CMS dll as well.How can I debug those two solutions as it where only one? I tried to start the CMS in debug mode with breakpoints in de CMS and customer controls, in this case only the breakpoints in the CMS are used. If I run the customer controls in debug mode only the braekpoint in this solution are used.The CMS is running on my local IIS 7.
View 1 RepliesI am using VS2010 and am working on an ASP.NET web application for .net 4.0.
I have created a file called StringUtilities.js and placed it in a subfolder of my application called Scripts.
The entire content of the file is listed here:
[Code]....
In one of my .aspx pages I have the following code:
[Code]....
On a button's "OnClientClick" (for example) I call the method encodeText() and everything works fine.
Today I added the method updateImage() which calls StringUtilities.js - updateAttribute() method, also added today.
If I open that unit in VS2010 and place a break point in the source code for the new method it turns white and says:
"The breakpoint will not currently be hit. No symbols have been loaded for this document.".
What gets even stranger (this is so hard to exaplain)....
Before today I did not have the method updateAttribute() in that .js file. So even though my source editor is showing all of my new source code changes, if I trace the previous method that did exists - htmlEncode(), the trace lines in the editor are highlighting where the lines "used" to be. which is near the top of that file as if my new code was not there.
It just sounds like there must be a different way of tracing javascript and the way I am doing it must not be it. I would have assumed it worked the same way I would trace my c# code.
When I ran Vista (x64) Prem with IIS7 and VS2008 sp1, I could press F5 and start debugging a web application and the debugge would run as long as I needed. I got a new PC that has Win 7 (x64). Now, the debugger will run 30-60 seconds and then quits. The web application still runs but the debugger shows that it is not in debug mode and the breakpoints are no longer hit. I know you can attach to the w3wp process and debug that way, but has anyone found a way to keep the debugger running for as long as you need when you press F5??
View 1 RepliesI have VWD Express and I can't debug lower layer methods in the application the debugger doesn't step into breakpoints that are set in these layers. what do I do? I need to debug lower layer assemblies most of the time.
View 10 RepliesI have vs 2003 & 2010 on same machine. But my application is in asp.net 1.1 so I have to work on VS 2003. (I dont have to migrate to 4.0).
I have followed this link http://msdn.microsoft.com/en-us/library/aa239576(v=vs.60).aspx but still it is not working.I put a break point on page load of my first login page. when I hit F5, the control comes to visual studio and make that line yellow but stays for few seconds only and then leave the contol and visual studio automatically.I'm not able to debug it. Don't know what the problem is.
I'm not sure if this is the correct forum for this but I was just wondering, I'm very new to Javascript programming and was wondering if their is a way to debug embedded JavaScript from Visual Studio, current and old versions?
View 7 RepliesI am developping an MVC3 RC2 application and just after hitting F5 on my asp web application, I am getting this error message program '[7780] w3wp.exe: Managed (v4.0.30319)' has exited with code -2 (0xfffffffe).So I am totally unable to debug my application
View 10 RepliesThe default ASP.NET web server that launches from within Visual Studio (Casini) is a little buggy on my development machine, so I like to publish to a local IIS instance on my dev machine and look at the web application there. However, I'm not automatically in "Debug Mode" when I launch the application this way.
I know that VS 2010 has an "Attach to Process" debug feature, but I'm not sure exactly how to use it. What do I need to do to be able to debug a local IIS ASP.NET web application from within Visual Studio? Specifically:
What settings do I need to change in the configuration of my web application?
What "Package/Publish Settings" do I need to change?
Is there anything I need to change in IIS?
Is there anything special I need to do in the "Attach to Process" screen?
Background Information: I'm running Visual Studio 2010 on Windows XP SP3 with IIS 5.1 and .NET 4.0.
Additional Information:
I should add that I've tried attaching to aspnet_wp.exe, but when I go to a page that I know has a breakpoint in it, I get the following message when I hover over the "open circle" breakpoint:
The breakpoint will not currently be hit. No symbols have been loaded for this document.
I had everything up and running fine, was able to debug and everything.
I could attach to process and run a SP in the database and it would fire over to VS stopping on the breakpoint.
I can't remember what I did to mess it up but I ended up uninstalling my DB and reinstalling it; SQL Server 2005.
Now when I try to attach nothing happens. The SP runs and that is it I never go back into VS.
I'm thinking I have to reinsatll VS now.
I have solution with several projects, while debugging it gives me this message.
I tired to change it's properties to enable debug but didn't work.
In my Visual Studio 2005, I am getting Hexadecimal numbers when I do a quick watch at all the integers in debug mode.
I am using VB.NET. What settings need to be changed in order to view integer values in decimal number system?
