WCF / ASMX :: Authentication Failed Because The Remote Party Has Closed The Transport Stream?
Nov 11, 2010
In Visual Studio 2005 I am following the steps to add a Web Reference to a web service.hings appear to go smoothly except for an error messae I am getting. Here are thesteps I follow along with the result.1. Right click on Web References folder and select "Add Web Reference..."2. When the dialog box appears I add the web service URL into the URL dialog box.The web service methods are then displayed in the dialog box with the links to each web service and a prompt to "Start Browsing for Web Service"However in the box to the right which is labeled "Web services found at this URL", there is an error messagewhich reads:There was an error downloading 'https://stage-serv/weatherQuote/WebService/weatherQuote.asmx
The underlying connection was closed: An unexpected error occurred on asend.Authentication failed because the remote party has closed the transport stream.I don't know what is causing this problem. I can reference this same web service on a productionserver just fine, but if I attempt to access it on the stagig server I get the message Ijust talked about.I am thinking that something is not configured on the staging server correctly.
View 3 Replies
Similar Messages:
Aug 19, 2010
I'm having a doozy of a problem, and can't find a solution. I have a WFC Web Service installed to a pair of servers, and accessed through a load balancer. I am accessing the service from an ASP.NET client app, also via WCF. The Client is not load balanced.I'm getting an intermittant error:
(Inner Most Exception) System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80(Middle Exception) System.Net.WebException: Unable to connect to the remote server(Outer Exception) System.ServiceModel.EndpointNotFoundException: Could not connect to http://<MYSite>/<MYApp>/<MYService>.svc.TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80.
I can reproduce this error with about 20% reliability if I execute the exact same page request on the client from 2 browsers at the same time. When the problem occurs, the successful page request returns in about 5 seconds, and the failed page request returns in about 30 seconds.I'm guessing that there is some additional latency when the load balancer decides to switch my session to another server, and that is making some timeout setting on my client to be exceeded. I need to research this performance characteristic... any thoughtsbut its not my core question.My core question is... Exactly what setting can I tweak to increase the "period of time" the "connected party" is allows to "properly respond".This is the basicHttpBinding configuration I am using on both sides of the communication:
<basicHttpBinding>
<binding name="LongerTimeout"
sendTimeout="03:00:00"
maxReceivedMessageSize="2147483647"
maxBufferPoolSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxStringContentLength="2147483647"/>
</binding>
</basicHttpBinding>
I've seen some indication that setting the receiveTimeout value on the server may help, but I set this to 1 second in a test environment, and was unable to reproduce the problem, leads me to believe its not worth a production environment change to verify this.
View 3 Replies
Sep 30, 2010
I have installed a web service in a client machine, its accessing a mapped network drive from a remote machine. But when its trying to read files from that file I'm getting this error
Code:
Message:
Authentication failed
Description:
QBWC1012: Authentication failed due to following error message.
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.IO.IOException: Logon failure: unknown user name or bad password.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalGetFileDirectoryNames(String path, String userPathOriginal, String searchPattern, Boolean includeFiles, Boolean includeDirs, SearchOption searchOption)
at System.IO.Directory.GetFiles(String path, String searchPattern, SearchOption searchOption)
at System.IO.Directory.GetFiles(String path, String searchPattern)
at WCWebService.WCWebService.authenticate(String strUserName, String strPassword) in C:inetpubwwwrootinvoicecreatews codeinvoicecreatewsWCWebService.asmx.cs:line 463
--- End of inner exception stack trace --- See QWCLog for more details. Remember to turn logging on.
I have supplied user crendentials also, the same web service working in another machine with the same mapped drive with the same user credentials. Manually I can map the drive using the credentials which I'm passing thru the application.
View 3 Replies
Oct 13, 2010
Server Error in '/' Application. The transport failed to connect to the server. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The transport failed to connect to the server.
Source Error:
[Code]....
View 4 Replies
Oct 14, 2010
This error stopping my work in my crucial time. The error is "The underlying connection was closed: The connection was closed unexpectedly.".There are multiple WCF service I created in my project. But when I am requesting only one service this error is coming. I compare with other service, no difference. The service works fine in the morning, but afternoon it stops working and raising error.
I installed Silverlight 3.0 Tools for 2008 Sp1, Silverlight 3.0 Developer, WCF RIA Beta and Silverlight 4.0 runtime in my system in the morning. After getting this error I uninstalled WCF RIA Beta. But same issue.Could not find any solution. Please assist me how to solve this issue.
View 2 Replies
Feb 15, 2011
i'm using asp.net 3.5 and my site is hosted on godaddy i have a contact us form on the site. and i have to send the contact queries on [URL] which is hosted on godaddy. whenever i try sending mails i get this error
The transport failed to connect to the server.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The transport failed to connect to the server.
Source Error:
[Code]....
Line 250: SmtpMail.SmtpServer = "smtpout.asia.secureserver.net";
Line 251: mailmsg.Priority = System.Web.Mail.MailPriority.Normal;
Line 252: SmtpMail.Send(mailmsg);
Line 253: }
Line 254: }
i tried changing smtp to relay-hosting.secureserver.net aswell. but it didn't work. i'm using this method of my classfile's sendmail class public void SendMessage(string From, string ToEmail, string subject,string body)
View 3 Replies
Apr 4, 2010
I am about to give up debugging SMTP servers to send email... My code is the following
SmtpClient mailClient = new SmtpClient("plus.smtp.mail.yahoo.com", 465);
mailClient.EnableSsl = true;
MailMessage message = new MailMessage();
message.To.Add("aditya15417@hotmail.com");
message.Subject = "permias-tucson-contact-us";
mailClient.Credentials = new NetworkCredential("myemail@yahoo.com", "mypassword");
MailAddress fromAddress = new MailAddress(Email.Text, Name.Text);
message.From = fromAddress;
mailClient.Send(message);
View 4 Replies
Aug 19, 2010
I'm getting a lot of these error messages in my logs on one of my servers and intermittently on two others.Googling didn't reveal very much information, mostly related to file uploads or downloads being interrupted. My pages are basically just text files with "ok" in them that only have .aspx extension for future plans, there's no actual code powering the pages. Servers are all Windows Server 2008 RC2 x64 running IIS7 / ASP.NET 4.Statistically it's happening well under 1% of the time but because of the volume of traffic that still clutters my event log with 2 or 3 of these messages per minute.Edit:tracked down the problem, setting buffering to true stopped it occurring.
View 2 Replies
May 7, 2015
I got an error "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond".when i am sending email when attachment.
protected void lbtn_DownloadForm_Click(object sender, EventArgs e)
{
using (StringWriter sw = new StringWriter())
{
using (HtmlTextWriter hw = new HtmlTextWriter(sw))
{
pnlPerson.RenderControl(hw);
[code]....
View 1 Replies
Apr 20, 2012
{"Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host."}
I get the above error when sending email...
View 1 Replies
Mar 23, 2010
I have an application written in VB.NET that sends XML to another server and it takes another XML. I am using HttpWebRequest in sending it but when I get the request stream I got this error. Please note that the application is working on my machine, but on the deployment on server I got this error.
View 4 Replies
Jul 7, 2010
my code
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
[code]...
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465Source Error:
[Code]....
Line 34: mailClient.EnableSsl = true;Line 35: mailClient.Timeout = 1000000; Line 36: mailClient.Send(mailMessage);Line 37: mailMessage.DeliveryNotificationOptions = DeliveryNotificationOptions.Delay;Line 38: mailMessage.DeliveryNotificationOptions = DeliveryNotificationOptions.OnFailure;
Source File: d:My
WebsitesBenefitsBenefitsDefault.aspx.cs Line: 36
Stack Trace:
[Code]....
[SocketException (0x274c): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465] System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) +239 System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP) +35 System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) +224[WebException: Unable to connect to the remote server] System.Net.ServicePoint.GetConnection(PooledStream PooledStream, Object owner, Boolean async, IPAddress& address, Socket& abortSocket, Socket& abortSocket6, Int32 timeout) +5482743 System.Net.PooledStream.Activate(Object owningObject, Boolean async, Int32 timeout, GeneralAsyncDelegate asyncCallback) +202 System.Net.PooledStream.Activate(Object owningObject, GeneralAsyncDelegate asyncCallback) +21 System.Net.ConnectionPool.GetConnection(Object owningObject, GeneralAsyncDelegate asyncCallback, Int32 creationTimeout) +332 System.Net.Mail.SmtpConnection.GetConnection(String host, Int32 port) +160 System.Net.Mail.SmtpTransport.GetConnection(String host, Int32 port) +159 System.Net.Mail.SmtpClient.GetConnection() +35 System.Net.Mail.SmtpClient.Send(MailMessage message) +1213[SmtpException: Failure sending mail.] System.Net.Mail.SmtpClient.Send(MailMessage message) +1531 Benefits_Default.Page_Load(Object sender, EventArgs e) in d:My WebsitesBenefitsBenefitsDefault.aspx.cs:36 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
View 3 Replies
May 7, 2015
I got server error when downloading pdf file from my webpage in asp.net."A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond in asp.net."
Code:
protected void btnPdf_Click(object sender, EventArgs e)
{
imgphoto.Src = "http://localhost:51350/Project/imagesLogin/black.png";
string imgurl = Convert.ToString(imgChart.ImageUrl);
imgurl = imgurl.Replace("~", "");
imgChart.ImageUrl = "D:/Project" + imgurl;
Chart1.Visible = false;
[code]....
View 1 Replies
Apr 21, 2010
I need to convert a web site using traditional ASP.Net login,membership/role with SQL to a custom system. I need to use a third party (CAS) authentication system while still using membership and roles to control access to content and User.Identity functions.What would be the best way to accomplish this? I use the <deny> and <allow> user throughout the site to control page access.
View 3 Replies
Nov 26, 2010
My scenario:I am using a web service which access the sql server database to provide an XML output. this part is working fine. I am using a SqlDataAdapter and DataTable with Fill method to get the data.
Problem:When more than one person access this web service at the same time i get the error message which is given in the subject line.
I understand the problem is because of the sql connection which is still open by the first user. If the first user completes his operation before the second users request then both the user receives the correct response.
My Solution:What i did was i initiated 10 connection strings and will check which connection string is closed and i have used this connection for the second persons request if they both access at the same time.
View 6 Replies
Mar 3, 2011
I have run into the issue on DataSet.WriteXml method. Apparently, if any row in a column in the DataSet has a null value, the entire column/rows will not write out in the xml file using the method DataSet.WriteXml. So, as terrible as that bug is, I need to send the data another way. Does anyone have any thoughts?
View 4 Replies
Feb 26, 2011
I have a WCF service which has 4 Operation contracts.
I have added a new contract and it gets the data from database and returns the result set.
I can access the new contract and the service get the correct result set. But while passing the result set to the client I get the error of The underlying connection was closed: The connection was closed unexpectedly.
What are the steps to follow after adding a new contract like new binding etc.
View 3 Replies
Feb 2, 2010
I understand that we can easily secure the menu pages by enabling SecurityTrimming and putting role information in web.sitemap.
But my problem is that we have to use a 3rd party authentication piece. The ASP.NET application gets the UserId and roles from the authentication module.
I need to show/hide ASP.NET pages based on the incoming user's roles.
Is it possible somehow to use web.sitemap with these roles?
Or should I come up with my own way to map a web page to role/s?
View 1 Replies
Feb 22, 2011
I have an excel file in my Response Output stream. I can Open the stream as a file after a prompt, but it doesn't seem I can save it directly to a specified folder on my client.
View 1 Replies
Oct 22, 2010
I'm receiving the following error occasionally when calling web service using a .NET 4.0 web application."The underlying connection was closed: An unexpected error occurred on a send."All of the articles I've read regarding this issue are for the Framework 1.1.Is there any solution to this issue for using .NET framework 4.0?
View 1 Replies
Aug 23, 2010
I am consuming a third party web service wsdl using my .net aps.net page. And I am getting following error message. Cannt get to resolve it. Its working on my machine but not in my development machine. I have installed the certificate also in certificates on that machine.
Error --> The underlying connection was closed: An unexpected error occurred on a send.
View 3 Replies
Jan 20, 2011
How do you guys debug your remote web services?
View 1 Replies
Jan 11, 2011
I am new to WCF, I have read where you can Bind to a MSMQ, my question is can you also bind to a remote queue running on a Unix box? If this is possible, how would you define your endpoint (address,bining) and what Binding type and binding configuration do you need to use?
using .NET 3.5, IBM WebSphere MQ on unix the QManager is running v6.0.
View 1 Replies
Apr 26, 2010
i need working example for remote file synchronization using WCF
View 1 Replies
Apr 13, 2010
We have two application created one for webservice and other application will call the methoddefined in webservice .The problem is we want to add webservice in our application dynamically
View 4 Replies
