WCF / ASMX :: Read/write Registry In Windows Server 2008 Using Web Service?
Dec 9, 2010
I create web service for Reading and writing the registry. It works fine in win-xp. But its not working when I published it in win-2008 server. It shows me http 500 error.
I am trying to access a wcf service hosted on a server running on a virtual machine on a windows 2008 R2 hyperv. When i access this service when running my asp.net website through code everything works fine how ever when i deploy the application on the local IIS , in the deployed mode i am getting an securityaccessdeined exception. My Asp.net app is running on a IIS server on another virtual machine. The stack trace is as given below :
Environment Info: My asp.net app has built on .NET 4.0 framework using VS2010. My WCF services are based on .NET2.0 framework. Event code: 3005
Event message: An unhandled exception has occurred.
We have an issue with a .NET 2.0 web service application that is generating a module not found exception when we try to load on server 2008. A second server running the same 2008 version loads the service fine.As part of the investigation we have taken the default hello world .NET 2.0 web service and deployed to both servers and have exactly the same issue with it running fine on one but not the other. The issue is trying to track down the module in question. Running process explorer and dependency walker doesn't seem to give us a clue.
In my windows service application (c#), I am checking if an event log exists then write to that event log, otherwise create new event log and write to it. But it always writes to the generic "Application" event log. Do I need to change some settings?
I am writing a web service for a customer. I tested it locally fine using a consumer, but he is having an issue calling it from his jquery, so he asked for logging.I figured I would use the Windows Event Log for this purpose. after I added the event log and was testing it locally via the consumer, I had an error saying The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security. So what I did to solve that was restart Visual Studio with administrator privelege so the event logs could be searched. And I am writing to my event log locally with no other issues.
My question is, when my customer intalls this new version of my web service, will it be able/unable to search the logs and if unable, how can it be given admin privelege so it is able, or again is that a bad idea?
I'd like to read data server-side from a web service that outputs in json format. I haven't found any good examples that don't use jquery and are server-side.
Specifically I'm looking at the "weight" field from this api:
Currently we are running an application build in VB6,ASP,Commerce Server2000 and Sql Server 2000. This application is running in Windows 2000 server.Now we are planning to migrate Windows server 2000 to Windows 2008.Will this application run in Windows 2008 or do we need to upgrade this application to dotnet and Sql 2008?
I have just started building an asp.net web service with visual studio 2005. However whenever i try and run the site i get this message, saying "debugging failed because integrated windows authentication is not enabled". I am at a loss of how to correct this problem.
I have a web service within my application (app A) writing to an oracle database (database resides on a different server). when i call the web service from another application (app B), it fails to write to the database. when the web service is called from app A, it successfully writes to the database.
I guess this issue has to do with authentication/impersonation of ASP.NET. both applications (A & B ) are subsites within the same website in IIS and both uses windows authentication (intranet applications). I dont have access to the server and IIS.
I Need by service contract to return the xml/json result depending on the request type. function which will convert my result set (i am using linq to sql) so that i do not need to create the xml format for the result set by iterating through the table row many times.What is the suitable way to do that.
I need a kind of short cut method which will convert the table data to xml result.Had i been using asp.net mvc i would have been able to generate the xml data by overriding the the ExecuteResult method in the ActionResult and giving Conetnt-Type = "text/xml" as OP.But since i am using Wcf i don't have the controller context(as controller context is the parameter that needs to be passed to Execute Result).
My present code for converting the table data to the xml format is below.
public XDocument UsersLists(string authToken) { bool IsAuthenticated = Authenticate(authToken); XDocument xDoc = new XDocument(); XElement root = new XElement("Users");
[Code]....
I need to eliminate this way of generating xml for each table records.
Microsoft Visual Studio 2010 was being used along with SQL Express for website development on the Operating System, Windows Server 2008 R2 Enterprise Edition of Intel Xeon CPU @ 2.13 GHz (2 Processors) containing 12 GB RAM with 64-bit Operating System. Website was developed along with the databases of SQL Express with the help of Visual Studio. Whether the developed website along with the databases may be used on the Operating System, Windows 7 of 64-bit? The website will used within Intranet. Which Operating System and configuration to be used for the Intranet Website?
I've installed IIS for Windows Server 2008 SP2 and Windows 7. In both instances, I can't get even the simplest of ASP.net scripts to work (note: I'm ftping the published files from Visual Web Dev 2008 Express on XP):
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error
[Code]....
Line 36: ASP.NET to identify an incoming user.Line 37: -->Line 38: <authentication mode="Windows"/>Line 39: <!--Line 40: The <customErrors> section enables configuration Source File: C:inetpubwwwroot estweb.config Line: 38
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a
<customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
I just downloaded and installled the Microsoft Windows Azure SDK yesterday for the first time and I am having issues running the application as I all I am getting is 503 errors. I run Windows Server 2008 R2 on my development machine and even tested it on another co-workers 2008 R2 and couldn't even compile the application. He got this error instead "A problem occurred while trying to set the "References" parameter for the IDE's in-process compiler. Error HRESULT E_FAIL has been returned from a call to a COM component."
From within my Windows Server 2008 R2 Hyper-V Virtual Windows 7 x86 enviroment, I was able to successfully build and run the Windows Azure SDK and it even showed the base ASP.NET application.So my question is, does the Windows Azure SDK for Visual Studio 2010 w/ Visual Studio 2010 SP 1 installed not work under Microsoft Server 2008 R2?
I'm fairly new to .NET development so I might be missing something very simple here. I'm trying to set up a web service as a data item so that I can bind it to a control on my page. I was reading some tutorials about doing this in an earlier version which seemed very simple. All you had to do was add the web reference, create a data source and use the object type, pick the web service and enter the name of the call that would retrieve the data.
In 2008 the object data source type doesn't seem to be available anymore when creating a new item unde app_data. I get options for SQL Server, XML and XML schema. I've tried adding an existing source and picking each of the files generated for my web service reference, with no success. I suspect that I have to use one of the XML options, though at this point my web service is a simple thing that only returns some strings for prototyping purposes (I'm not the one writing the web service, just the front ends. Our other developer hasn't come up with a stub service yet). I know there must be some way to set a web service up as a business object so that you can bind it to a control like a gridview.
1. ADO.NET Data Service with Visual Studio 2008 and the .NET 3.5 SP
2. WCF Data Service using Visual Studio 2010 and they both work in IE.
I can make a Service Reference to the first one with VS2008.
The problem is when I try to use Visual Studio 2008 as a client and I try to add a Service Reference for the WCF Data Service made with Visual Studio 2010:
an Error (Details) occurred while attempting to find services at '
and the Detail is: DS_InvalidMetadataFile Parameter name: edmxDocument
the xml of the 2 services is perfectly the same (with the exception of the url in the "base" attribute in the service node)
I have looked at all the posts I can find on this problem and tried everything I can think of, but still the problem persists. I am getting really sick of it.was working fine for the last year until an update to MS Office 2007 caused a lot of problems (automatic update). After checking posts here, I removed it completely. No change. I then tried all the things I could find on other posts, also no change. Today, I removed VS and the Web Authoring Component and re-installed. Still no go.
Does anyone have a fix for this problem. It seems that it has been around a long time, but is still giving problems. I even saw one suggestion to reformat the drive! You've got to be joking!
I am looking at developing using Visual Studio 2010/2008 and SQL Server 2008 on Windows 7. Should I be able to do this on Windows 7 Professional, or do you need Windows 7 Ultimate?
I have to write a application which connects to remote server(windows 2003 server, open SQL Management studio in that server and enter a specific SQL Server address and access a stored procedure, change some values and execute the stored procedure.)
I have to write this application using C#.Net , Could anybody point me in right direction, Where do I start?
I would like to know your libraries recommendations to read and write Excel applications on ASP .NET website. I have tried GemBox and NPOI, because they don't required Excel to be installed on the server, but they have some limitations on handling Excel files that are marked to read only.
