Web Forms :: Capturing Data From Dynamic Controls On Button Click
Dec 29, 2010
I've created a number of identical controls in a varying number depending on how many employees are under a supervisor. What I am trying to do now is to see which set of controls are checked via a checkbox and return a value from the label field in that particular set. Here is my code:
[Code]....
What I am trying to grab in particualr is the PayRoll Label. I've named sequentially as "lblPayRoll" + the counter. Which from what I think I should be able to do is get the total count of my array and from then loop through the controls and grab the label data.
Problem is that I can get the data, but it disappears after I click the button to grab it. I think I am saving everything to the viewstate, but they just disappear.
View 9 Replies
Similar Messages:
Jul 24, 2013
im creating dynamic buttons on page load and on the click event of button1 handlere iam creating more buttons this is going fine but on click event of button 2 work is not done so how to maintain a chain of creation of button on click events
protected void Button2_Click(object sender, EventArgs e)//
{
ClientScript.RegisterClientScriptBlock(this.GetType(), ((Button)sender).ID, "<script>alert('Button_Click');</script>");
Response.Write(DateTime.Now.ToString() + ": " + ((Button)sender).ID + " was clicked");
}
protected void Button_Click(object sender, EventArgs e)//this button click will call all the items related to department
[code]....
View 1 Replies
Mar 7, 2011
I have a grid view with the following structure
[Code]....
Here is the scenario:
The data is populated in the gridview dynamically at runtime The number of rows vary each time The auto postback event has been set to true I need to capture the rows that are selected, When I try to capture the button click event; the gridview is null(I understand that it has to be rebound on each postback). Hence this is not working
[Code]....
I also tried this, the rowcommand event; It is also not getting generated. The gridview rowcommand is not getting fired
[Code]....
I need the rows which are selected using the checkbox in the above mentioned sceanrio.
View 4 Replies
Jan 25, 2010
I have page (inheriting from master page) in which I have a dynamic Grid view (columns are not defined at design time), but gird is binded from xml at run time.
From code behind, I am adding a LinkButton into a single column in Gridview as
[code]....
But when I click on the link button, it does a post back, but the Click Handler is not called? Also in the same page i have an asp:button, from javascript I am doing document.getElementByID('someid').click(), this also causes a postback but the button click handler on server is not invoked?
View 2 Replies
May 7, 2015
How to read values of asp: table in grid view after binding.
I want to get values one by one in label in for loop and read values of table row one by one.
Like if i put check box in gridview and the row which is selected , i want to read value that asp:table in gridview.
How I bind grid, code attached.
Private Sub gvTransactionsBind(ByVal qry As String)
Dim adp As New SqlDataAdapter(qry, ConString)
adp.SelectCommand.CommandType = CommandType.Text
Dim ds As New DataSet
adp.Fill(ds)
gvTransactions.DataSource = ds
[Code] ....
View 1 Replies
Jun 15, 2013
I have created a web form in which i have used user control there is link button on different link button user control loads . i have added dynamically webcontrol to that link button . they are loading properly but when i try to save data through one of user control on click of button the user control disapper from that place but when i put static user control to my page its working
View 1 Replies
Mar 4, 2013
I have one dropdownlist,one textbox control and one button control.
Now i want to show value in repeater control like this when i click on button.
dropdownvalue1 texboxvalue1
dropdownvalue2 textboxvalue2
dropdownvalue3 textboxvalue3
I need that value in literal controls which is in repeater control.
View 1 Replies
Apr 9, 2014
On grid RowDataBound based on some condition i've added imagebutton dynamically. parallelly i want to add event for this button click. here is my code snippet.
protected void GV3_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType == DataControlRowType.DataRow)
{
TableCell cell = new TableCell();
ImageButton bttn = new ImageButton();
[Code]...
That message popup box comes, but i'm unable to catch that click event. while click on a row i want to delete that row, so want to create event dynamically. for that i've used this following dynamic click event
bttn.Click += new ImageClickEventHandler(b_Click);
private void b_Click(object sender, EventArgs e)
{
//delete record
}
but this above code also not working.
View 1 Replies
Aug 18, 2015
As per you sample : [URL] ...
How do I add maximum rows that can be added ?
View 1 Replies
Mar 16, 2010
I work with dynamic webuser controls. Depending on a choice in a dropdownlist, I load the webuser controls from my database. In the Page_Load event, I load the controls. When the controls are loaded and a button is pressed, the values that are filled in,in the webuser controls' textboxes, must be saved in the database. when I click the button, the values of the textboxes are empty again. Here's my code:
[Code]....
View 5 Replies
Aug 10, 2010
I have a dynamic Table which contain 8 rows and 8 Colums
Table t = new Table();
TableRow rr = new TableRow();
TableCell cc = new TableCell();
and in the each Cell CC I add a dynamic Button(Or Linkbtn)
LinkButton LB1 = new LinkButton();
LB1.Text = "AM";
LB1.ID ="Link1";
cc.Controls.Add(LB1);
rr.Cells.Add(cc);
LB1.Click += new EventHandler(LB1_Click);
t.Rows.Add(rr);
i have a table with 8 rows , 8 colums and each cell contain a LinkButton (which diffrent in IDs) I want to add Lable in the same cell of this LinkBtn(LB1) which it clicked but I cann't What shoud I write here?
void LB1_Click(object sender, EventArgs e)
{
// throw new NotImplementedException();
}
View 1 Replies
Dec 11, 2010
Label4.Text += "<div id ="showdiv" + i + ""> " +
" <table style=width:100%;> " +
" <input type=text style='width: 193px' id=cusno " name=cusno "
[code]...
View 10 Replies
Nov 16, 2010
I have a dropdown on page, a place holder and a save button on my form.Now, I am creating a textbox on selectedIndexChanged event of dropdown list and adding it to placeholder. And on button click I want to access the control, but on click event, I find the textbox as null. Here is my code
protected void Dropdownlist1_SelectedIndexChanged(object sender, EventArgs e)
{
if (Dropdownlist1.SelectedValue != string.Empty)
And button Save click event
protected void btnSave_Click(object sender, EventArgs e)
{
TextBox txt = new TextBox();
txt = (TextBox)this.ElementPlaceHolder.FindControl("txtArea");
[Code]....
View 1 Replies
Jan 16, 2011
i have a web form in which i ve a button which will open a sliding pop up box(jquery) on click of it. In the same page i ve also a linkbutton for downloading files. Now the problem is first time wen i click that button it does nothing. (will not open popup box). Once i click on download button and then if i click that button it will open popup box along with download dialog box. Why is it happening so... is it because am using same event click for both these.
but download option is implemented in gridview_rowcommand()..
View 2 Replies
Mar 2, 2011
What is a good way:
I have page1.aspx contains (Next button), it redirects to Page2.aspx. Page2.aspx has a back button that redirects to page1.aspx
I want to capture the action if page2.aspx (back button was clicked) and it made it redirect to page1.aspx page.
Reason is because if the back button is clicked at if (!IsPostBack) {...} I will reload the data that was entered when going from page1 to page2.
I know I can use a querystring, but dont want it cause it can be modified by the user. and dont want to use session, unless its the only way.
View 12 Replies
Dec 21, 2010
I am working on an ASP.NET web application using .net 4.0 and VS2010.
I have a GridView and I am appending a row at the bottom to allow users to input data for "Adding" a new record.
The ONLY way I have found for this to work is to do this in the RowDataBound event of the grid. I can check to see if it is about to process the footer row then I know I am at the bottom and can insert this new row.
The row I am inserting contains a couple of TextBoxes and a LinkButton for the "Add" link.
If I just drop a LinkButton on my form and hook up the click event and I click the link button then the first thing that fires is the Page_Load event then my click event. However what is happening when I click the link button that was dynamically added to the GridView is the Page_Load event fires but the click event never does.
I have read 1000 threads saying to try to create the controls in the preinit() or some other event. In my case I can't. Or else someone would have to explain how to add the row to the bottom of the databound GridView.
Here is my code: (I removed creating the Textboxes because that is not part of the problem.
[Code]....
View 10 Replies
Sep 14, 2010
I'm trying to fix a problem with some code (not written by me)
lnkbtnPageNumber.ID = "PageNumberCustomerRef" + intPageNumber.ToString();
lnkbtnPageNumber.Command += new CommandEventHandler(lnkbtnPageNumber_Command);
lnkbtnPageNumber.CommandName = "DepotRef";
lnkbtnPageNumber.CommandArgument = intPageNumber.ToString();
lnkbtnPageNumber.Text = intPageNumber.ToString().PadLeft(3, '0');
lnkbtnPageNumber.Attributes.Add("style", "margin: 2px;");
pDepotRefPages.Controls.Add(lnkbtnPageNumber);
This code creates a link button, however when I click on the button on the page. The function lnkbtnPageNumber_Command is not being called. The scripts just not getting to it.
I've tried google but everywhere I've looked says that this code should work fine.
Here is the code which is being called by the function:
void lnkbtnPageNumber_Command(object sender, CommandEventArgs e)
{
try
{
switch (e.CommandName)
{
case "GlobalID":
gintDocketNumberPage = Convert.ToInt32(e.CommandArgument);
break;
case "CreatedDate":
gintCreationDatePage = Convert.ToInt32(e.CommandArgument);
break;
case "Accounts":
gintAccountPage = Convert.ToInt32(e.CommandArgument);
break;
case "CustomerRef":
gintCustomerRef = Convert.ToInt32(e.CommandArgument);
break;
case "DepotRef":
gintDepotRef = Convert.ToInt32(e.CommandArgument);
break;
default:
gintDocketNumberPage = Convert.ToInt32(e.CommandArgument);
break;
}
I've just read somewhere that this code won't work unless called from Page_Init which if true is a but of a pain cos I can't put this fuction in Page_Init...
View 1 Replies
Mar 3, 2011
I am able to capture click event any where on my form but there is an Iframe on my page when I click on that it doesn't get capture.
here is a code.
document.onclick = function(e) { alert(e.clientX + "|" + e.clientY); }
View 2 Replies
Feb 25, 2011
how to get the dynamic link button text on click of it.....
View 3 Replies
Oct 16, 2010
I have a html table, which I created dynamically. I can add rows at run time in it.In each row I have a file upload control and an upload button by side of it in a cell.I want to know how can I handle the click event of these buttons because they are generated in a for loop dynamically.
1st row ... | btn | if a new row is added, 2nd row will be visible.
2nd row ... | btn |
View 1 Replies
Jul 28, 2010
I am adding some dynamic image buttons to a form in my code behind (vb.net) and added a click event handler, but it never fires. Also when I click on a button the page posts back and everything below my update panel disappears.
code behind
[Code]....
Click handler
[Code]....
Here is my aspx page code.
[Code]....
View 5 Replies
Oct 27, 2010
I want to create dynamic buttons on button click event(for example., btnCreateDynamic_Click).
I tried creating dynamic buttons on page_load event and Pre_int event.They are all working but i want to create them in button click event. How can i do this in c# asp.net?
View 2 Replies
Feb 25, 2016
How should I go about removing dynamic control.I have a method that does the removing currently, however, it doesn't remove when postback..Here's my code
HTML
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Main.aspx.cs" Inherits="DynamicTools.Main" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
[code]....
View 1 Replies
Feb 15, 2010
I have two pages, the first one displays a list of products in a gridview, one column in the gridview is a hyperlink, this can be clicked on to get further details about the product. Each row in the gridview can be selected, certain details are added to an array (including the hyperlink column). I them want to display these details on page number two. All details are displayed except the hyperlink field.Has anybody any ideas as to what I'm doing wrong? The code is as follows:
[Code]....
and the second page:
[Code]....
View 6 Replies
Feb 28, 2010
I have a GridView control bound to an AccessDataSource. After selecting a row I'm creating a table inside the selected row. I'm adding Buttons to this table. Their Click event never gets fired. I read about recreating the buttons and stuff, but still no luck solving the issue.
[code]....
View 1 Replies