Web Forms :: Error - Session State Can Only Be Used When EnableSessionState Is Set To True
Nov 3, 2012
I've a class named baseClass.I can't access session variables from that class.This is the error i've got.
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
View 1 Replies
Similar Messages:
Dec 7, 2010
Have not run the ASP.NET Development Server for a while. Today I copied a production website to my workstation and ran it with VS 2008. The following error message popped up. What is the problem with the ASP.NET development Server on my workstation? The website on the Production server still ran okay.Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of KEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection.
If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
View 2 Replies
Nov 18, 2010
I read the solutioin for this error, at the following link :http://forums.asp.net/p/1046935/1576341.aspxbut I am still not clear what exactly causes the error. I have two doubts :1. Can anyone please elaborate a bit on this issue, with any example ????2. Is there any drawback of this approach ?
View 4 Replies
Mar 30, 2010
Can anyone explain to me why this first example works fine but the second, which would use a little less code and in my mind appears to achieve the same result, yet throws a null ref error?
This works ...
if (Session["sid"] == null || Session["sid"].ToString() == "")
{
// session is NOT valid.
}
else
{
// session is valid.
}
This does not work?
if (String.IsNullOrEmpty(Session["sid"].ToString()))
{
// session is NOT valid.
}
else
{
// session is valid.
}
View 5 Replies
Feb 24, 2011
I receive the error message "Error: Your session has expired. Please refresh your browser." When I export a table in ASP to Excel. I know for a fact that the correct data to export exists. Everything works fine except for this error message. I don't see how the session on a browser could run out in a matter of the one second it takes for the Excel file to pop up
View 2 Replies
Jul 19, 2010
I use custom session state provider (appfabric). I marked my pagecontroller class with [Serializable]. When i redirect a page i get error HttpContext is not marked as serializable. I have a property in pagecontroller class;
[Code]....
Is this piece of code may be the main reason for serialization error ? I use the it nearly everywhere, so i can not simply detach and test it.
View 3 Replies
Aug 4, 2010
I have method called BindProductDetails in ProductDetails.cs as follow.
protected void BindProductDetails(int vehicleId)
{
String sLocale=Some.DataProvider.ListData.GetCulture(System.Web.HttpContext.Current.Session["CountryCode"].ToString());
[code]....
This method returns culture ="en-US" if CountryCode passed is "US".And GetProductDetails method used in ProductDetails.cs is follow
public static Product GetProductDetails(int productId,string CountryCode,string LanguageCulture)
{
sLocale = Some.DataProvider.ListData.GetCulture(System.Web.HttpContext.Current.Session["CountryCode"].ToString());[code]....
I try to get sLocale variable to "en-US" if Countrycode passed is "US" in session.I get Object reference not set to an instance of an object error near
StringsLocale=Some.DataProvider.ListData.GetCulture(System.Web.HttpContext.Current.Session["CountryCode"].ToString()); in ProductDetails.cs page.This method works fine in all other page,but here it is showing error.If I hard code Session to US then it works fine.I think it is not reading session.
View 3 Replies
Feb 16, 2010
In ASP.NET, I'm a bit confused about role of cookies in session state. Whats is the difference between normal session state and cookieless session state?
View 5 Replies
Jan 17, 2011
I would like to know if the way i'm dealing with session variables is the right way, and also how to fix this error i'm getting:
FormatException: Input string was not in a correct format.
View 4 Replies
Sep 5, 2010
i make a web site using frame but session is expire message is
Object reference not set to an instance of an object
Description: HTTP 500. Error processing request.
Stack Trace:
System.NullReferenceException: Object reference not set to an instance of an object at System.Web.UI.Control.OnLoad (System.EventArgs e) [0x00000] in <filename unknown>:0 at System.Web.UI.Control.LoadRecursive () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessLoad () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessPostData () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.InternalProcessRequest () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 My Web Config file is<configuration> <!-- store the database connection info here --> <appSettings> <add key="sBook_StoreDBConnectionString" value="Provider=Microsoft.Jet.OLEDB.4.0;User ID=Admin;Data Source=C:Program FilesCodeChargeExamplesBookStoreBookStore_MSAccess.mdb;Persist Security Info=False" /> </appSettings> <system.web> <httpRuntime executionTimeout="1000" maxRequestLength="2000000" /> <!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to false will improve runtime performance of this application. Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="c#" debug="true" /> <!-- CUSTOM ERROR MESSAGES Set mode="on" or "remoteonly" to enable custom error messages, "off" to disable. Add <error> tags for each of the errors you want to handle. --> <customErrors mode="Off"/> <!--<customErrors mode="On" defaultRedirect="Login.aspx"> <error statusCode="500" redirect="Login.aspx"/> <error statusCode="404" redirect="Login.aspx"/> <error statusCode="403" redirect="Login.aspx"/></customErrors> --> <!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None" --> <authentication mode="None" /> <!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> <!-- SESSION STATE SETTINGS By default ASP .NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=localhost:42424" cookieless="false" timeout="60" /> <!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" /> </system.web> <connectionStrings> <add name="mydb" connectionString="Server=localhost;User=SYSDBA;Password=datacenter;Database=/opt/db/erp2.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> <add name="mydb2" connectionString="Server=localhost;User=blackberry;Password=acgmkRMS;Database=/opt/db/pwd.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> </connectionStrings></configuration>
View 2 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
May 8, 2010
My dropdown controls do not keep the values after postback even though their EnableViewState is = true and in Page_Load I fill my controls ONLY if not postback.
My controls are inside a panel and the panel's EnableViewState is set to true as well...
To see the page you can log in as test and password is 12345
click on search page and set a value to say Gender and Ethnicity and click submit.
You will see the results, then navigate to number 2 or 3... You will see that it refreshes the controls and sets them to default.
View 7 Replies
Mar 15, 2010
I have a small 4-page application for my customers to work through. They fill out information. If they let it sit too long, and the Session timeout out, I want to pop up a javascript alert that their session has expired, and that they need to start over. At that point, then redirected to the beginning page of the application.
I'm getting some strange behavior. I'm stepping through code, forcing my Sessioni.IsNewSession to be true. At this point, I write out a call to Javascript to a Literal Control placed at the bottom of the . The javascript is called, and the redirection occurs.
However, what is happening is.. I am pressing a button which is more or less a "Next Page" button and triggering this code. The next page is being displayed, and then the Alert and redirection occurs. The result I was expecting was to stay on the same page I received the "Timeout", with the alert to pop-up over it, then redirection.
I'm checking for Session.IsNewSession in a BaseClass for these pages, overriding the OnInit event.
View 1 Replies
Feb 3, 2011
I am getting the following error as Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation. when an invalid value is passed in dropdown with autopostback=true. What should I do. I want the solution with "EventValidation=true" and "ValidateRequest=true" in the Page directives. Also without any Custom Error Pages Enabled in web.config file i.e Custom Error Pages are off in web.config file.
View 3 Replies
Feb 18, 2010
I am trying to redirect to the same page with different query string parameters
HttpResponse resp = HttpContext.Current.Response;
resp.Redirect(landingPagePath)
To avoid further processing after redirection i check if
HttpContext.Current.Session.IsNewSession == false
but for some reason i found that this is not always the case after redirection
View 2 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
Jan 21, 2011
I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
View 2 Replies
Feb 2, 2011
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
View 9 Replies
Nov 1, 2010
All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
View 8 Replies
Apr 29, 2010
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
View 7 Replies
Oct 27, 2010
The fix for this error message is to run [Code]..... I have run that uptown, downtown and in my lady's chamber and it does no good, although it never complains. Are there any other possibilities?Details:
IIS Server: v5.1 running on XP. SQLServer 2005 running on a different XP box.Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618 There is an ASPState database on the server, containing only two tables: [Code].... and [Code]..... I did not use [Code].... when I ran [Code]....
.
View 2 Replies
Dec 3, 2010
I am building a web app that is limited to one database, therefore I cannot use the ASP.NET config tool. As a quick means of getting this app online, I tried to use a simple session variable. The login page verifies the user's credentials, and if they pass, it sets the session variable to a certain value. All other pages check in the page_load event whether or not the session variable is equal to that value. The problem is that once being logged in for a short while and sending and recieving some data, the session variable resets, and I'm returned to the login page to repeat the process. Here's the basic code from my webforms:
[code]....
Is there some setting I need to change in the web.config file to adjust the cookie timeout or is that only for the config tool authentication methods?
View 5 Replies
Feb 13, 2011
Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 Replies
