I have parent form in which i have two buttons. button1 and button2. By clicking on button1 a model popup widow shows. In popup window i have a button like button3 what i need that by cliking on button3 on popup page i want to fire button2 event on parent page and close popup page.
View 1 RepliesI'm working on a questionnaire type application in which questions are stored in a database. Therefore, I create my controls dynamically on every Page.OnLoad.This works like a charm and ViewState is persisted between postbacks because I ensure that my dynamic controls always have the same generated Control.ID.
In addition to the user control that dynamically populates the questions, my questionnaire page also contains a 'Status' section (also encapsulated by a user control) which represents the status of the questionnaire (choices are 'Complete', 'Started' or 'In Progress'). If the user changes the status of questionnaire (i.e. from 'In Progress' to 'Complete'), I need to postback to the server because the contents of the dynamic portion of the questionnaire depend on the selected status.
Some questions are always present regardless of status, and yet others may not be present at all for the selected status. The point is, when the status changes, I have to postback to the page and render the right set of questions. Additionally, I need to preserve any user entered values for those questions which are 'always available'.
However, due to the page life cycle in ASP.NET, the 'Status' user control's OnLoad, which contains the correct status needed to load the right questions from the DB, doesn't get executed until after the 'dynamic questions' user control has already been populated (with the wrong/stale values).
To get around this, I raise an event from my 'Status' user control to the main page to indicate that the Status has changed. The main page then raises an event on the 'dynamic questions' user control. Since by the time this event bubbles up, the 'dynamic questions' user control has already loaded the 'wrong' questions from the DB, it first calls Controls.Clear. It then happily uses the new status to query the database for the 'correct' questions and does a Control.Add() on each. FYI, Control.IDs are consistent across postbacks.
This solution works...sorta. The correct set of questions for the selected status do get rendered; however ViewState is getting lost for those 'always available' questions. I'm guessing this is because the 'dynamic questions' user control calls Controls.Clear when responding to the status changed event. This must somehow kill the association between ViewState and my dynamic controls, even though the Control.IDs are consistent.
This seems like such a common requirement, I'm virtually certain there is a better, cleaner and less error prone approach to accomplish this. In case its not plainly obvious, I haven't been able to grok the ASP.NET page life-cycle despite working with it for the last year.
I have a 2 part question for web user controls: 1. I want to have an event fire in my user control, but have it be consumed by the parent page, like:
<asp1:Object id="objectMain" runat="server" OnClick="Click" />
Is it possible to do this? Or do I need to make a server control for this functionality? I have it being able to be set in the Page_Init, but I'd like to make it as similar to actual controls as possible. Also, if it is possible to access via the Events section under Properties, that would be good and 2. I am trying to register the web user control as an AsyncPostbackTrigger for another UpdatePanel. With the previous question in mind, is it also possible to set this via the GUI, or does this need to be set programmatically as well?
since APS.Net 4.0 I have a curious problem with an event.
There is a FormView and inside of the EditItem there is a GridView. In the Footer of the GridView I put Controls for inserting records.
But when I fire a markup defined RowCommand of that GridView then the same event is getting fired for the Parent FormView. First I had 'Insert' as the CommandName and so I was getting the Error that my FormView had to be in insert mode to insert a record. Then I changed the RowCommand of the GridView to 'xxx' and I got also the RowCommand 'xxx' at the RowCommand eventhandler of the Parent FormView.
The project was migrated from .Net 3.5 a few days ago, but nothing was manually changed in the code/markup. And the problem was not there with the "old" framework.
[Code]....
Of course, I could simply change the CommanName of the LinkButton e.g. to 'InsertChild' but I would like to know:
Is this a known change or a bug of ASP.Net 4.0?
I have one Datagrid with Footer. Footer Row Contains Input fields with one Button to add New Values. I have button click event but not getting fires. my code follows:
[code]....
Simple and blunt: my cascading dropdownlists clear when a postback occurs. Does anyone know a quick way around that?For more information, read on...
I have 5 dropdown lists that define a training class location and line of business: Site, Parent Client, Client, Program, Project I'm trying to build cascading dropdownlists that can work from any direction (i.e. select a site and all other lists are filtered by site...select a project and all other dropdown lists are filtered by project). I've built the SQL Select statement behind the lists that filters (accurately).
i want to access the child datagrid controls from parent datagrid command event.
View 4 RepliesI have a label control. I added table dynamically into the label. and dynamically buttons into table cells. On button click of each cell raises a popup where I can add a item. Now I have a problem, My table is not refreshing when I added the items and closed the popup. But they are adding on the next event raise.
View 5 RepliesI have write the code in .Net. When I click the Buttun then fired below event.
protected void ddldesignation_SelectedIndexChanged(object sender, EventArgs e)
{
Code.
}
I have a button which has a click event but its not firing on the first click. I suspect its something to do with that i am in dropdown box control so when i click the Button the event for the dropdown box occurs (textChanged) but it forgets about the click event
Of course if i click it a second time it works.
Or if i click somewhere else first so that the event TextChange occurs and then click the Button the first time it executes..
Is this normal and what are more workarounds if any?
basically the TextChange event must fire but the button click event must fire as well.
All the events i am talking about are ASP.NET events.
here is some examples of the events i am using - both the button and dropdown
uxGetData is a button and uxToDate is a dropdown box
[code]....
i have a problem with my dynamic button.
This is my scriptcode, i would like to create a dynamic Listbox and a dynamic button. But after click on this button, the event in addressOf btnListEinfuegen_Click is doing nothing. It does not run.
[Code]....
what ist wrong in my script? Why does my button not fire?
This should be an easy solution but I get stuck with it and hope I can get some advice/guidance from you:I have a simple aspx page with a Paypal button in it. The code shows in .aspx page:
[Code]....
Am I doing someting wrong,my event only seem to fire when I click the button,but the text-box does not cause a postback.
[Code...]
I have a simple form with 2 radio button grouped. I´m trying to hide/show a DropDown Listbox with the event CheckedChanged, but this event never fires...
<asp:RadioButton ID="AgruparPorCategoriaRadio" runat="server" GroupName="CategoriaFechaRadio" Text="CategorÃa"/>
<br />
<asp:RadioButton ID="AgruparPorFechaRadio" runat="server" GroupName="CategoriaFechaRadio" Text="Fecha" />
AND THE CODE BEHIND:
Protected Sub AgruparPorCategoriaRadio_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles AgruparPorCategoriaRadio.CheckedChanged
AnticipacionList.SelectedIndex = 0
AnticipacionList.Visible = False
TemasList.Visible = True
ActividadesGrid.DataBind()
End Sub
I am trying to fire one event out of two avalible events based on a check box selectoin, I have already registered the two events in the page_load() and i check if the check box is checked (checkbox is located within a gridview) then i un-register one of the events and just keep one events registered as following(Only relative part is shown):
[Code]....
I am trying to fire one event only based on the checkbox selection. I tryed to debug and noticed that, in fact, both evetns always get fired starting first with Button_SessionStartOrEnd_StartSessino and then Button_SessionStartOrEnd_EndSessino. So how can i fire one event only? please note that my code to check if the ckeckbox is checked within the girdview works fine.
I'm trying to manually create a button and add a Click event handler for it in code. However when the button is clicked the event handler doesn't seem to react on event (or event isn't called).
we tested the code in Visual Studio 2008 and everything worked just as it should. And I'm using Visual Web Developer 2005 XE. So I assume that I'm missing something to be done manually being in VWD 2005 XE, or the problem is in VWD 2005 XE it self.
here is what I'm doing:
[Code]....
I have a button on a webform. On button click event the following functions execute:
1. Fetch data from one instance of sql server
2. and insert the same data in another instance of sql server
above function is working fine.
My curiosity is that, is there any way through which my above functionality run after every 15 minutes without opening the webpage.
I have a parent page with two data controls. I want to be able to open a child window, do something on it, and when it closes I want to rebind only one of the two data controls on the parent page. I have the control I want to update within an UpdatePanel so would like to call rebind it and call UpdatePanel.Update().
View 2 RepliesI have a modal formview with insertitemtemplate. I have to click the insert button twice to fire the event.
But if I do not insert any values, only one click is required and the validationgroup fires. But if I enter all valid values, I need to click twice and the event does not fire during the first click. But I need CausesValidation = false because to required field validators.
How to avoid two clicks to fire the event if the formview is valid
[Code]....
I am fairly new to the asp.net and experimenting with it to learn the page life cycle. Here is a problem that I have been unable to resolve for past few days.I have a hosting page (.aspx). Then I have two user controls (.ascx). The page has a place holder control in which it loads the user controls one at a time based on the application flow. First user control is loaded on application start up. It has a "continue" button. Continue button click loads the Second user control that has two buttons - "Back" and "Submit". Obviously the "Back" button should load the first user control again and Submit button should submit the form data.
View 3 RepliesHow to fire a button click event inside a grid view.
View 2 RepliesHere's an odd one that I've never seen before. Only on IIS, not in Cassini but in all web browsers I have a button that posts back and the page_load event fires, but the actual button click event doesn't fire. there is no re-writing of the page or anything else happening.
View 4 Repliesi have a repeater with a button in the footer template which i want to be able to update any of the items that are added (update quantites/totals/delete the item).
however the 'UpdateOrderDetails' event never fires when the button is clicked.
here is the code within the repeater...
<ItemTemplate>
<tr>
<td>
<asp:CheckBox ID="chkDelete" runat="server" />
<asp:HiddenField ID="hidProduct_Key" runat="server" />
[Code].....
but this procedure is never called when the button is clicked, so wondered what i need to do to get this working
i have one grid and one button when i click on that button then it expand and showing another grid under the row of parent grid how to do that.
View 2 RepliesI have a dynamically loaded usercontrol
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="ucEditPanel.ascx.cs"